ASTM C 1007 : 2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
Hardcopy , PDF
12-11-2024
English
01-05-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 11
|
| DocumentType |
Standard
|
| Pages |
4
|
| ProductNote |
This standard is also refers to AISI S100,AWS D1.3.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the installation and erection requirements for load bearing (transverse and axial) steel studs and related accessories 0.0329 in. (0.836 mm) to 0.1120 in. (2.845 mm) thick.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 840 : 2019 : REV B | Standard Specification for Application and Finishing of Gypsum Board |
| ASTM C 1280 : 2018 | Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing |
| ASTM C 11 : 2018 : REV B | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM C 844 : 2015 | Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster |
| ASTM C 1467/C1467M : 2000 : R2016 | Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 1467/C1467M : 2000 : R2021 | Standard Specification for Installation of Molded Glass Fiber Reinforced Gypsum Parts |
| ASTM C 844 : 2015 : R2021 | Standard Specification for Application of Gypsum Base to Receive<brk/> Gypsum Veneer Plaster |
| ASTM C 840 : 2023 | Standard Specification for Application and Finishing of Gypsum Board |
| ASTM C 1280 : 2018 : R2023 | Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing |
| ASTM C 1063 : 2023 | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
| ASTM C 1063 : 2019 : REV A | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
| ASTM C 841 : 2023 | Standard Specification for Installation of Interior Lathing and Furring |
| ASTM C 11 : 2023 | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM C 11 : 2024 | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM C 1063 : 2020 | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
| ASTM C 1063 : 2021 | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
| ASTM C 1063 : 2020 : REV A | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
| ASTM C 841 : 2003 : R2018 | Standard Specification for Installation of Interior Lathing and Furring |
| ASTM C 954 : 2022 | Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness |
| ASTM C 954 : 2018 | Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness |
| ASTM C 1063 : 2022 : REV A | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
| ASTM C 11 : 2024 : REV A | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM C 1063 : 2022 | Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.