ASTM B 900 : 2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Packaging of Copper and Copper Alloy Mill Products for U.S. Government Agencies
Hardcopy , PDF
11-10-2022
English
08-11-2016
Committee |
B 05
|
DocumentType |
Standard Practice
|
Pages |
13
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice establishes requirements for packaging, packing, and marking intended to ensure proper and safe storage and transportation of copper and copper alloy mill products, both foreign and domestic, for direct shipment to government activities or shipment processed at a military activity or agency. This practice details the materials, methods, containers, and procedures for the preparation for shipment of copper and copper alloy mill products. Mill products wherein copper is the basic metal are within the scope of this practice. Commercial packaging establishes the minimum requirements that apply unless Level A or B packing is specified (see 6.1).
1.2Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units which are provided for information only and are not considered standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
ASTM B 543/B543M : 2018 | Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube |
ASTM B 359/B359M : 2018 | Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins |
ASTM B 837 : 2019 | Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems |
ASTM B 280 : 2020 | Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service |
ASTM B 43 : 2020 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
ASTM B 306 : 2020 | Standard Specification for Copper Drainage Tube (DWV) |
ASTM B 88M : 2020 | Standard Specification for Seamless Copper Water Tube (Metric) |
ASTM B 19 : 2020 | Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks |
ASTM B 88 : 2020 | Standard Specification for Seamless Copper Water Tube |
ASTM B 250/B250M : 2019 | Standard Specification for General Requirements for Wrought Copper Alloy Wire |
ASTM B 249/B249M : 2020 | Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings |
ASTM B 187/B187M : 2020 | Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes |
ASTM B 640 : 2012 : REV A : R2021 | Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service |
ASTM B 1017 : 2021 | Standard Specification for Seamless Copper-Iron Tube for Air Conditioning and Refrigeration |
ASTM B 1018 : 2021 | Standard Specification for Seamless Copper-Iron Tube for Air Conditioning and Refrigeration Field Service |
ASTM B 395/B395M : 2018 | Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes |
ASTM B 950 : 2022 | Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys |
ASTM B 1003 : 2016 | Standard Specification for Seamless Copper Tube for Linesets |
ASTM D 143 : 2022 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM D 5168 : 2012 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
ASTM D 3951 : 2010 | Standard Practice for Commercial Packaging |
ASTM D 5330/D5330M : 1993 : EDT 1 | Standard Specification for Pressure-Sensitive Tape for Packaging, Filament- Reinforced |
ASTM F 1667 : 2005 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM D 4444 : 1992 : R1998 : EDT 1 | Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters |
ASTM D 3951 : 1998 | Standard Practice for Commercial Packaging |
ASTM F 1667 : 2018 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM D 1974/D1974M : 2022 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
ASTM D 5168 : 2012 : R2017 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
ASTM F 1667 : 2013 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM D 143 : 2014 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM F 1667 : 2011 : REV A | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM F 1667 : 2011 : REV A : EDT 1 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM F 1667 : 2015 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM D 5168 : 2003 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
ASTM D 4444 : 2008 | Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters |
ASTM F 1667 : 2021 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM F 1667 : 2010 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM F 1667 : 2018 : REV A | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM D 3951 : 2015 | Standard Practice for Commercial Packaging |
ASTM D 4444 : 1992 : R2003 | Standard Test Methods for Use and Calibration of Hand-Held Moisture Meters |
ASTM D 4444 : 2013 | Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters |
ASTM D 3951 : 2018 | Standard Practice for Commercial Packaging |
ASTM D 4444 : 2013 : R2018 | Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters |
ASTM D 5168 : 2022 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
ASTM F 1667 : 2000 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM F 1667 : 2003 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM F 1667 : 2020 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM F 1667 : 2001 : REV A | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM F 1667 : 2011 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM F 1667 : 2002 : REV A | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM D 143 : 2021 | Standard Test Methods for Small Clear Specimens of Timber |
ASTM F 1667 : 2017 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM D 1974/D1974M : 2016 | Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes |
ASTM D 779 : 1994 : R1998 | Standard Test Method for Water Resistance of Paper, Paperboard, and Other Sheet Materials by the Dry Indicator Method |
ASTM D 828 : 2016 : EDT 1 | Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
ASTM F 1667 : 2002 | Standard Specification for Driven Fasteners: Nails, Spikes, and Staples |
ASTM D 828 : 2022 | Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus |
ASTM D 5168 : 1998 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
ASTM D 5168 : 2009 | Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.