![header thumbnail](/images/publishers\astm_cover.gif)
ASTM C 1361 : 2010 : R2019
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
Hardcopy , PDF
English
01-07-2019
1.1 This practice covers the determination of constantamplitude, axial, tension-tension cyclic fatigue behavior and performance of advanced ceramics at ambient temperatures to establish “baseline” cyclic fatigue performance.
Committee |
C 28
|
DocumentType |
Standard Practice
|
Pages |
9
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This practice covers the determination of constant-amplitude, axial, tension-tension cyclic fatigue behavior and performance of advanced ceramics at ambient temperatures to establish “baseline” cyclic fatigue performance. This practice builds on experience and existing standards in tensile testing advanced ceramics at ambient temperatures and addresses various suggested test specimen geometries, test specimen fabrication methods, testing modes (force, displacement, or strain control), testing rates and frequencies, allowable bending, and procedures for data collection and reporting. This practice does not apply to axial cyclic fatigue tests of components or parts (that is, machine elements with nonuniform or multiaxial stress states).
1.2This practice applies primarily to advanced ceramics that macroscopically exhibit isotropic, homogeneous, continuous behavior. While this practice applies primarily to monolithic advanced ceramics, certain whisker- or particle-reinforced composite ceramics, as well as certain discontinuous fibre-reinforced composite ceramics, may also meet these macroscopic behavior assumptions. Generally, continuous fibre-reinforced ceramic composites (CFCCs) do not macroscopically exhibit isotropic, homogeneous, continuous behavior and application of this practice to these materials is not recommended.
1.3The values stated in SI units are to be regarded as the standard and are in accordance with IEEE/ASTM SI 10.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Refer to Section 7 for specific precautions.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1145 : 2019 | Standard Terminology of Advanced Ceramics |
ASTM E 1823 : 2024 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 83 : 2023 | Standard Practice for Verification and Classification of Extensometer Systems |
ASTM E 1012 : 2014 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM C 1322 : 2005 : REV B | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 1823 : 2024 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM C 1145 : 1998 | Standard Terminology of Advanced Ceramics |
ASTM E 1823 : 2012 : REV : EDT 0 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2007 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM C 1145 : 2006 | Standard Terminology of Advanced Ceramics |
ASTM E 83 : 2000 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
ASTM E 468 : 1990 : R2004 | Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
ASTM E 83 : 2016 | Standard Practice for Verification and Classification of Extensometer Systems |
ASTM C 1273 : 2018 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
ASTM E 1823 : 2009 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 83 : 1998 : EDT 1 | Standard Practice for Verification and Classification of Extensometer |
ASTM C 1322 : 2015 | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM C 1322 : 2005 : REV A | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 337 : 2015 : R2023 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
ASTM C 1145 : 2005 | Standard Terminology of Advanced Ceramics |
ASTM C 1273 : 1995 : REV A : R2000 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
ASTM E 337 : 2015 | Standard Test Method for Measuring Humidity with a Psychrometer (the Measurement of Wet- and Dry-Bulb Temperatures) |
ASTM E 6 : 2002 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 1012 : 1999 | Standard Practice for Verification of Specimen Alignment Under Tensile Loading |
ASTM E 1012 : 2012 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM C 1322 : 2005 : REV B : EDT 1 | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 1012 : 2014 : EDT 1 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM C 1145 : 2003 | Standard Terminology of Advanced Ceramics |
ASTM C 1273 : 2015 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
ASTM E 739 : 2023 | Standard Guide for Statistical Analysis of Linear or Linearized Stress-Life (<emph type="bdit">S-N</emph>) and Strain-Life (ε-<emph type="bdit" >N</emph>) Fatigue Data (Withdrawn 2024) |
ASTM E 1823 : 2005 : REV A : EDT 1 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2010 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2021 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM C 1322 : 2005 : REV B : R2010 | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM C 1322 : 1996 : REV A | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 1823 : 2009 : REV B | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2012 : REV D | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2012 : REV B | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1012 : 2012 : EDT 1 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM C 1322 : 2002 | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 6 : 2015 : EDT 3 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 739 : 2010 : R2015 | Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (<emph type="bdit">S-N</emph>) and Strain-Life (ε-<emph type="bdit" >N</emph>) Fatigue Data |
ASTM E 6 : 2023 : REV A | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 1012 : 2005 | Standard Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM C 1145 : 2006 : R2013 | Standard Terminology of Advanced Ceramics |
ASTM C 1322 : 2002 : REV A | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 4 : 2021 | Standard Practices for Force Calibration and Verification of Testing Machines |
ASTM E 1823 : 1996 : R2002 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 1996 : EDT 1 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM C 1145 : 2002 | Standard Terminology of Advanced Ceramics |
ASTM E 467 : 2008 : R2014 | Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
ASTM E 1823 : 2012 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2007 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM C 1322 : 2015 : R2019 | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 6 : 2015 : EDT 4 : REDLINE | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 468 : 2018 | Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials |
ASTM C 1273 : 2005 : R2010 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
ASTM C 1145 : 2002 : REV A | Standard Terminology of Advanced Ceramics |
ASTM C 1322 : 2005 | Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics |
ASTM E 1823 : 2023 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 6 : 2015 : EDT 4 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM E 6 : 2023 | Standard Terminology Relating to Methods of Mechanical Testing |
ASTM C 1145 : 2001 | Standard Terminology of Advanced Ceramics |
ASTM E 467 : 2021 | Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System |
ASTM E 1823 : 2013 | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM C 1145 : 2006 : R2013 : EDT 1 | Standard Terminology of Advanced Ceramics |
ASTM E 1823 : 2012 : REV C | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1823 : 2020 : REV B | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM E 1012 : 2019 | Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application |
ASTM E 1823 : 2005 : REV A | Standard Terminology Relating to Fatigue and Fracture Testing |
ASTM C 1273 : 2005 | Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures |
ASTM E 1823 : 2011 | Standard Terminology Relating to Fatigue and Fracture Testing |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.