ASTM B 85 : 2003
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Aluminum-Alloy Die Castings
Available format(s)
PDF
Language(s)
English
Published date
10-04-2003
Superseded date
11-11-2014
Superseded by
€69.17
Excluding VAT
CONTAINED IN VOL. 02.02, 2005 Deals with aluminum-alloy die castings in ten alloy compositions.
| Committee |
B 07
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This specification covers aluminum-alloy die castings of all compositions. Thirteen of the most commonly die cast alloy compositions are specified, designated as shown in Table 1.
1.2 Alloy and temper designations are in accordance with ANSI H35.1. The equivalent unified numbering system alloy designations are in accordance with Practice E 527.
1.3 For acceptance criteria for inclusion of new aluminum and aluminum alloys and their properties in this specification, see Annex A1 and Annex A2.
1.4 Units—The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are mathematical conversions to SI units which are provided for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
| MIL-G-3111 Revision C:1961 | Generators, Electric, Direct-Current (Naval Shipboard Use) (No S/S Document) |
| 17/30360051 DC : 0 | BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| MIL-B-53102 Base Document:1990 | Berm Liner Assemblies, Arctic Service (No S/S Document) |
| MIL-T-24103 Base Document:1964 | THERMOMETER, SELF-INDICATING, 5-INCH SCALE SIZE, LIQUID-IN-GLASS, MERCURY (NO S/S DOCUMENT) |
| PREN 6068 : 200P2 | AEROSPACE SERIES - PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, BUTTON HANDLE |
| ASTM C 599 : 1991 : R1995 : EDT 1 | Standard Specification for Conical Process Glass Pipe and Fittings (Withdrawn 2002) |
| SAE AS95234A | Connectors, Electrical, Reverse Bayonet, General Specification for |
| MIL-T-53101 Base Document:1990 | TANKS, FABRIC, COLLAPSIBLE: 3,000, 10,000 AND 20,000 GALLON, PETROLEUM, LOW TEMPERATURE (NO S/S DOCUMENT) |
| MIL-DTL-1716 Revision J:1997 | Pole, Tent, Telescopic, Adjustable 5 Feet to 9 Feet, Magnesium |
| MIL F 39000 : A | FLANGES, WAVEGUIDE, RIDGE GENERAL SPECIFICATION FOR |
| MIL-DTL-26518 Revision C:2000 | Connectors, Electrical, Miniature, Rack and Panel Environment Resistant, 200 Degrees C Ambient Temperature General Specification for ( For new design use MIL-DTL-83733) |
| MIL-DTL-28731 Revision F:2007 | Connectors, Electrical, Rectangular, Removable Contact, Formed Blade, Fork Type (for Rack and Panel and other Applications) General Specification for |
| MIL-T-52983 Revision G:1994 | Tanks, Fabric, Collapsible: 3,000, 10,000, 20,000, AND 50,000 Gallon, Fuel |
| MIL F 24044 : 0 | FLANGE, COAXIAL LINE, RIGID AIR DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL-G-24659 Revision A:1993 | Gauge, Differential, Dial Indicating (No S/S Document) |
| ASTM E 784 : 1989 : R2017 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| MIL L 12632 : D | LOUDSPEAKER, PERMANENT MAGNET (ENCASED, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), GENERAL SPECIFICATION FOR |
| SAE AIR5919B | Alternatives to Cadmium Plating |
| ASTM B 253 : 2011 : R2017 | Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| MIL-DTL-5015 Revision H:2000 | Connectors, Electrical, Circular Threaded, AN Type, General Specification for (S/S by SAE-AS50151) |
| MIL-G-18997 Revision E:1991 | GAUGE, PRESSURE, DIAL INDICATING |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| MIL F 3922 : B | FLANGE, WAVEGUIDE, GENERAL PURPOSE GENERAL SPECIFICATION FOR |
| MIL T 0053055 : B | TANK, 3000 GALLON & 4600 GALLON FABRIC, COLLAPSIBLE, DRINKING WATER, SEMI-TRAILER MOUNTED |
| MIL-DTL-12520 Revision D:2005 | Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for |
| QQ-A-591 Revision F:1981 | Aluminum Alloy Die Castings (S/S by Appropriate Portions of the Document ASTM-B85, ASTM-B26, ASTM-B108 and SAE-J452, SAE-J453, SAE-AMS4290, SAE-AMS4291) |
| MIL-DTL-2 Revision G:2006 | Valves, Cylinder, Gas (for Compressed or Liquefied Gases), General Specification for (S/S by A-A-59860) |
| MIL-DTL-28731-38 Revision A:2004 | Connector, Electrical, Rectangular Shield, for use with MIL-DTL-28731/32 |
| AWWA C704 : 2015 | PROPELLER-TYPE METERS FOR WATERWORKS APPLICATIONS |
| ASTM E 784 : 1989 : R2000 : EDT 1 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM E 1379 : 1990 : R2005 | Standard Specification for Laboratory Glass Dewar Flask |
| MIL-DTL-55302-42 Revision C:2007 | Connectors, Printed Circuit Subassembly and Accessories: Receptacle, Electrical, Polarized Shell, Female, .100 Inch Contact Spacing, Removable Crimp Contacts (No S/S Document) |
| SAE AS50151C | Connectors, Electrical, Circular Threaded, AN Type, General Specification For |
| MIL T 20177 : D NOTICE 1 | MILITARY SPECIFICATION TRAINING AID, MODEL BRIDGE, FOR PANEL BRIDGE, M2 BAILEY TYPE |
| MIL-F-63446 Revision B:1994 | Fuzes, General Purpose Grenade: M230 and M231 (Practice) |
| MIL-T-53066 Revision B:1994 | Tank, Fabric, Collapsible 5,000 Barrel, Fuel |
| ARINC 404B-2:2015 | CONNECTORS, RACK AND PANEL, RECTANGULAR REAR RELEASE CRIMP CONTACTS |
| SAE AMSQQA591B | Aluminum Alloy Die Castings |
| ASTM E 1379 : 1990 : R2010 | Standard Specification for Laboratory Glass Dewar Flask |
| SAE AS95234 | Connectors, Electrical, Reverse Bayonet, General Specification For |
| ASTM E 784 : 1989 : R2005 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM E 784 : 1989 : R1996 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM E 784 : 1989 : R2011 | Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp |
| ASTM E 1379 : 1990 : R2016 | Standard Specification for Laboratory Glass Dewar Flask |
| ASTM B 881 : 2017 : REDLINE | Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products |
| MS3481 Revision A:2007 | Tool, Connector Assembly, for MIL-DTL-26482 Connectors |
| ASTM B 253 : 2011 | Standard Guide for Preparation of Aluminum Alloys for Electroplating |
| PREN 13611 : DRAFT 2017 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ASTM E 1379 : 1990 : R1999 : EDT 1 | Standard Specification for Laboratory Glass Dewar Flask |
| ASME B40.200:2008(R2013) | Thermometers, Direct Reading and Remote Reading |
| ASME A112.6.1M : 1997 : R2008 | FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE |
| ASME A112.6.1M : 1997 : R2012 | FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE |
| ASME A112.6.1M : 1997 : R2002 | FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE |
| ASME B31.5 : 2016 | REFRIGERATION PIPING AND HEAT TRANSFER COMPONENTS |
| ASME B40.200 : 2008 | THERMOMETERS, DIRECT READING AND REMOTE READING |
| ASME A112.6.1M : 1997 : R2017 | FLOOR AFFIXED SUPPORTS FOR OFF-THE-FLOOR PLUMBING FIXTURES FOR PUBLIC USE |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| ASTM E 607 : 2002 | Standard Test Method for Atomic Emission Spectrometric Analysis Aluminum Alloys by the Point to Plane Technique Nitrogen Atmosphere |
| ASTM E 505 : 2015 : REDLINE | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings |
| FED-STD-184 Revision B:1977 | Identification Marking of Aluminum, Magnesium, and Titanium (S/S by SAE-AMS2808, SAE-AMS2809, and ASTM-B666/B666M) |
| FED-STD-123 Revision H:2007 | Marking for Shipment (Civil Agencies) |
| ASTM E 716 : 2016 : REDLINE | Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry |
| ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ASTM E 101 : 1991 | Test Method for Spectrographic Analysis of Aluminum and Aluminum Alloys by the Point-To-Plane Technique (Withdrawn 1996) |
| ASTM E 227 : 1990 : R1996 | Standard Test Method for Optical Emission Spectrometric Analysis of Aluminum and Aluminum Alloys by the Point-to-Plane Technique (Withdrawn 2002) |
| ANSI H35.1 : 2006 | ALLOY AND TEMPER DESIGNATION SYSTEMS FOR ALUMINUM |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| ASTM B 660 : 2015 : REDLINE | Standard Practices for Packaging/Packing of Aluminum and Magnesium Products |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.