ASTM C 169 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
English
01-06-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.02, 2017 Defines the quantitative chemical analysis of soda-lime and borosilicate glass compositions for both referee and routine analysis.
| Committee |
C 14
|
| DocumentType |
Redline
|
| Pages |
24
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
1.1These test methods cover the quantitative chemical analysis of soda-lime and borosilicate glass compositions for both referee and routine analysis. This would be for the usual constituents present in glasses of the following types: (1) soda-lime silicate glass, (2) soda-lime fluoride opal glass, and (3) borosilicate glass. The following common oxides, when present in concentrations greater than indicated, are known to interfere with some of the determinations in this method: 2 % barium oxide (BaO), 0.2 % phosphorous pentoxide (P2O5), 0.05 % zinc oxide (ZnO), 0.05 % antimony oxide (Sb2O3), 0.05 % lead oxide (PbO).
1.2The analytical procedures, divided into two general groups, those for referee analysis, and those for routine analysis, appear in the following order:
| Sections | ||
| Procedures for Referee Analysis: | ||
| Silica | 10 | |
| BaO, R2O2 (Al2O3 + P2O5), CaO, and MgO | 11 – 15 | |
| Fe2O3, TiO2, ZrO2 by Photometry and Al2O3 by Com- | 16 – 22 | |
| Cr2O3 by Volumetric and Photometric Methods | 23 – 25 | |
| MnO by the Periodate Oxidation Method | 26 – 29 | |
| Na2O by the Zinc Uranyl Acetate Method and K2O by | 30 – 33 | |
| SO3 (Total Sulfur) | 34 – 35 | |
| As2O3 by Volumetric Method | 36 – 40 | |
| Procedures for Routine Analysis: | ||
| Silica by the Single Dehydration Method | 42 – 44 | |
| Al2O3, CaO, and MgO by Complexiometric Titration, | 45 – 51 | |
| BaO, Al2O3, CaO, and MgO by Atomic Absorption; and | 52 – 59 | |
| SO3 (Total Sulfur) | 60 | |
| B2O3 | 61 – 62 | |
| Fluorine by Pyrohydrolysis Separation and Specific Ion | 63 – 66 | |
| P2O5 by the Molybdo-Vanadate Method | 67 – 70 | |
| Colorimetric Determination of Ferrous Iron Using 1,10 | 71 – 76 | |
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| MIL-S-14374 Revision C:1983 | SILICA GEL, IRON FREE |
| ASTM F 1538 : 2003 | Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation |
| CSA A438 : 0 | CONCRETE CONSTRUCTION FOR HOUSING AND SMALL BUILDINGS |
| ASTM F 1538 : 2003 : R2009 | Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation |
| ASTM E 688 : 1994 : R1999 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
| ASTM E 708 : 1979 : R1999 | Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers |
| BS EN 62321-5:2014 | Determination of certain substances in electrotechnical products Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| ASTM E 688 : 1994 : R2011 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019) |
| MIL-PRF-22344 Revision E:2004 | INSULATION, PIPE, THERMAL |
| MIL-PRF-9954 Revision D:2009 | GLASS BEADS: FOR CLEANING AND PEENING |
| ASTM C 1285 : 2014 : REDLINE | Standard Test Methods for Determining Chemical Durability of Nuclear, Hazardous, and Mixed Waste Glasses and Multiphase Glass Ceramics: The Product Consistency Test (PCT) |
| ASTM E 708 : 1979 : R2011 | Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers |
| ASTM F 561 : 2013 | Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids |
| ASTM E 688 : 1994 : R2006 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
| ASTM E 708 : 1979 : R2017 | Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers |
| SAE AMS2431D | Peening Media General Requirements |
| ASTM C 146 : 1994 : REV A : R1999 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM C 430 : 2017 : REDLINE | Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve |
| ASTM C 1571 : 2003 : R2012 | Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment (Withdrawn 2018) |
| ASTM C 1571 : 2003 | Standard Guide for Characterization of Radioactive and/or Hazardous Wastes for Thermal Treatment |
| MIL-S-17726 Revision C:1980 | SAND SANDBLAST |
| ASTM E 708 : 1979 : R2006 | Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers |
| ASTM C 146 : 1994 : REV A : R2014 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM C 146 : 1994 : REV A : R2009 | Standard Test Methods for Chemical Analysis of Glass Sand |
| I.S. EN 62321-5:2014 | DETERMINATION OF CERTAIN SUBSTANCES IN ELECTROTECHNICAL PRODUCTS - PART 5: CADMIUM, LEAD AND CHROMIUM IN POLYMERS AND ELECTRONICS AND CADMIUM AND LEAD IN METALS BY AAS, AFS, ICP-OES AND ICP-MS |
| ASTM C 1412 : 1999 | Standard Practice for Microwave Oven Dissolution of Glass Containing Radioactive and Mixed Wastes (Withdrawn 2001) |
| ASTM C 146 : 1994 : REV A : R2004 | Standard Test Methods for Chemical Analysis of Glass Sand |
| ASTM F 1538 : 2003 : R2017 | Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation |
| ASTM F 1538 : 2003 : EDT 1 | Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation |
| EN 62321-5:2014 | Determination of certain substances in electrotechnical products - Part 5: Cadmium, lead and chromium in polymers and electronics and cadmium and lead in metals by AAS, AFS, ICP-OES and ICP-MS |
| ASTM E 50 : 2017 : REDLINE | Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials |
| ASTM C 146 : 1994 : REV A : R2004 | Standard Test Methods for Chemical Analysis of Glass Sand |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.