ASTM C 1371 : 2015 : R2022
Current
The latest, up-to-date edition.
Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
Hardcopy , PDF
English
28-06-2022
Committee |
C 16
|
DocumentType |
Test Method
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method covers a technique for determination of the emittance of opaque and highly thermally conductive materials using a portable differential thermopile emissometer. The purpose of the test method is to provide a comparative means of quantifying the emittance of materials near room temperature.
1.2This test method does not supplant Test Method C835, which is an absolute method for determination of total hemispherical emittance, or Test Method E408, which includes two comparative methods for determination of total normal emittance. Because of the unique construction of the portable emissometer, it can be calibrated to measure the total hemispherical emittance. This is supported by comparison of emissometer measurements with those of Test Method C835 (1).2
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 2813 : 2018 | Standard Practice for Building Enclosure Commissioning |
ASTM C 1729M : 2021 | Standard Specification for Aluminum Jacketing for Insulation |
ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
ASTM C 1767M : 2021 | Standard Specification for Stainless Steel Jacketing for Insulation |
ASTM C 1483/C1483M : 2017 | Standard Specification for Exterior Solar Radiation Control Coatings on Buildings |
ASTM E 1591 : 2020 | Standard Guide for Obtaining Data for Fire Growth Models |
ASTM C 1423 : 2021 | Standard Guide for Selecting Jacketing Materials for Thermal Insulation |
ASTM C 1767 : 2021 | Standard Specification for Stainless Steel Jacketing for Insulation |
ASTM D 7897 : 2018 | Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance |
ASTM C 667 : 2017 | Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air |
ASTM C 1729 : 2021 | Standard Specification for Aluminum Jacketing for Insulation |
ASTM C 1775 : 2022 | Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications |
ASTM C 1321 : 2015 : R2020 | Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction |
ASTM C 1668 : 2020 | Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems |
ASTM C 1916 : 2021 | Standard Specification for Flexible Protective Jackets Made of Modified Asphalt/Butyl Rubber for Use over Thermal Insulation |
ASTM C 1313/C1313M : 2013 : R2019 | Standard Specification for Sheet Radiant Barriers for Building Construction Applications |
ASTM C 1224 : 2015 : R2020 | Standard Specification for Reflective Insulation for Building Applications |
ASTM C 1363 : 2019 | Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus |
ASTM C 680 : 2023 : REV A | Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs |
ASTM C 680 : 2019 | Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs |
ASTM C 168 : 2024 | Standard Terminology Relating to Thermal Insulation |
ASTM E 691 : 2023 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM E 691 : 2022 | Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method |
ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
ASTM C 680 : 2023 | Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.