ASTM B 925 : 2015 : R2022
Current
The latest, up-to-date edition.
Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens
Hardcopy , PDF
English
04-03-2022
Committee |
B 09
|
DocumentType |
Standard Practice
|
Pages |
16
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1These standard practices cover the specifications for those uniaxially compacted test specimens that are used in ASTM standards, the procedures for producing and preparing these test specimens, and reference the applicable standards.
1.2Basic tool design and engineering information regarding the tooling that is required to compact the test specimens and machining blanks are contained in the annexes.
1.3This standard is intended to be a comprehensive one-source document that can be referenced by ASTM test methods that utilize PM test specimens and in ASTM PM material specifications that contain the engineering data obtained from these test specimens.
1.4These practices are not applicable to metal powder test specimens that are produced by other processes such as cold isostatic pressing (CIP), hot isostatic pressing (HIP), powder forging (PF) or metal injection molding (MIM). They do not pertain to cemented carbide materials.
1.5Detailed information on PM presses, compacting tooling and sintering furnaces, their design, manufacture and use are not within the scope of these practices.
1.6The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.7This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM B 610 : 2019 | Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction |
ASTM B 331 : 2020 | Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction |
ASTM B 312 : 2020 | Standard Test Method for Green Strength of Specimens Compacted from Metal Powders |
ASTM B 939 : 2021 | Standard Test Method for Radial Crushing Strength, <emph type="bdit">K</emph>, of Powder Metallurgy (PM) Bearings and Structural Materials |
ASTM B 528 : 2016 : R2020 : EDT 1 | Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens |
ASTM E 23 : 2018 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM B 823 : 2020 | Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts |
ASTM A 811 : 2015 : R2022 | Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques |
ASTM E 18 : 2024 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM E 23 : 2024 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM B 963 : 2024 | Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
ASTM E 1876 : 2021 | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM E 228 : 2017 | Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
ASTM E 18 : 2022 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM E 23 : 2022 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM E 1876 : 2022 | Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration |
ASTM E 18 : 2020 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM B 963 : 2022 | Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
ASTM A 839 : 2015 | Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications |
ASTM B 243 : 2022 | Standard Terminology of Powder Metallurgy |
ASTM B 963 : 2017 | Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
ASTM E 23 : 2023 : REV A | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM A 811 : 2015 | Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques |
ASTM A 341/A341M : 2016 : R2022 | Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods |
ASTM A 839 : 2015 : R2023 | Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications |
ASTM A 927/A927M : 2018 | Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method |
ASTM B 962 : 2017 | Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
ASTM B 610 : 2024 | Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction |
ASTM B 823 : 2020 : R2024 | Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts |
ASTM E 23 : 2023 | Standard Test Methods for Notched Bar Impact Testing of Metallic Materials |
ASTM B 243 : 2023 | Standard Terminology of Powder Metallurgy |
ASTM E 18 : 2019 | Standard Test Methods for Rockwell Hardness of Metallic Materials |
ASTM A 927/A927M : 2018 : R2022 | Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method |
ASTM A 341/A341M : 2016 | Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods |
ASTM A 904 : 2020 | Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts |
ASTM B 610 : 2023 | Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders Intended for Die Compaction |
ASTM B 243 : 2024 | Standard Terminology of Powder Metallurgy |
ASTM B 439 : 2021 | Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated) |
ASTM B 962 : 2023 | Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle |
ASTM E 228 : 2022 | Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.