ASTM C 1240 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Silica Fume Used in Cementitious Mixtures
Hardcopy , PDF
23-05-2020
English
15-06-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.This specification covers silica fume for use in concrete and other systems containing hydraulic cement.
| Committee |
C 09
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers silica fume for use in concrete and other systems containing hydraulic cement.
1.2In the cases of slurried or densified silica fume, perform the tests on the raw silica fume from which these products have been made.
1.3The units stated in SI are to be regarded as the standard. No other units of measurement are included in this standard.
1.4The following safety hazards caveat pertains only to the test methods portions, Sections 10 – 19, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Read the material safety data sheets for materials used.
1.5The text of this standard references notes and footnotes that provide explanatory information. These notes and footnotes (excluding those in tables) shall not be considered as requirements of this standard.
| ASTM C 1567 : 2013 | Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) |
| ASTM C 125 : 2019 | Standard Terminology Relating to Concrete and Concrete Aggregates |
| ASTM C 1790 : 2015 | Standard Specification for Fly Ash Facing Brick |
| ASTM C 685/C685M : 2017 | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
| ASTM C 1697 : 2018 | Standard Specification for Blended Supplementary Cementitious Materials |
| ASTM C 1670/C1670M : 2018 | Standard Specification for Adhered Manufactured Stone Masonry Veneer Units |
| ASTM C 1141/C1141M : 2015 | Standard Specification for Admixtures for Shotcrete (Withdrawn 2024) |
| ASTM C 1623 : 2017 : REV A | Standard Specification for Manufactured Concrete Masonry Lintels |
| ASTM C 1688/C1688M : 2014 : REV A | Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023) |
| ASTM C 936/C936M : 2018 | Standard Specification for Solid Concrete Interlocking Paving Units |
| ASTM D 5370 : 2014 | Standard Specification for Pozzolanic Blended Materials in Construction Applications (Withdrawn 2020) |
| ASTM C 94/C94M : 2018 | Standard Specification for Ready-Mixed Concrete |
| ASTM C 441/C441M : 2017 | Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction |
| ASTM C 1778 : 2016 | Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete |
| ASTM C 1884 : 2018 | Standard Specification for Concrete Ballast Block |
| ASTM C 90 : 2016 : REV A | Standard Specification for Loadbearing Concrete Masonry Units |
| ASTM C 1837 : 2017 | Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures |
| ASTM C 387/C387M : 2017 | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
| ASTM C 1804 : 2014 : EDT 1 | Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
| ASTM C 1884 : 2019 | Standard Specification for Concrete Ballast Block |
| ASTM C 94/C94M : 2019 : REV A | Standard Specification for Ready-Mixed Concrete |
| ASTM C 1319 : 2017 | Standard Specification for Concrete Grid Paving Units |
| ASTM E 2129 : 2018 | Standard Practice for Data Collection for Sustainability Assessment of Building Products |
| ACI PRC-522:2023 | Pervious Concrete—Report |
| ACI PRC-225:2023 | Guide to the Selection and Use of Hydraulic Cements |
| ASTM C 1437 : 2001 | Standard Test Method for Flow of Hydraulic Cement Mortar |
| ASTM C 1069 : 2009 : R2014 | Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption |
| ASTM C 1005 : 2019 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1437 : 2013 | Standard Test Method for Flow of Hydraulic Cement Mortar |
| ASTM C 1069 : 2009 | Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption |
| ASTM C 1069 : 1986 : R1997 : EDT 1 | Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption |
| ASTM C 1005 : 2000 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1005 : 2017 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1005 : 2010 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1069 : 1986 : R2004 : EDT 1 | Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption |
| ASTM C 1005 : 2018 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1437 : 2007 | Standard Test Method for Flow of Hydraulic Cement Mortar |
| ASTM C 1005 : 2005 | Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements |
| ASTM C 1437 : 2015 | Standard Test Method for Flow of Hydraulic Cement Mortar |
| ASTM C 1437 : 1999 | Standard Test Method for Flow of Hydraulic Cement Mortar |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.