ASTM B 837 : 2019
Current
The latest, up-to-date edition.
Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems
Hardcopy , PDF
English
01-10-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
B 05
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification establishes the requirements for Type GAS seamless Copper UNS No. C12200 tube for use in above ground natural gas and liquified petroleum (LP) gas fuel distribution systems, commonly assembled with flared fittings or brazed joints.
Note 1:Tube temper, size, and joining method are determined by installation code requirements.
1.2Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3The following safety hazard caveat pertains only to the test method(s) portion, Section 17, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 18 : 2024 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E 8/E8M : 2024 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 255 : 2023 | Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
| ASTM E 8/E8M : 2016 : REV A : EDT 1 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM E 29 : 2013 : R2019 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM B 577 : 2024 | Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper |
| ASTM B 846 : 2019 : REV A | Standard Terminology for Copper and Copper Alloys |
| ASTM E 8/E8M : 2021 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM B 968/B968M : 2016 | Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube |
| ASTM E 18 : 2022 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM E 29 : 2002 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
| ASTM E 243 : 2018 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes |
| ASTM E 53 : 1998 | Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry |
| ASTM E 18 : 2020 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM B 577 : 2019 | Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper |
| ASTM E 3 : 2011 : R2017 | Standard Guide for Preparation of Metallographic Specimens |
| ASTM E 255 : 1991 : R1997 | Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition |
| ASTM B 846 : 2024 | Standard Terminology for Copper and Copper Alloys |
| ASTM E 527 : 2023 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM E 527 : 2016 | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM E 8/E8M : 2022 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM B 900 : 2016 | Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies |
| ASTM E 243 : 2024 | Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes |
| ASTM E 53 : 2007 : R2013 | Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry (Withdrawn 2022) |
| ASTM B 153 : 2022 | Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing |
| ASTM B 900 : 2016 : R2022 | Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies |
| ASTM E 18 : 2019 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
| ASTM B 968/B968M : 2016 : R2022 | Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube |
| ASTM B 153 : 2011 : R2017 | Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing |
| ASTM E 112 : 2013 : R2021 | Standard Test Methods for Determining Average Grain Size |
| ASTM E 112 : 2013 | Standard Test Methods for Determining Average Grain Size |
| ASTM B 601 : 2024 | Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast |
| ASTM E 255 : 2007 : R2014 | Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition (Withdrawn 2023) |
| ASTM B 601 : 2018 : REV A | Standard Classification for Temper Designations for Copper and Copper Alloys—Wrought and Cast |
| ASTM E 112 : 2024 | Standard Test Methods for Determining Average Grain Size |
| ASTM E 29 : 2022 | Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.