ASTM C 1278/C1278M : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Fiber-Reinforced Gypsum Panel
Hardcopy , PDF
15-05-2024
English
31-05-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 11
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers fiber-reinforced gypsum panels described in 1.1.1 – 1.1.4.
1.1.1Interior Fiber-Reinforced Gypsum Panels
are designed to be used for walls, ceilings, or partitions and affords a suitable surface to receive decoration.
1.1.2Water-Resistant Fiber-Reinforced Gypsum Backing Panels
are designed primarily to be used as a base for the application of ceramic or plastic tile on walls or ceilings. This product is also suitable for decoration.
1.1.3Exterior Fiber-Reinforced Gypsum Soffit Panels
are designed for use on exterior soffits and carport ceilings that are completely protected from contact with liquid water.
1.1.4Water-Resistant Exterior Fiber-Reinforced Gypsum Sheathing Panels
are designed for use as sheathing on buildings.
1.1.5Interior Fiber-Reinforced Gypsum Underlayment Panels
are designed for use as a base for application of finished flooring materials.
1.1.6Fiber-Reinforced Gypsum Board Panels
are designed for use in roofing systems.
1.2Specifications applicable to all fiber-reinforced gypsum panels are located in Sections 1 – 4 and 11 – 13 except as modified by applicable product sections. Specifications applicable to specific panels are located in the following sections:
| Interior Fiber-Reinforced Gypsum Panels | 5 |
| Water-Resistant Fiber-Reinforced Gypsum Backing Panels | 6 |
| Exterior Fiber-Reinforced Gypsum Soffit Panels | 7 |
| Water-Resistant Exterior Fiber-Reinforced Gypsum Sheathing | 8 |
| Interior Fiber-Reinforced Gypsum Underlayment Panels | 9 |
| Fiber-Reinforced Gypsum Roof Board Panels | 10 |
1.3The values stated in either inch-pound units or SI (metric) are to be regarded separately as the standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be used independently of the other. Values from the two systems shall not be combined.
1.4The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes shall not be considered as requirements of the standard.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1516 : 2005 : R2023 | Standard Practice for Application of Direct-Applied Exterior Finish Systems |
| ASTM C 1535 : 2005 : R2023 | Standard Practice for Application of Exterior Insulation and Finish Systems Class PI |
| ASTM C 1288 : 2023 | Standard Specification for Fiber-Cement Interior Substrate Sheets |
| ASTM C 1280 : 2018 : R2023 | Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing |
| ASTM C 1789 : 2024 | Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels |
| ASTM C 1397 : 2013 : R2019 | Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage |
| ASTM F 1482 : 2021 | Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring |
| ASTM C 1881 : 2020 | Standard Guide for Closed-Loop Recycling of Scrap Gypsum Panel Products |
| ASTM C 1264 : 2005 | Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board |
| ASTM C 1264 : 2011 | Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products |
| ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 1264 : 2014 | Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products |
| ASTM D 1037 : 2006 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM E 96/E96M : 2022 : REV A : EDT 1 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM C 1264 : 2005 : R2011 | Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board |
| ASTM D 1037 : 2012 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM E 96/E96M : 2022 : REV A | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM C 22/C22M : 2000 : R2021 | Standard Specification for Gypsum |
| ASTM D 3273 : 2000 : R2005 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 3273 : 2012 : EDT 1 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM D 3273 : 2012 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM E 96/E96M : 2021 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM C 11 : 2023 | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM D 3273 : 1986 : R1991 : EDT 1 | Standard Test Method for Resistance to Growth of Moid on the Surface of Interior Coatings in an Enviormental Chamber |
| ASTM E 96/E96M : 2022 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 96/E96M : 2023 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM E 84 : 2021 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 96/E96M : 2024 | Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
| ASTM E 84 : 2022 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 119 : 2022 | Standard Test Methods for Fire Tests of Building Construction and Materials |
| ASTM C 22/C22M : 2000 : R2015 | Standard Specification for Gypsum |
| ASTM E 84 : 2020 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 3273 : 2021 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM E 84 : 2021 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 1264 : 2014 : REV A | Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products |
| ASTM D 1037 : 1999 | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM E 96/E96M : 2016 | Standard Test Methods for Water Vapor Transmission of Materials |
| ASTM C 11 : 2018 : REV B | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM D 1037 : 2006 : REV A | Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM D 1037 : 1978 | Standard Methods of Evaluating the Properties of Wood-Base Fiber and Particle Panel Materials |
| ASTM C 1264 : 2019 | Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products |
| ASTM D 3273 : 2000 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM E 84 : 2023 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 1264 : 1999 | Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board |
| ASTM E 119 : 2020 | Standard Test Methods for Fire Tests of Building Construction and Materials |
| ASTM E 84 : 2023 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 119 : 2007 | Standard Test Methods for Fire Tests of Building Construction and Materials |
| ASTM D 3273 : 2016 | Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber |
| ASTM C 1264 : 1999 : R2004 | Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Board |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.