ASTM C 1355/C1355M : 1996 : R2020
Current
The latest, up-to-date edition.
Standard Specification for Glass Fiber Reinforced Gypsum Composites
Hardcopy , PDF
English
01-06-2020
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 11
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This specification covers glass fiber reinforced gypsum (GRG) composites having minimum properties and quality suitable to allow the production of GRG parts for non-loading bearing, thin section, ornamental shapes for architectural embellishment of interior building construction.
1.2The values stated in either inch-pound units or SI [metric] are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system shall be independent of the other. Values from the two systems shall not be combined.
1.3The text of this standard references footnotes which provide explanatory material. These footnotes shall not be considered as requirements of the standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 256 : 2010 : R2018 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM E 136 : 2024 | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
| ASTM D 696 : 2024 | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and +30°C with a Vitreous Silica Dilatometer |
| ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 2583 : 2013 : REV A | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022) |
| ASTM C 947 : 2003 : R2023 | Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) |
| ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 136 : 2024 : REV B | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
| ASTM C 11 : 2023 | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM C 473 : 2019 | Standard Test Methods for Physical Testing of Gypsum Panel Products |
| ASTM D 696 : 2016 | Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer |
| ASTM D 256 : 2023 : EDT 1 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM C 11 : 2024 | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM E 136 : 2022 | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
| ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 136 : 2019 : REV A | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C |
| ASTM E 84 : 2021 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 84 : 2022 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 473 : 2024 | Standard Test Methods for Physical Testing of Gypsum Panel Products |
| ASTM E 84 : 2024 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 256 : 2023 | Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics |
| ASTM E 84 : 2020 | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM E 84 : 2021 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 11 : 2018 : REV B | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM E 84 : 2023 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM D 2583 : 2024 | Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor |
| ASTM E 136 : 2024 : REV C | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
| ASTM E 84 : 2023 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
| ASTM C 11 : 2024 : REV A | Standard Terminology Relating to Gypsum and Related Building Materials and Systems |
| ASTM C 947 : 2003 : R2016 | Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading) |
| ASTM E 136 : 2024 : REV A | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.