ASTM C 1349 : 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Architectural Flat Glass Clad Polycarbonate
Available format(s)
Hardcopy , PDF
Superseded date
27-02-2024
Superseded by
Language(s)
English
Published date
05-06-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 14
|
| DocumentType |
Standard
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the quality requirements for cut sizes of glass clad polycarbonate (GCP) for use in buildings as security, detention, hurricane/cyclic wind-resistant, blast and ballistic-resistant glazing applications.
1.2Optical distortion and the evaluation thereof are not currently within the scope of the standard. Mockups are recommended as a method to evaluate glass. (See Appendix X3.)
1.3The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
| ASTM C 1036 : 2001 | Standard Specification for Flat Glass |
| ASTM D 256 : 2010 : R2018 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM F 1233 : 2008 | Standard Test Method for Security Glazing Materials And Systems |
| ASTM D 635 : 2018 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
| ASTM D 1005 : 1995 : R2020 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM C 1376 : 2010 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM F 1642 : 2003 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
| ASTM C 1422 : 1999 : R2005 | Standard Specification for Chemically Strengthened Flat Glass |
| ASTM F 1233 : 1998 | Standard Test Method for Security Glazing Materials And Systems |
| ASTM D 3763 : 2014 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM F 1233 : 2008 : R2013 | Standard Test Method for Security Glazing Materials And Systems |
| ASTM C 1376 : 1997 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass |
| ASTM C 1172 : 2009 : EDT 1 | Standard Specification for Laminated Architectural Flat Glass |
| ASTM C 1048 : 1997 : REV B | Standard Specification for Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass |
| ASTM D 3763 : 2000 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM E 1886 : 2004 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
| ASTM D 1003 : 2007 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM E 1996 : 2012 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM D 3763 : 2010 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM C 1036 : 2021 | Standard Specification for Flat Glass |
| ASTM E 1996 : 2012 : REV A | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM D 1003 : 2013 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM E 1886 : 2013 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
| ASTM C 1036 : 2006 | Standard Specification for Flat Glass |
| ASTM D 256 : 2023 : EDT 1 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM E 1996 : 2002 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes |
| ASTM C 1048 : 2018 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM F 1233 : 2021 | Standard Test Method for Security Glazing Materials And Systems |
| ASTM C 1172 : 2003 | Standard Specification for Laminated Architectural Flat Glass |
| ASTM C 1376 : 2003 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM D 543 : 2021 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| ASTM D 3763 : 2018 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM E 1996 : 2023 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM E 1996 : 2006 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM F 1915 : 2005 | Standard Test Methods for Glazing for Detention Facilities |
| ASTM C 1036 : 2016 | Standard Specification for Flat Glass |
| ASTM D 1005 : 1995 : R2001 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 1003 : 2007 : EDT 1 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM E 1996 : 2005 : REV A | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM E 1996 : 2004 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM C 1503 : 2024 | Standard Specification for Silvered Flat Glass Mirror |
| ASTM E 1886 : 2005 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
| ASTM D 635 : 2022 | Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position |
| ASTM C 1036 : 2011 | Standard Specification for Flat Glass |
| ASTM D 256 : 2023 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM E 1996 : 2008 : EDT 1 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM D 1044 : 2013 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM C 1422 : 1999 : R2005 : EDT 1 | Standard Specification for Chemically Strengthened Flat Glass |
| ASTM D 3763 : 2008 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM E 1996 : 2009 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM E 1996 : 2001 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes |
| ASTM C 1376 : 2021 : REV A | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM D 1044 : 2005 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM C 1048 : 2012 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM D 1003 : 2011 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM C 1172 : 2009 | Standard Specification for Laminated Architectural Flat Glass |
| ASTM D 1005 : 1995 : R2013 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 1044 : 2008 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM D 638 : 2014 | Standard Test Method for Tensile Properties of Plastics |
| ASTM E 1996 : 2014 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM D 3763 : 2010 : EDT 1 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM C 1422 : 1999 | Standard Specification for Chemically Strengthened Flat Glass |
| ASTM E 1996 : 2014 : REV A | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM C 1048 : 2004 | Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass |
| ASTM E 1886 : 2013 : REV A | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
| ASTM D 1003 : 2021 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM F 1642 : 1996 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
| ASTM C 162 : 2005 : R2015 | Standard Terminology of<brk type="line"/> Glass and Glass Products |
| ASTM E 1996 : 2005 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM D 543 : 2020 | Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
| ASTM F 1233 : 2008 : R2019 | Standard Test Method for Security Glazing Materials And Systems |
| ASTM C 1503 : 2001 | Standard Specification for Silvered Flat Glass Mirror |
| ASTM E 1996 : 2017 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM C 1172 : 2014 | Standard Specification for Laminated Architectural Flat Glass |
| ASTM E 308 : 2018 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM E 1996 : 2020 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM F 1642 : 2012 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
| ASTM C 162 : 2023 | Standard Terminology of Glass and Glass Products |
| ASTM F 1915 : 1998 | Standard Test Methods for Glazing for Detention Facilities |
| ASTM D 1044 : 2008 : EDT 1 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM E 1996 : 2008 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM E 1886 : 2019 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
| ASTM D 1003 : 2000 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM D 3763 : 2015 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM C 1376 : 2015 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM C 1376 : 2021 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
| ASTM E 1996 : 2005 : REV B | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
| ASTM E 1996 : 2003 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes |
| ASTM D 3763 : 2002 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM C 1036 : 2011 : EDT 1 | Standard Specification for Flat Glass |
| ASTM C 1503 : 2008 | Standard Specification for Silvered Flat Glass Mirror |
| ASTM D 1005 : 1995 : R2007 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM D 3763 : 2006 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM F 1915 : 2005 : R2019 | Standard Test Methods for Glazing for Detention Facilities |
| ASTM E 308 : 2022 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
| ASTM F 1642 : 2004 : R2010 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
| ASTM D 1003 : 2011 : EDT 1 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM C 1048 : 2012 : EDT 1 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM F 1642 : 2004 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
| ASTM D 1044 : 1999 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion |
| ASTM E 1886 : 2002 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
| ASTM F 1915 : 2005 : R2012 | Standard Test Methods for Glazing for Detention Facilities |
| ASTM E 1886 : 2004 : REV A | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
| ASTM D 3763 : 2023 | Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors |
| ASTM D 1044 : 2019 | Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser |
| ASTM D 1003 : 1992 | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
| ASTM C 1503 : 2018 | Standard Specification for Silvered Flat Glass Mirror |
| ASTM D 1005 : 1995 | Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers |
| ASTM C 1036 : 1991 : R1997 | Standard Specification for Flat Glass |
| ASTM E 1886 : 1997 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
| ASTM F 1915 : 2003 | Standard Test Methods for Glazing for Detention Facilities |
| ASTM C 1172 : 2019 | Standard Specification for Laminated Architectural Flat Glass |
| ASTM C 1172 : 1996 : EDT 1 | Standard Specification for Laminated Architectural Flat Glass |
| ASTM D 638 : 2022 | Standard Test Method for Tensile Properties of Plastics |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.