ASTM C 1587/C1587M : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
Hardcopy , PDF
25-02-2021
English
20-07-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 15
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1The purpose of this practice is to standardize the preparation of manufactured masonry units and masonry specimens extracted from the field for compressive and flexural bond strength testing in a laboratory environment.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The inch-pound units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
| ASTM C 1232 : 2009 : REV B | Standard Terminology of Masonry |
| ASTM C 1314 : 2011 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1180 : 2010 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1314 : 2016 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1072 : 2019 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1180 : 2003 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2015 : REV A | Standard Terminology of Masonry |
| ASTM C 1314 : 2002 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1314 : 2009 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2017 | Standard Terminology for Masonry |
| ASTM C 1180 : 2002 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1072 : 2012 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1232 : 2020 | Standard Terminology for Masonry |
| ASTM C 1232 : 2005 | Standard Terminology of Masonry |
| ASTM C 1072 : 2010 | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1180 : 2018 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2015 | Standard Terminology of Masonry |
| ASTM C 1232 : 2008 | Standard Terminology of Masonry |
| ASTM C 1180 : 2003 : REV A : EDT 1 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1072 : 2000 : REV A | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1314 : 2012 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1180 : 2003 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2010 : REV C | Standard Terminology of Masonry |
| ASTM C 1314 : 2003 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1314 : 2018 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1314 : 2007 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1314 : 2001 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2001 | Standard Terminology of Masonry |
| ASTM C 1232 : 2010 | Standard Terminology of Masonry |
| ASTM C 1072 : 2005 : REV A | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1314 : 2011 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2009 | Standard Terminology of Masonry |
| ASTM C 1072 : 2011 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1180 : 2007 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1232 : 2010 : REV B | Standard Terminology of Masonry |
| ASTM C 1072 : 2005 | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1072 : 2005 : REV B | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1314 : 2014 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2002 | Standard Terminology of Masonry |
| ASTM C 1072 : 2013 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1232 : 2000 | Standard Terminology of Masonry |
| ASTM C 1072 : 2006 | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1314 : 2000 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2009 : REV A | Standard Terminology of Masonry |
| ASTM C 1232 : 2012 | Standard Terminology of Masonry |
| ASTM C 1072 : 2013 : EDT 1 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1180 : 2019 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1314 : 2010 | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1232 : 2010 : REV A | Standard Terminology of Masonry |
| ASTM C 1314 : 2003 : REV B | Standard Test Method for Compressive Strength of Masonry Prisms |
| ASTM C 1180 : 2000 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1314 : 2002 : REV A | Standard Test Method for Compressive Strength of Masonry Prisms |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.