![header thumbnail](/images/publishers\astm_cover.gif)
ASTM C 1852 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives
Hardcopy , PDF
14-05-2020
English
01-02-2017
CONTAINED IN VOL. 04.07, 2017 Defines the general use of aerosol polyurethane and aerosol latex foams extruded from pressurized containers intended for building envelope air barrier sealant and adhesive applications in building construction.
Committee |
C 24
|
DocumentType |
Guide
|
Pages |
7
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy |
1.1This guide covers the general use of aerosol polyurethane and aerosol latex foams extruded from pressurized containers intended for building envelope air barrier sealant and adhesive applications in building construction. It also provides an overview of associated standards and test methods that quantify key physical properties that are useful to design professionals, engineers, specifiers, and end users.
1.2Currently two main foam sealant types are applicable to this practice, single component polyurethane and latex types.
1.3The values stated in inch-pound units are to be regarded as standard. SI units provided are for information only and are not considered standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safety considerations see Section 7.
ASTM C 919 : 2019 | Standard Practice for Use of Sealants in Acoustical Applications |
ASTM D 3498 : 2001 | Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
ASTM C 1737 : 2010 : R2016 | Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing |
ASTM E 2112 : 2001 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM D 3498 : 2019 | Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing |
ASTM D 3498 : 1993 | Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
ASTM C 1737 : 2016 | Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing |
ASTM D 6464 : 2003 : REV A : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM C 1620 : 2016-03 | SPECIFICATION FOR AEROSOL POLYURETHANE AND AEROSOL LATEX FOAM SEALANTS |
ASTM E 2112 : 2019 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM C 1536 : 2002 | Standard Test Method for Measuring the Yield for Aerosol Foam Sealants |
ASTM C 1620 : 2005 | Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants |
ASTM E 2112 : 2018 : REV A | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM C 1536 : 2018 | Standard Test Method for Measuring the Yield for Aerosol Foam Sealants |
ASTM E 72 : 2015 : REDLINE | Standard Test Methods of Conducting Strength Tests of Panels for Building Construction |
ASTM E 2112 : 2007 : R2016 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM C 1642 : 2007 | Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials |
ASTM D 3498 : 2018 | Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing |
ASTM D 6464 : 1999 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM D 6464 : 2003 : REV A : R2017 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM E 2112 : 2018 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM E 2112 : 2019 : REV B | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM C 1620 : 2012 | Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants |
ASTM C 1536 : 2003 | Standard Test Method for Measuring the Yield for Aerosol Foam Sealants |
ASTM D 3498 : 1999 | Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
ASTM C 1642 : 2014 : REDLINE | Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials |
ASTM C 1643 : 2014 | Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants |
ASTM D 3498 : 2019 : REV A | Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing |
ASTM D 3498 : 2018 : EDT 1 | Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing |
ASTM E 2112 : 2007 | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM C 1642 : 2014 | Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials |
ASTM D 3498 : 2003 : R2011 | Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
ASTM E 2112 : 2018 : REV B | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM C 1620 : 2016 | Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants |
ASTM D 3498 : 2003 | Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems |
ASTM D 3498 : 2018 : REV A | Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing |
ASTM E 2112 : 2019 : REV A | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
NFPA 286 : 2015 | STANDARD METHODS OF FIRE TESTS FOR EVALUATING CONTRIBUTION OF WALL AND CEILING INTERIOR FINISH TO ROOM FIRE GROWTH |
ASTM D 6464 : 2003 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM C 1737 : 2010 | Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing |
ASTM D 6464 : 2003 : REV A : R2009 : EDT 1 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM C 1643 : 2008 | Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants |
ASTM C 1737 : 2016 : REDLINE | Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing |
ASTM D 6464 : 2003 : REV A | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM C 1643 : 2014 : REDLINE | Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants |
ASTM E 2112 : 2019 : REV C | Standard Practice for Installation of Exterior Windows, Doors and Skylights |
ASTM D 6464 : 2002 | Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing |
ASTM C 1536 : 2010 | Standard Test Method for Measuring the Yield for Aerosol Foam Sealants |
ASTM C 168 : 2017-06 | TERMINOLOGY RELATING TO THERMAL INSULATION |
ASTM C 1536 : 2019 | Standard Test Method for Measuring the Yield for Aerosol Foam Sealants |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.