ASTM C 1442 : 2014 : REDLINE
Current
The latest, up-to-date edition.
Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
English
15-07-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 04.07, 2014 Defines three types of laboratory weathering exposure procedures for evaluating the effect of actinic radiation, heat, and moisture on sealants.
| Committee |
C 24
|
| DocumentType |
Redline
|
| Pages |
7
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1This practice covers three types of laboratory weathering exposure procedures for evaluating the effect of actinic radiation, heat, and moisture on sealants.
1.2The exposure sources used in the three types of artificial weathering devices are the filtered xenon arc, fluorescent ultraviolet lamps, and open flame carbon arc based on Practices G155, G154, and G152, respectively.
1.3The values stated in SI units are to be regarded as the standard. The values given in parentheses are provided for information only.
1.4The ISO standard related to this Practice is ISO 11431. Significant differences exist between the procedures. The ISO specimens are exposed through glass and are elongated prior to examination for loss of adhesion or cohesion, or both, following exposure.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM C 510 : 2016 : REDLINE | Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants |
| ASTM C 1021 : 2008 | Standard Practice for Laboratories Engaged in Testing of Building Sealants |
| ASTM C 1021 : 2008 : R2014 | Standard Practice for Laboratories Engaged in Testing of Building Sealants |
| ASTM C 1519 : 2010 | Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
| ASTM C 1523 : 2017 : REDLINE | Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants |
| ASTM C 1518 : 2016 : REDLINE | Standard Specification for Precured Elastomeric Silicone Joint Sealants |
| ASTM C 1248 : 2008 : R2012 | Standard Test Method for Staining of Porous Substrate by Joint Sealants |
| ASTM C 1311 : 2014 : REDLINE | Standard Specification for Solvent Release Sealants |
| ASTM C 1248 : 2008 | Standard Test Method for Staining of Porous Substrate by Joint Sealants |
| ASTM C 793 : 2005 | Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants |
| ASTM C 1257 : 2015 : REDLINE | Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants |
| ASTM C 793 : 2005 : R2010 | Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants |
| ASTM C 734 : 2015 : REDLINE | Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering |
| ASTM C 793 : 2005 : R2017 | Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants |
| ASTM C 1519 : 2010 : R2017 | Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures |
| ASTM C 1193 : 2016 : REDLINE | Standard Guide for Use of Joint Sealants |
| ASTM C 732 : 2017 : REDLINE | Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants |
| ASTM C 920 : 2018 : REDLINE | Standard Specification for Elastomeric Joint Sealants |
| ASTM E 2785 : 2014 : REDLINE | Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions |
| ASTM D 5893 : 2004 | Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements |
| ASTM C 957/C957M : 2017 : REDLINE | Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface |
| ASTM C 1382 : 2016 : REDLINE | Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| ASTM G 152 : 2013 : REDLINE | Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials |
| ISO 11431:2002 | Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass |
| ASTM G 155 : 2013 : REDLINE | Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials |
| ASTM G 113 : 2016 : REDLINE | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
| ASTM G 147 : 2017 : REDLINE | Standard Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.