ASTM B 968/B968M : 2016 : R2022
Current
The latest, up-to-date edition.
Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube
Hardcopy , PDF
English
11-05-2022
Committee |
B 05
|
DocumentType |
Test Method
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method establishes the requirements for the flattening test for copper and copper alloy pipe and tube of all sizes. The method addresses both inch-pound and metric considerations, and both seamless and welded product.
1.2Units—The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM B 552 : 2019 | Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants |
ASTM B 111/B111M : 2018 : REV A | Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock |
ASTM B 153 : 2011 : R2017 | Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing |
ASTM B 135/B135M : 2017 | Standard Specification for Seamless Brass Tube |
ASTM B 467 : 2014 | Standard Specification for Welded Copper-Nickel Pipe |
ASTM B 43 : 2020 | Standard Specification for Seamless Red Brass Pipe, Standard Sizes |
ASTM B 395/B395M : 2018 | Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes |
ASTM B 466/B466M : 2018 | Standard Specification for Seamless Copper-Nickel Pipe and Tube |
ASTM B 956 : 2019 : EDT 1 | Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins |
ASTM B 587 : 2019 | Standard Specification for Welded Brass Tube |
ASTM B 1014 : 2020 | Standard Specification for Welded Copper and Copper Alloy Condenser and Heat Exchanger Tubes with a Textured Surface(s) |
ASTM B 543/B543M : 2018 | Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube |
ASTM B 68/B68M : 2019 | Standard Specification for Seamless Copper Tube, Bright Annealed |
ASTM B 640 : 2012 : REV A : R2021 | Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service |
ASTM B 42 : 2020 | Standard Specification for Seamless Copper Pipe, Standard Sizes |
ASTM B 950 : 2021 : EDT 1 | Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys |
ASTM B 359/B359M : 2018 | Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins |
ASTM B 88 : 2020 | Standard Specification for Seamless Copper Water Tube |
ASTM B 837 : 2019 | Standard Specification for Seamless Copper Tube for Natural Gas and Liquified Petroleum (LP) Gas Fuel Distribution Systems |
ASTM B 846 : 2019 : REV A | Standard Terminology for Copper and Copper Alloys |
ASTM B 846 : 2024 | Standard Terminology for Copper and Copper Alloys |
ASTM B 153 : 2011 : R2017 | Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.