ASTM C 165 : 2023
|
Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
ASTM E 662 : 2021
|
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
ASTM E 1354 : 2010
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 585 : 2022
|
Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing |
ASTM C 168 : 2019
|
Standard Terminology Relating to Thermal Insulation |
ASTM C 1045 : 2019
|
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM C 1559 : 2015 : R2021
|
Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type) |
ASTM E 1354 : 2002
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 177 : 2019
|
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
ASTM C 1114 : 2006 : R2013
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM C 1114 : 2006 : R2019
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM E 1354 : 2014 : EDT 1
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 2126 : 1999
|
Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging |
ASTM C 1045 : 2007 : R2013
|
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM D 2126 : 2004
|
Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging |
ASTM C 1559 : 2003
|
Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type) |
ASTM C 1304 : 2008
|
Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
ASTM D 3675 : 2022
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM E 2231 : 2002 : EDT 1
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM E 96/E96M : 2022 : REV A : EDT 1
|
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM D 3675 : 2005
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM C 634 : 2013 : EDT 1
|
Standard Terminology Relating to Building and Environmental Acoustics |
ASTM E 96/E96M : 2022 : REV A
|
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM C 634 : 2022
|
Standard Terminology Relating to Building and Environmental Acoustics |
ASTM D 3675 : 2009 : REV A
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM E 1354 : 2004 : REV A
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 1304 : 2008 : R2013
|
Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
ASTM E 1354 : 1999
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 96/E96M : 2021
|
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM C 302 : 1995
|
Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
ASTM C 1559 : 2015
|
Standard Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type) |
ASTM C 1304 : 2018
|
Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
ASTM D 3675 : 2009
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM E 1354 : 2010 : REV A
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 795 : 2016
|
Standard Practices for Mounting Test Specimens During Sound Absorption Tests |
ASTM C 1058 : 1997
|
Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
ASTM E 662 : 2021 : REV A
|
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
ASTM C 1338 : 2000
|
Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
ASTM C 447 : 2015
|
Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations |
ASTM E 1354 : 2003
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 1058 : 2003
|
Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
ASTM C 423 : 2017
|
Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
ASTM D 2126 : 2015
|
Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging |
ASTM D 3675 : 2021
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM E 96/E96M : 2022
|
Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials |
ASTM D 3675 : 2014
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM E 1354 : 2002 : REV D : EDT 1
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 2231 : 2014
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM C 447 : 2015 : R2022
|
Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations |
ASTM E 176 : 2021 : REV A : EDT 1
|
Standard Terminology of Fire Standards |
ASTM E 84 : 2023
|
Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 634 : 2013 : R2021
|
Standard Terminology Relating to Building and Environmental Acoustics |
ASTM D 3574 : 2011
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM E 1354 : 2008 : REV A
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 423 : 2022
|
Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
ASTM E 176 : 2018 : REV A : EDT 1
|
Standard Terminology of Fire Standards |
ASTM E 1354 : 2002 : REV D
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 543 : 2021
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
ASTM E 2231 : 2019
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM E 662 : 2019
|
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
ASTM C 1114 : 2006
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM C 1045 : 2001
|
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM C 1338 : 2014
|
Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
ASTM E 84 : 2021
|
Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 518 : 2002
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM C 1559 : 2004
|
Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type) |
ASTM E 2231 : 2021
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM E 84 : 2022
|
Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM E 2231 : 2007 : REV A
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM E 1354 : 2009
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 2231 : 2002
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM C 1338 : 2019
|
Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
ASTM C 1338 : 2008
|
Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
ASTM D 3574 : 2008
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM C 1304 : 1995
|
Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials |
ASTM C 302 : 2013 : R2017
|
Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
ASTM E 1354 : 2022
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 3574 : 2017
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM C 1338 : 2019 : R2022
|
Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings |
ASTM E 84 : 2020
|
Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM E 1354 : 2015
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 84 : 2021 : REV A
|
Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 165 : 2007 : R2017
|
Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
ASTM E 1354 : 2016 : REV A
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 2231 : 2009
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM C 1114 : 2000
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM D 3675 : 2001
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source |
ASTM D 3675 : 2008
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM E 2231 : 2007
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM E 176 : 2021
|
Standard Terminology of Fire Standards |
ASTM D 3574 : 1995
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM E 96/E96M : 2016
|
Standard Test Methods for Water Vapor Transmission of Materials |
ASTM D 3675 : 2019
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM D 3574 : 1977 : EDT 2
|
Standard Methods of Testing Flexible Cellular Materials-Slab, Bonded, And Molded Urethane Foams |
ASTM D 638 : 2014
|
Standard Test Method for Tensile Properties of Plastics |
ASTM E 2231 : 2018
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM E 1354 : 2022 : REV C
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 3675 : 2016
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM E 176 : 2018 : REV A : EDT 2
|
Standard Terminology of Fire Standards |
ASTM E 1354 : 2016
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 518 : 2017
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM D 543 : 2020
|
Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents |
ASTM E 1354 : 2017
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 1354 : 2002 : REV A
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 518 : 2021
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM D 3675 : 2021 : REV A
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM D 3574 : 2003
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM E 1354 : 2015 : REV A
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 1114 : 2000 : R2006
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM D 3574 : 2016
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM D 2126 : 2009
|
Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging |
ASTM C 1045 : 1997
|
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM C 585 : 2010 : R2016
|
Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing |
ASTM E 1354 : 2011
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 177 : 2019 : EDT 1
|
Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
ASTM E 1354 : 2011 : REV B
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 1354 : 2022 : REV A
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 795 : 2023
|
Standard Practices for Mounting Test Specimens During Sound Absorption Tests |
ASTM E 1354 : 2011 : REV A
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 3675 : 2017
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM D 3574 : 2001
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM C 168 : 2022
|
Standard Terminology Relating to Thermal Insulation |
ASTM C 302 : 2013 : R2022
|
Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
ASTM D 3675 : 2011
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM D 3675 : 2012
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source |
ASTM E 662 : 2021 : REV A : EDT 1
|
Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials |
ASTM C 1058 : 2003 : R2008
|
Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
ASTM D 3675 : 1998
|
Standard Test Method for Surface Flammability of Flexible Cellular Materials Using A Radiant Heat Energy Source |
ASTM C 1559 : 2004 : R2009
|
Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type) |
ASTM E 2231 : 2015
|
Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics |
ASTM E 176 : 2021 : REV A
|
Standard Terminology of Fire Standards |
ASTM E 1354 : 2022 : REV B
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM C 1045 : 2007
|
Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM E 1354 : 2004
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 1354 : 2013
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM E 1354 : 2014
|
Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter |
ASTM D 3574 : 2005
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM D 3574 : 2001 : EDT 1
|
Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams |
ASTM D 638 : 2022
|
Standard Test Method for Tensile Properties of Plastics |
ASTM C 518 : 1998
|
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |