• There are no items in your cart

ASTM C 1817 : 2016

Current

Current

The latest, up-to-date edition.

Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O2) Pellets by Gravimetry

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

15-01-2016

€56.53
Excluding VAT

Committee
C 26
DocumentType
Test Method
Pages
6
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This practice is an alternative method to Test Method C698 for the determination of the oxygen-to-metal atom ratio (O/M) in sintered mixed oxide fuel (MOX) pellets. The method presented in Test Method C698 is a one-step thermogravimetric method for determining O/M ratio in sintered MOX powders and pellets. As stated in Test Method C698, thermogravimetric methods using a two-step heating cycle are also satisfactory (1, 2).2 The method presented in this test method is a two-step heating cycle method. This test method is applicable to sintered MOX pellets containing up to 10 weight percent PuO2.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM C 698 : 2016 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O<inf>2</inf>)

ASTM C 833 : 2017 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors
ASTM C 859 : 2023 Standard Terminology Relating to Nuclear Materials
ASTM D 1356 : 2015 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM C 859 : 2014 : REV B Standard Terminology Relating to Nuclear Materials
ASTM C 757 : 1990 : R1996 : EDT 1 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable
ASTM C 859 : 2024 Standard Terminology Relating to Nuclear Materials
ASTM C 833 : 2023 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM C 1672 : 2017 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM D 1356 : 2017 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM C 757 : 2016 : EDT 1 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder for Light Water Reactors
ASTM C 1068 : 1996 : EDT 1 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C 1672 : 2023 Standard Test Method for Determination of the Uranium, Plutonium or Americium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM D 1356 : 2015 : REV B Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM C 1068 : 2003 : R2011 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM C 1068 : 2015 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D 1356 : 2014 : REV A Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM C 757 : 2016 : R2021 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder for Light Water Reactors
ASTM C 1068 : 2021 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM C 1672 : 2007 : R2014 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM C 859 : 2022 Standard Terminology Relating to Nuclear Materials
ASTM C 859 : 2022 : REV A Standard Terminology Relating to Nuclear Materials
ASTM C 753 : 2016 : REV A Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM C 1068 : 2003 Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry
ASTM D 1356 : 2015 : REV A Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1356 : 2005 : R2010 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM C 1672 : 2007 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer
ASTM D 1356 : 2020 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1356 : 2000 : REV A Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1356 : 2014 : REV B Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1356 : 2014 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 1356 : 2005 Standard Terminology Relating to Sampling and Analysis of Atmospheres
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM C 753 : 2016 : REV A : R2021 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.