ASTM B 8 : 2011 : R2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
Hardcopy , PDF
24-11-2023
English
24-04-2017
CONTAINED IN VOL. 02.03, 2017 Defines bare concentric-lay-stranded conductors made from round copper wires, either uncoated or coated with tin, lead, or lead alloy for general use for electrical purposes.
Committee |
B 01
|
DevelopmentNote |
Supersedes ASTM B 87 (01/2002)
|
DocumentType |
Standard
|
Pages |
8
|
ProductNote |
Reconfirmed 2017
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers bare concentric-lay-stranded conductors made from round copper wires, either uncoated or coated with tin, lead, or lead alloy for general use for electrical purposes. These conductors shall be constructed with a central core surrounded by one or more layers of helically laid wires.
Note 1:This specification also permits conductors for use as covered or insulated electrical conductors.
Note 2:Sealed conductors, that are intended to prevent longitudinal water propagation and are further covered/insulated, are also permitted within the guidelines of this specification.
1.2For the purposes of this specification, conductors are classified as follows (Explanatory Note 1 and Note 2):
1.2.1Class AA—For bare conductors usually used in overhead lines.
1.2.2Class A—For conductors to be covered with weather-resistant (weather-proof), slow-burning materials, and for bare conductors where greater flexibility than is afforded by Class AA is required.
1.2.3Class B—For conductors to be insulated with various materials such as rubber, paper, varnished cloth, and so forth, and for the conductors indicated under Class A where greater flexibility is required.
1.2.4Class C and Class D—For conductors where greater flexibility is required than is provided by Class B conductors.
1.3The SI values for density are regarded as the standard. For all other properties, the inch-pound values are to be regarded as standard and the SI units may be approximate.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM B 784 : 2001 : R2017 : EDT 1 | Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables |
ASTM F 1835 : 1997 : R2018 | Standard Guide for Cable Splicing Installations |
ASTM B 913 : 2021 | Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors |
ASTM F 1883 : 2020 | Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units |
ASTM B 173 : 2017 | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors |
ASTM B 226 : 2011 : R2021 | Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors |
ASTM B 174 : 2017 : REDLINE | Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors |
ASTM B 1 : 1995 | Standard Specification for Hard-Drawn Copper Wire |
ASTM B 189 : 2005 : R2021 | Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
ASTM B 3 : 1995 | Standard Specification for Soft or Annealed Copper Wire |
ASTM B 354 : 2023 | Standard Terminology Relating to Uninsulated Metallic Electrical Conductors |
ASTM B 246 : 2015 | Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes |
ASTM B 172 : 2017 : REDLINE | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors |
ASTM B 189 : 2005 : R2015 | Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes |
ASTM B 246 : 2015 : REDLINE | Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes |
ASTM B 246 : 2015 : R2021 | Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes |
ASTM B 174 : 1995 | Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors |
ASTM B 173 : 2017 : REDLINE | Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors |
ASTM B 193 : 2016 : REDLINE | Standard Test Method for Resistivity of Electrical Conductor Materials |
ASTM B 354 : 2019 | Standard Terminology Relating to Uninsulated Metallic Electrical Conductors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.