ASTM C 1036 : 2016 : REDLINE
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Flat Glass
24-05-2021
English
01-11-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.02, 2017 Defines the requirements for annealed, monolithic flat soda-lime glass supplied as cut sizes or stock sheets.
| Committee |
C 14
|
| DevelopmentNote |
Supersedes DD G 451 (09/2003)
|
| DocumentType |
Redline
|
| Pages |
12
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the requirements for annealed, monolithic flat soda-lime glass supplied as cut sizes or stock sheets.
1.2This specification is applicable for laboratory and field evaluation only to the extent that such evaluation can be carried out in accordance with the test method(s) prescribed herein.
1.3This specification covers the quality requirements of flat, transparent, clear, and tinted glass. This glass is intended to be used primarily for architectural glazing products including: coated glass, insulating glass units, laminated glass, mirrors, spandrel glass, or similar uses.
Note 1:Reflective distortion is not addressed in this specification.
1.4This specification covers the quality requirements of patterned or wired glasses intended to be used primarily for decorative and general glazing applications.
1.5The values given in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| MIL-HDBK-11991 Base Document:1996 | DESIGN OF ELECTRICAL, ELECTRONIC, AND ELECTRO-MECHANICAL EQUIPMENT, GUIDED MISSILE AND ASSOCIATED WEAPONS SYSTEMS |
| MIL B 11352 : G | BLOCK, VISION, BULLET RESISTANT (METRIC) |
| ASTM G 24 : 2013 : REDLINE | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
| ISO 20492-3:2010 | Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage |
| ASTM C 1322 : 2015 : REDLINE | PRACTICE FOR FRACTOGRAPHY AND CHARACTERIZATION OF FRACTURE ORIGINS IN ADVANCED CERAMICS |
| ASTM C 964 : 2007 : R2012 | Standard Guide for Lock-Strip Gasket Glazing |
| ASTM F 782 : 2001 : R2012 | Standard Specification for Doors, Furniture, Marine |
| ASTM C 1464 : 2016 : REDLINE | Standard Specification for Bent Glass |
| MIL-DTL-5099 Revision C:2011 | INDICATOR, CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| ASTM F 3007 : 2013 | Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass |
| ASTM E 546 : 2014 : REDLINE | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units |
| MIL-DTL-32201 Revision A:2016 | MIRROR ASSEMBLIES, REARVIEW, HMMWV STYLE, 12X8 INCH (NOMINAL), EXTERIOR MOUNTING |
| ASTM C 1443 : 1999 : R2010 | Standard Specification for Glasses, Portlight, Circular, Fully Tempered |
| ASTM C 1443 : 1999 : R2005 | Standard Specification for Glasses, Portlight, Circular, Fully Tempered |
| ASTM C 1367 : 2006 : R2012 | Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures |
| ASTM C 1375 : 2000 : R2009 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
| ASCE 30 00 : 2000 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
| ASTM E 1300 : 2016 : REDLINE | Standard Practice for Determining Load Resistance of Glass in Buildings |
| ASTM C 1443 : 1999 : R2016 | Standard Specification for Glasses, Portlight, Circular, Fully Tempered (Withdrawn 2021) |
| ASTM C 1375 : 2000 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
| AA-L-2931 Base Document:1997 | LOCKER, CLOTHING, STEEL, TWO DOOR |
| A-A-3002 Base Document:1996 | |
| DD-M-411 Revision C:1990 | |
| ASTM C 1652/C1652M : 2014 : REDLINE | Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids |
| ASCE T&DI 21 13 : 2013 | AUTOMATED PEOPLE MOVER STANDARDS |
| ASTM E 2461 : 2012 | Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs |
| ASTM C 1422/C1422M : 2015 : REDLINE | Standard Specification for Chemically Strengthened Flat Glass |
| ASTM C 1443 : 1999 | Standard Specification for Glasses, Portlight, Circular, Fully Tempered |
| ASTM D 4973 : 1993 | Specification for White Rigid Poly(Vinyl Chloride)(PVC) Insulating Storm Windows (Withdrawn 1999) |
| ISO 20492-1:2008 | Glass in buildings - Insulating glass — Part 1: Durability of edge seals by climate tests |
| ASTM C 1349 : 2017 : REDLINE | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
| ASTM E 773 : 2001 | Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units (Withdrawn 2010) |
| 08/30167401 DC : 0 | BS ISO 20492-3 - GLASS IN BUILDINGS - INSULATING GLASS - PART 3: GAS CONCENTRATION AND GAS LEAKAGE |
| MIL G 2857 : B | GLASS, HEAT TREATED, GLAZING, RECTANGULAR (FOR BRIDGE WINDOWS) |
| ASTM E 576 : 2014 : REDLINE | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position |
| ISO 28278-1:2011 | Glass in building — Glass products for structural sealant glazing — Part 1: Supported and unsupported monolithic and multiple glazing |
| MIL-DTL-11352 Revision K:2013 | BLOCK, VISION: BULLET-RESISTANT (METRIC) |
| ASTM F 782 : 2001 | Standard Specification for Doors, Furniture, Marine |
| ASTM F 782 : 2001 : R2007 | Standard Specification for Doors, Furniture, Marine |
| ASTM D 4099 : 1995 | Standard Specification for Poly(Vinyl Choride)(PVC) Prime Windows and Sliding Glass Doors (Withdrawn 1999) |
| ASTM E 2461 : 2012 : R2017 | Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs |
| ASTM C 1367 : 2006 | Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures |
| ASCE T&DI 21.3 : 2008 | AUTOMATED PEOPLE MOVER STANDARDS - PART 3 |
| ASCE/SEI 30 14 : 2014 | GUIDELINE FOR CONDITION ASSESSMENT OF THE BUILDING ENVELOPE |
| ASCE 21 00 : 2002 | AUTOMATED PEOPLE MOVER STANDARDS - PART 3 |
| ASTM C 1375 : 2000 : R2005 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
| ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
| ASTM E 2136 : 2004 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability |
| ASTM C 964 : 2007 | Standard Guide for Lock-Strip Gasket Glazing |
| 08/30172148 DC : DRAFT MAY 2008 | BS ISO 28278-1 - GLASS IN BUILDING - GLASS PRODUCTS FOR STRUCTURAL SEALANT GLAZING - PART 1: SUPPORTED AND UNSUPPORTED MONOLITHIC AND MULTIPLE GLAZING |
| MIL-PRF-46108 Revision C:1999 | Armor: Transparent |
| MIL A 46108 : B | ARMOR, TRANSPARENT, GLASS; GLASS/PLASTIC; PLASTIC LAMINATES (GENERAL SPECIFICATION) |
| CGSB 12.20 : M89 | STRUCTURAL DESIGN OF GLASS FOR BUILDINGS |
| CSA A440 : 2017 | NORTH AMERICAN FENESTRATION STANDARD/SPECIFICATION FOR WINDOWS, DOORS, AND SKYLIGHTS |
| ASTM C 1401 : 2014 : REDLINE | Standard Guide for Structural Sealant Glazing |
| A500-16 | Building guards |
| ISO 20492-2:2008 | Glass in buildings - Insulating glass — Part 2: Chemical fogging tests |
| ASTM C 1376 : 2015 : REDLINE | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM F 3006 : 2013 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
| ASTM C 1375 : 2000 : R2014 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
| ASTM E 3120 : 2017 | Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings |
| PIP ARS13120 : 2014 | PRE-ENGINEERED METAL BUILDINGS SPECIFICATION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.