ASTM C 1316 : 2008 : R2017
Current
The latest, up-to-date edition.
Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler
Hardcopy , PDF
English
01-01-2017
CONTAINED IN VOL. 12.01, 2017 Defines the nondestructive assay of scrap and waste items for U, Pu, or both, using a [252]Cf shuffler.
Committee |
C 26
|
DocumentType |
Test Method
|
Pages |
17
|
ProductNote |
Reconfirmed 2017
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method covers the nondestructive assay of scrap and waste items for U, Pu, or both, using a 252 Cf shuffler. Shuffler measurements have been applied to a variety of matrix materials in containers of up to several 100 L. Corrections are made for the effects of matrix material. Applications of this test method include measurements for safeguards, accountability, TRU, and U waste segregation, disposal, and process control purposes (1, 2, 3).2
1.1.1This test method uses passive neutron coincidence counting (4) to measure the 240Pu-effective mass. It has been used to assay items with total Pu contents between 0.03 g and 1000 g. It could be used to measure other spontaneously fissioning isotopes such as Cm and Cf. It specifically describes the approach used with shift register electronics; however, it can be adapted to other electronics.
1.1.2This test method uses neutron irradiation with a moveable Cf source and counting of the delayed neutrons from the induced fissions to measure the 235U equivalent fissile mass. It has been used to assay items with 235U contents between 0.1 g and 1000 g. It could be used to assay other fissile and fissionable isotopes.
1.2This test method requires knowledge of the relative isotopic composition (See Test Method C1030) of the special nuclear material to determine the mass of the different elements from the measurable quantities.
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4The techniques described in this test method have been applied to materials other than scrap and waste. These other applications are not addressed in this test method.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 8.
ASTM C 1490 : 2014 | Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel |
ASTM C 1133/C1133M : 2010 : R2018 | Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low-Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning |
ASTM C 1207 : 1997 | Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting |
ASTM C 1215 : 2024 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
ASTM C 1009 : 2013 : REV A | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM C 1207 : 2003 | Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting |
ASTM C 1210 : 2018 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 1128 : 2018 | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1207 : 2010 | Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting |
ASTM C 1009 : 1996 : EDT 1 | Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry (Withdrawn 2005) |
ASTM C 1207 : 2010 : R2018 | Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting |
ASTM C 1210 : 1996 : EDT 1 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry (Withdrawn 2005) |
ANSI N15.36 : 1994 | METHODS OF NUCLEAR MATERIAL CONTROL - MEASUREMENT CONTROL PROGRAM - NONDESTRUCTIVE ASSAY MEASUREMENT CONTROL AND ASSURANCE |
ASTM C 1210 : 2021 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within Nuclear Industry |
ASTM C 1490 : 2001 | Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel |
ASTM C 1128 : 1995 : EDT 1 | Standard Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1068 : 1996 : EDT 1 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1156 : 2003 : R2011 | Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials |
ASTM C 1210 : 2012 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 1128 : 2015 | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1068 : 2003 : R2011 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1210 : 2006 | Standard Guide for Establishing a Measurement System Quality Control Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 1215 : 1992 : R2012 : EDT 1 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
ASTM C 1133 : 1996 | Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning |
ASTM C 1068 : 2015 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1133 : 2003 | Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning |
ASTM C 1068 : 2021 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1215 : 1992 : R1997 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
ASTM C 1030 : 2003 | Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry |
ASTM C 1156 : 2018 | Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials |
ASTM C 1490 : 2004 | Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel |
ASTM C 1128 : 2023 | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1030 : 2010 : R2018 | Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry |
ASTM C 1030 : 2010 | Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry |
ASTM C 1128 : 2001 | Standard Guide for Preparation of Working Reference Materials for Use in the Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1068 : 2003 | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1673 : 2007 : EDT 1 | Standard Terminology of C26.10 Nondestructive Assay Methods |
ASTM C 1673 : 2010 : REV A : R2018 | Standard Terminology of C26.10 Nondestructive Assay Methods |
ASTM C 1490 : 2014 : REDLINE | Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel |
ASTM C 1215 : 2018 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
ASTM C 1592 : 2004 | Standard Guide for Nondestructive Assay Measurements |
ASTM C 1673 : 2010 : REV A | Standard Terminology of C26.10 Nondestructive Assay Methods |
ANSI N15.20 : 1975 | NONDESTRUCTIVE ASSAY SYSTEMS, GUIDE TO CALIBRATING, |
ASTM C 1068 : 2015 : REDLINE | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1156 : 1995 : EDT 1 | Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials |
ASTM C 1673 : 2007 | Standard Terminology of C26.10 Nondestructive Assay Methods |
ASTM C 1215 : 1992 : R2006 | Standard Guide for Preparing and Interpreting Precision and Bias Statements in Test Method Standards Used in the Nuclear Industry |
ASTM C 1673 : 2010 : REV A : EDT 1 | Standard Terminology of C26.10 Nondestructive Assay Methods |
ASTM C 1009 : 2021 | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM C 1490 : 2014 : R2023 | Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel |
ASTM C 1128 : 2001 : R2008 | Standard Guide for Preparation of Working Reference Materials for Use in Analysis of Nuclear Fuel Cycle Materials |
ASTM C 1009 : 2013 | Standard Guide for Establishing and Maintaining a Quality Assurance Program for Analytical Laboratories Within the Nuclear Industry |
ASTM C 1030 : 1995 | Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry |
ASTM C 1490 : 2014 | Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel |
ASTM C 1156 : 2003 | Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials |
ASTM C 1009 : 2006 | Standard Guide for Establishing a Quality Assurance Program for Analytical Chemistry Laboratories Within the Nuclear Industry |
ASTM C 1490 : 2004 : R2010 | Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel |
ASTM C 1673 : 2010 | Standard Terminology of C26.10 Nondestructive Assay Methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.