ASTM C 1128 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
Hardcopy , PDF
20-02-2015
English
01-02-2015
Committee |
C 26
|
DocumentType |
Guide
|
Pages |
12
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide covers the preparation and characterization of working reference materials (WRM) that are produced by a laboratory for its own use in the analysis of nuclear fuel cycle materials. Guidance is provided for establishing traceability of WRMs to certified reference materials by a defined characterization process. The guidance provided is generic; it is not specific for a given material.
1.2The information provided by this guide is found in the following sections:
Section | |
Planning | 6 |
Preparation | 7 |
Packaging and Storage | 8 |
Characterization | 9 |
Statistical Analysis | 10 |
Documentation | 11 |
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
ASTM C 1108 : 2017 | Standard Test Method for Plutonium by Controlled-Potential Coulometry |
ASTM C 1297 : 2018 | Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1207 : 2010 : R2018 | Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting |
ASTM C 1165 : 2017 | Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H<inf>2</inf>SO<inf>4</inf> at a Platinum Working Electrode |
ASTM C 1133/C1133M : 2010 : R2018 | Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning |
ASTM C 1871 : 2018 : REV A | Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 761 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride |
ASTM C 1204 : 2014 | Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration |
ASTM C 1865 : 2018 | Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer |
ASTM C 791 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide |
ASTM C 1210 : 2018 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 759 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions |
ASTM C 1267 : 2017 | Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium |
ASTM C 809 : 2019 | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and Aluminum<brk/>Oxide-Boron Carbide Composite Pellets |
ASTM C 1068 : 2015 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 758 : 2018 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal |
ASTM C 1156 : 2018 | Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials |
ASTM C 1855 : 2018 | Standard Test Method for Determination of Uranium and Plutonium Concentration in Aqueous Solutions Using Hybrid K-Edge Densitometry and X-Ray Fluorescence |
ASTM C 1009 : 2013 : REV A | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM C 1832 : 2016 | Standard Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 1718 : 2010 : R2019 | Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning |
ASTM C 1316 : 2008 : R2017 | Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using <sup>252</sup>Cf Shuffler |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.