• There are no items in your cart

ASTM C 1156 : 2018

Current

Current

The latest, up-to-date edition.

Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

01-09-2018

€49.35
Excluding VAT

1.1This guide provides the basis for establishing calibration for a measurement method typically used in an analytical chemistry laboratory analyzing nuclear materials.

Committee
C 26
DocumentType
Guide
Pages
4
ProductNote
THIS STANDARD ALSO REFERS TO ASTM C 1215 , ASTM C 1297
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This guide provides the basis for establishing calibration for a measurement method typically used in an analytical chemistry laboratory analyzing nuclear materials. Guidance is included for such activities as preparing a calibration procedure, selecting a calibration standard, controlling calibrated equipment, and documenting calibration. The guide is generic and any required technical information specific for a given method must be obtained from other sources.

1.2The guidance information is provided in the following sections:

Section

General Considerations

5

Calibration Procedure

6

Calibration Standard

7

Control of Calibrated Equipment

8

Documentation

9

Keywords

10

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C 1316 : 2008 : R2017 Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using <sup>252</sup>Cf Shuffler
ASTM C 1672 : 2017 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM C 759 : 2018 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
ASTM C 1068 : 2015 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C 1625 : 2012 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry
ASTM C 1009 : 2013 : REV A Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
ASTM C 1832 : 2016 Standard Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal Ionization Mass Spectrometer
ASTM C 1718 : 2010 : R2019 Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning
ASTM C 1210 : 2018 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C 758 : 2018 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal

ASTM C 1215 : 2024 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C 1009 : 2013 : REV A Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
ASTM C 859 : 2023 Standard Terminology Relating to Nuclear Materials
ASTM C 1210 : 2018 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C 859 : 2014 : REV B Standard Terminology Relating to Nuclear Materials
ASTM C 859 : 2024 Standard Terminology Relating to Nuclear Materials
ASTM C 1128 : 2018 Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ASTM C 1009 : 1996 : EDT 1 Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry (Withdrawn 2005)
ASTM C 1210 : 1996 : EDT 1 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry (Withdrawn 2005)
ASTM C 1210 : 2021 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within Nuclear Industry
ASTM C 1128 : 1995 : EDT 1 Standard Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials
ASTM C 1068 : 1996 : EDT 1 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C 1210 : 2012 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C 1128 : 2015 Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ASTM C 1068 : 2003 : R2011 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C 1210 : 2006 Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C 1215 : 1992 : R2012 : EDT 1 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C 1068 : 2015 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C 1068 : 2021 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C 1297 : 2003 : R2011 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM C 1215 : 1992 : R1997 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C 1297 : 2003 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM C 859 : 2022 Standard Terminology Relating to Nuclear Materials
ASTM C 859 : 2022 : REV A Standard Terminology Relating to Nuclear Materials
ASTM C 1297 : 1995 : EDT 1 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
ASTM C 1128 : 2023 Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ASTM C 1128 : 2001 Standard Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials
ASTM C 1068 : 2003 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C 1215 : 2018 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C 1215 : 1992 : R2006 Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry
ASTM C 1009 : 2021 Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
ASTM C 1128 : 2001 : R2008 Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials
ASTM C 1009 : 2013 Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry
ASTM C 1009 : 2006 Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry
ASTM C 1297 : 2018 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.