• Shopping Cart
    There are no items in your cart

ASTM C 1222 : 2023

Current

Current

The latest, up-to-date edition.

Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

19-01-2023

€56.53
Excluding VAT

Committee
C 01
DocumentType
Standard Practice
Pages
5
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This practice covers the technical training and experience of laboratory testing personnel and identifies the minimum technical requirements for laboratory equipment used in testing of hydraulic cement as prescribed by ASTM.

1.2This practice provides minimum criteria for evaluating the capability of a laboratory to perform chemical or physical tests listed in the various specifications on hydraulic cement (see Note 1).

Note 1:Relevant hydraulic cement specifications are Specifications C91/C91M, C150/C150M, C595/C595M, C845/C845M, and C1157/C1157M.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C 150/C150M : 2024 Standard Specification for Portland Cement
ASTM C 109/C109M : 2020 : REV B Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM C 230/C230M : 2021 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
ASTM C 305 : 2014 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
ASTM C 91/C91M : 2023 Standard Specification for Masonry Cement
ASTM C 451 : 2019 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
ASTM C 191 : 2019 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C 125 : 2024 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 595/C595M : 2021 Standard Specification for Blended Hydraulic Cements
ASTM C 1157/C1157M : 2023 Standard Performance Specification for Hydraulic Cement
ASTM C 109/C109M : 2021 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM C 185 : 2015 : REV A Standard Test Method for Air Content of Hydraulic Cement Mortar
ASTM C 187 : 2023 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
ASTM C 191 : 2018 : REV A Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
ASTM C 266 : 2018 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
ASTM C 204 : 2024 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM C 430 : 2017 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM C 219 : 2020 : REV A Standard Terminology Relating to Hydraulic and Other Inorganic Cements
ASTM C 430 : 2024 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
ASTM C 151/C151M : 2018 Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM C 151/C151M : 2023 Standard Test Method for Autoclave Expansion of Hydraulic Cement
ASTM C 109/C109M : 2020 : REV A Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C 109/C109M : 2023 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50mm [2 in.] Cube Specimens)
ASTM C 204 : 2023 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM C 1157/C1157M : 2020 : REV A Standard Performance Specification for Hydraulic Cement
ASTM C 114 : 2024 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM E 4 : 2021 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM C 114 : 2023 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM C 109/C109M : 2016 : REV A Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
ASTM C 595/C595M : 2024 Standard Specification for Blended Hydraulic Cements
ASTM C 125 : 2021 : REV A Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 595/C595M : 2023 Standard Specification for Blended Hydraulic Cements
ASTM C 204 : 2018 : EDT 1 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
ASTM C 187 : 2016 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
ASTM C 490/C490M : 2021 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
ASTM C 230/C230M : 2023 Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
ASTM C 150/C150M : 2022 Standard Specification for Portland Cement
ASTM C 114 : 2022 Standard Test Methods for Chemical Analysis of Hydraulic Cement
ASTM E 4 : 2024 Standard Practices for Force Calibration and Verification of Testing Machines
ASTM C 219 : 2024 Standard Terminology Relating to Hydraulic and Other Inorganic Cements

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.