ASTM C 10/C10M : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Natural Cement
Hardcopy , PDF
02-02-2024
English
14-11-2019
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 01
|
| DocumentType |
Standard
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers natural cement and quick-setting natural cement.
Note 1:Examples of typical past uses of natural cement include unit masonry mortar, cement plaster, grout, whitewash, and concrete.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Values in SI units [or inch-pound units] shall be obtained by measurement in SI units [or inch-pound units] or by appropriate conversion, using the Rules for Conversion and Rounding given in IEEE/ASTM SI 10, of measurements made in other units [or SI units]. Values are stated in only SI units when inch-pound units are not used in practice.
1.3The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1713 : 2023 | Standard Specification for Mortars for the Repair of Historic Masonry |
| ASTM C 109/C109M : 2020 : REV B | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
| ASTM C 305 : 2014 | Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency |
| ASTM C 465 : 2019 | Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements |
| ASTM C 183/C183M : 2016 | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
| ASTM C 191 : 2019 | Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle |
| ASTM C 188 : 2017 | Standard Test Method for Density of Hydraulic Cement |
| ASTM C 109/C109M : 2021 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
| ASTM C 185 : 2015 : REV A | Standard Test Method for Air Content of Hydraulic Cement Mortar |
| ASTM C 187 : 2023 | Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste |
| ASTM C 688 : 2022 | Standard Specification for Functional Additions for Use in Hydraulic Cements |
| ASTM C 191 : 2018 : REV A | Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle |
| ASTM C 204 : 2024 | Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus |
| ASTM C 465 : 2023 | Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements |
| ASTM C 183/C183M : 2022 | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
| ASTM C 151/C151M : 2018 | Standard Test Method for Autoclave Expansion of Hydraulic Cement |
| ASTM C 151/C151M : 2023 | Standard Test Method for Autoclave Expansion of Hydraulic Cement |
| ASTM C 109/C109M : 2020 : REV A | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
| ASTM C 150/C150M : 2021 | Standard Specification for Portland Cement |
| ASTM C 204 : 2023 | Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus |
| ASTM C 778 : 2017 | Standard Specification for Standard Sand |
| ASTM C 191 : 2021 | Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle |
| ASTM C 114 : 2023 | Standard Test Methods for Chemical Analysis of Hydraulic Cement |
| ASTM C 109/C109M : 2016 : REV A | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
| ASTM C 114 : 2009 | Standard Test Methods for Chemical Analysis of Hydraulic Cement |
| ASTM C 188 : 2017 : R2023 | Standard Test Method for Density of Hydraulic Cement |
| ASTM C 183/C183M : 2023 | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
| ASTM C 204 : 2018 : EDT 1 | Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus |
| ASTM C 187 : 2016 | Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste |
| ASTM C 150/C150M : 2020 | Standard Specification for Portland Cement |
| ASTM C 150/C150M : 2022 | Standard Specification for Portland Cement |
| ASTM C 688 : 2014 | Standard Specification for Functional Additions for Use in Hydraulic Cements |
| ASTM C 114 : 2018 | Standard Test Methods for Chemical Analysis of Hydraulic Cement |
| ASTM C 114 : 2022 | Standard Test Methods for Chemical Analysis of Hydraulic Cement |
| ASTM C 778 : 2021 | Standard Specification for Standard Sand |
| ASTM C 465 : 2022 | Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.