ASTM C 1564 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
Hardcopy , PDF
11-09-2020
English
01-12-2015
Committee |
C 24
|
DocumentType |
Guide
|
Pages |
8
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This guide covers the use of silicone sealants in protective glazing systems for building construction. Protective glazing includes systems designed for use in applications subject to natural disasters such as hurricanes, earthquakes, windstorms and forms of forced entry such as blasts, burglary, and ballistic attack.
1.2While other glazing accessories and components are used in protective glazing, this document specifically describes the use of silicone sealants for protective glazing systems.
1.3This guide provides information useful to design professionals, architects, manufacturers, installers, and others for the design and installation of silicone sealants for protective glazing systems.
1.4A silicone sealant is only one component of a glazing system. A glazing system that meets the testing and code requirement for impact glazing must successfully integrate the frame and its anchorage, glass, or other glazing materials, protective film or interlayer and silicone sealant into a high performance system. Compliance with code or other requirements can be determined through physical testing of the glazing system or through computer simulation.
1.5Glazing systems using silicone sealants that have successfully met the test requirements for missile impact and bomb blast test requirements incorporate the use of silicone sealants specifically formulated, tested, and marketed for this application. Sealants that are commonly used today comply with Specifications C920 and C1184.
1.6This guide does not discuss sealants intended to protect against radioactivity or provide biological containment.
1.7The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations.
1.8This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.
ASTM F 2248 : 2019 | Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass |
ASTM C 1472 : 2016 : EDT 1 | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
ASTM C 1472 : 2016 | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
ASTM C 1193 : 2011 : REV A | Standard Guide for Use of Joint Sealants |
ASTM C 1401 : 1998 | Standard Guide for Structural Sealant Glazing |
ASTM F 1642 : 2003 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
ASTM C 1184 : 2000 : REV A | Standard Specification for Structural Silicone Sealants |
ASTM C 1401 : 2009 | Standard Guide for Structural Sealant Glazing |
ASTM C 1472 : 2005 | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
ASTM E 1886 : 2004 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
ASTM C 1401 : 2009 : REV A | Standard Guide for Structural Sealant Glazing |
ASTM C 1193 : 2016 | Standard Guide for Use of Joint Sealants |
ASTM C 1184 : 2018 : EDT 1 | Standard Specification for Structural Silicone Sealants |
ASTM C 1394 : 2003 | Standard Guide for In-Situ Structural Silicone Glazing Evaluation |
ASTM C 1472 : 2010 | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
ASTM E 1886 : 2013 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
ASTM C 1394 : 2003 : R2008 | Standard Guide for In-Situ Structural Silicone Glazing Evaluation |
ASTM C 1135 : 2000 : R2011 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 1472 : 2006 | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
ASTM C 1193 : 2005 : REV A | Standard Guide for Use of Joint Sealants |
ASTM C 1472 : 2016 | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
ASTM C 1184 : 2018 | Standard Specification for Structural Silicone Sealants |
ASTM C 1087 : 2000 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM C 1135 : 2019 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM E 1886 : 2005 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
ASTM C 1193 : 2012 | Standard Guide for Use of Joint Sealants |
ASTM C 1184 : 2000 : REV A : EDT 1 | Standard Specification for Structural Silicone Sealants |
ASTM C 1135 : 2000 : R2005 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 1193 : 2005 | Standard Guide for Use of Joint Sealants |
ASTM C 1394 : 2003 : R2012 | Standard Guide for In-Situ Structural Silicone Glazing Evaluation |
ASTM C 1135 : 2000 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM C 1135 : 2015 | Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants |
ASTM E 1886 : 2013 : REV A | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
ASTM C 1087 : 2016 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM F 1642 : 1996 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
ASTM C 1394 : 1998 | Standard Guide for In-Situ Structural Silicone Glazing Evaluation |
ASTM C 1193 : 2000 | Standard Guide for Use of Joint Sealants |
ASTM C 1087 : 2000 : R2011 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM F 1642 : 2012 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
ASTM E 1886 : 2019 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
ASTM C 1472 : 2016 : EDT 1 | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
ASTM C 1401 : 2002 | Standard Guide for Structural Sealant Glazing |
ASTM C 1401 : 2007 | Standard Guide for Structural Sealant Glazing |
ASTM C 1193 : 2011 | Standard Guide for Use of Joint Sealants |
ASTM F 1642 : 2004 : R2010 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
ASTM C 1184 : 2005 | Standard Specification for Structural Silicone Sealants |
ASTM F 1642 : 2004 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
ASTM C 1087 : 2000 : R2006 : EDT 1 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM E 1886 : 2002 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
ASTM E 1886 : 2004 : REV A | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
ASTM C 1087 : 2000 : R2006 | Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems |
ASTM C 1472 : 2000 | Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width |
ASTM C 1193 : 2013 | Standard Guide for Use of Joint Sealants |
ASTM C 1184 : 2013 | Standard Specification for Structural Silicone Sealants |
ASTM C 1184 : 2014 | Standard Specification for Structural Silicone Sealants |
ASTM E 1886 : 1997 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
ASTM C 1193 : 2009 | Standard Guide for Use of Joint Sealants |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.