ASTM C 1376 : 2015
Current
The latest, up-to-date edition.
Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
Hardcopy , PDF
English
10-11-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.This specification covers the optical and aesthetic quality requirements for coatings applied to glass for use in building glazing.
| Committee |
C 14
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
1.1This specification covers the optical and aesthetic quality requirements for coatings applied to glass for use in building glazing.
1.2The coatings covered are applied to the glass using either pyrolytic or vacuum (sputtering) deposition methods and are typically applied to control solar heat gain, energy performance, comfort level, and condensation and enhance the aesthetic of the building.
1.3This specification addresses blemishes related to the coating only. It does not address glass blemishes, applied ceramic frits, and organic films.
1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
| ASTM E 998 : 2019 | Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads |
| ASTM C 1172 : 2019 | Standard Specification for Laminated Architectural Flat Glass |
| ASTM C 1048 : 2018 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM C 1464 : 2016 | Standard Specification for Bent Glass |
| ASTM C 1349 : 2017 | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
| ASTM C 1036 : 2001 | Standard Specification for Flat Glass |
| ASTM C 1048 : 1997 : REV B | Standard Specification for Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass |
| ASTM D 2244 : 2015 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2011 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM C 1036 : 2006 | Standard Specification for Flat Glass |
| ASTM D 2244 : 2009 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM C 1048 : 2018 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM D 2244 : 2002 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2016 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2015 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2009 : REV B | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2002 : EDT 1 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM C 1036 : 2016 | Standard Specification for Flat Glass |
| ASTM D 2244 : 2015 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM C 1036 : 2011 | Standard Specification for Flat Glass |
| ASTM D 2244 : 2014 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM D 2244 : 2005 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM C 1048 : 2012 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM C 1048 : 2004 | Standard Specification for Heat-Treated Flat Glass—Kind HS, Kind FT Coated and Uncoated Glass |
| ASTM D 2244 : 2007 | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM C 1036 : 2011 : EDT 1 | Standard Specification for Flat Glass |
| ASTM D 2244 : 2009 : REV A | Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates |
| ASTM C 1048 : 2012 : EDT 1 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
| ASTM D 2244 : 1993 : R2000 | Standard Test Method for Calculation of Color Differences From Instrumentally Measured Color Coordinates |
| ASTM C 1036 : 1991 : R1997 | Standard Specification for Flat Glass |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.