ASTM C 1620 : 2016 : R2023
Current
The latest, up-to-date edition.
Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
Hardcopy , PDF
English
19-01-2023
Committee |
C 24
|
DocumentType |
Standard
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers the types, grades, and physical properties of aerosol polyurethane and aerosol latex foams extruded from pressurized containers and intended for building envelope air barrier sealant applications in building construction.
1.2For specific aerosol foam sealant applications, operational temperature limit criteria shall be as agreed upon between the aerosol sealant manufacturer and the purchaser.
1.3The values in SI units are to be regarded as standard. The values shown in parentheses are for information and approximation only.
1.4The committee with jurisdiction over this standard is not aware of any comparable standards published by other organizations.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1737 : 2022 | Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing |
ASTM C 1643 : 2014 : R2020 | Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants |
ASTM C 1536 : 2019 | Standard Test Method for Measuring the Yield for Aerosol Foam Sealants |
ASTM C 1806 : 2021 | Standard Test Method for Measuring the Flow Rate of Aerosol Foam Sealants |
ASTM C 1852 : 2020 | Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives |
ASTM C 1642 : 2020 | Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials |
ASTM C 919 : 2022 | Standard Practice for Use of Sealants in Acoustical Applications |
ASTM D 883 : 2023 | Standard Terminology Relating to Plastics |
ASTM E 84 : 2023 : REV D | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 883 : 2024 : REV A | Standard Terminology Relating to Plastics |
ASTM E 84 : 2023 : REV C | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM D 883 : 2024 | Standard Terminology Relating to Plastics |
ASTM E 814 : 2013 : REV A : R2017 | Standard Test Method for Fire Tests of Penetration Firestop Systems |
ASTM C 717 : 2019 | Standard Terminology of Building Seals and Sealants |
ASTM D 883 : 2022 | Standard Terminology Relating to Plastics |
ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 390 : 2008 : R2024 | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots |
ASTM E 814 : 2023 : REV A | Standard Test Method for Fire Tests of Penetration Firestop Systems |
ASTM C 390 : 2008 : R2019 | Standard Practice for Sampling and Acceptance of Thermal Insulation Lots |
ASTM C 168 : 2024 | Standard Terminology Relating to Thermal Insulation |
ASTM E 84 : 2024 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM E 814 : 2024 | Standard Test Method for Fire Tests of Penetration Firestop Systems |
ASTM E 814 : 2023 | Standard Test Method for Fire Tests of Penetration Firestop Systems |
ASTM C 1737 : 2022 | Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing |
ASTM C 1737 : 2024 | Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing |
ASTM E 84 : 2023 : REV B | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 1737 : 2023 | Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing |
ASTM C 717 : 2024 | Standard Terminology of Building Seals and Sealants |
ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
ASTM E 84 : 2023 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.