ASTM C 1036 : 2021
Current
The latest, up-to-date edition.
Standard Specification for Flat Glass
Hardcopy , PDF
English
20-05-2021
Committee |
C 14
|
DocumentType |
Standard
|
Pages |
10
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers the requirements for annealed, monolithic flat soda-lime glass supplied as cut sizes or stock sheets.
1.2This specification is focused upon the quality of flat glass as produced. The specification is applicable for laboratory and field evaluation only to the extent that such evaluation can be carried out in accordance with the test method(s) prescribed herein.
1.3This specification covers the quality requirements of flat, transparent, clear, low-iron, and tinted glass. This glass is intended to be used primarily for architectural glazing products such as coated glass, insulating glass units, laminated glass, mirrors, and spandrel glass.
Note 1:Reflective distortion is not addressed in this specification.
1.4This specification covers the quality requirements of patterned or wired glasses intended to be used primarily for decorative and general glazing applications.
1.5The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard.
1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.7This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 1300 : 2016 | Standard Practice for Determining Load Resistance of Glass in Buildings |
ASTM E 2751/E2751M : 2017 : REV A | Standard Practice for Design and Performance of Supported Laminated Glass Walkways |
ASTM C 1422/C1422M : 2020 : REV A | Standard Specification for Chemically Strengthened Flat Glass |
ASTM C 1901 : 2021 : EDT 2 | Standard Test Method for Measuring Optical Retardation in Flat Architectural Glass |
ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
ASTM E 2188 : 2019 | Standard Test Method for Insulating Glass Unit Performance |
ASTM G 24 : 2013 | Standard Practice for Conducting Exposures to Daylight Filtered Through Glass |
ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
ASTM E 576 : 2014 : R2020 | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position |
ASTM C 1503 : 2018 | Standard Specification for Silvered Flat Glass Mirror |
ASTM E 2190 : 2019 | Standard Specification for Insulating Glass Unit Performance and Evaluation |
ASTM E 998 : 2019 | Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads |
ASTM F 3007 : 2019 | Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass |
ASTM F 2248 : 2019 | Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass |
ASTM C 704/C704M : 2015 : EDT 1 | Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature |
ASTM C 1376 : 2021 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
ASTM C 1048 : 2018 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
ASTM C 1464 : 2016 | Standard Specification for Bent Glass |
ASTM C 1900 : 2020 | Standard Practice for Weathering and Evaluation of Laminated Glass |
ASTM C 1652/C1652M : 2014 | Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids |
ASTM E 3120 : 2019 | Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings |
ASTM C 1651 : 2011 : R2018 | Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass |
ASTM E 546 : 2014 : R2020 | Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units |
ASTM C 964 : 2020 | Standard Guide for Lock-Strip Gasket Glazing |
ASTM C 1322 : 2015 : R2019 | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 2461 : 2012 : R2017 | Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs |
ASTM C 1172 : 2019 | Standard Specification for Laminated Architectural Flat Glass |
ASTM C 1375 : 2000 : R2020 | Standard Guide for Substrates Used in Testing Building Seals and Sealants |
ASTM C 1349 : 2017 | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
ASTM C 1367 : 2019 | Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures |
ASTM C 162 : 2005 : R2015 | Standard Terminology of<brk type="line"/> Glass and Glass Products |
ASTM C 162 : 2023 | Standard Terminology of Glass and Glass Products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.