ASTM C 297/C297M : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
English
01-04-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 15.03, 2017 Describes the flatwise tensile strength of the core, the core-to-facing bond, or the facing of an assembled sandwich panel.
| Committee |
D 30
|
| DevelopmentNote |
Supersedes ASTM C 297. (05/2004)
|
| DocumentType |
Redline
|
| Pages |
8
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This test method determines the flatwise tensile strength of the core, the core-to-facing bond, or the facing of an assembled sandwich panel. Permissible core material forms include those with continuous bonding surfaces (such as balsa wood and foams) as well as those with discontinuous bonding surfaces (such as honeycomb).
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the standard.
1.2.1Within the text the inch-pound units are shown in brackets.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM C 481 : 1999 | Standard Test Method for Laboratory Aging of Sandwich Constructions |
| ASTM D 5687/D5687M : 1995 : R2015 | Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation |
| SAE AMS 2950/1 : 2008 | PASTE ADHESIVE FOR CORE RESTORATION - PART 1: GENERAL REQUIREMENTS |
| ASTM C 481 : 1999 : R2005 | Standard Test Method for Laboratory Aging of Sandwich Constructions |
| ASTM C 481 : 1999 : R2011 | Standard Test Method for Laboratory Aging of Sandwich Constructions |
| ASTM D 5687/D5687M : 1995 : R2002 | Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation |
| ASTM E 1556 : 2012 : REDLINE | Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair |
| ASTM E 874 : 2011 : REDLINE | PRACTICE FOR ADHESIVE BONDING OF ALUMINUM FACINGS TO NONMETALLIC HONEYCOMB CORE FOR SHELTER PANELS |
| ASTM C 481 : 1999 : R2016 | Standard Test Method for Laboratory Aging of Sandwich Constructions |
| ISO 22452:2011 | Timber structures — Structural insulated panel walls — Test methods |
| ASTM E 2570/E2570M : 2007 : R2019 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
| MIL-PRF-32597 Base Document:2018 | CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE |
| 09/30195955 DC : 0 | BS ISO 22452 - TIMBER STRUCTURES - STRUCTURAL INSULATED PANEL WALLS - TEST METHODS |
| ASTM E 2570 : 2007 | Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage |
| ASTM D 7446 : 2009 | Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
| ASTM C 1167 : 2011 | Standard Specification for Clay Roof Tiles |
| ASTM D 7446 : 2009 : R2017 | Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials |
| ASTM D 7793 : 2017 : REDLINE | Standard Specification for Insulated Vinyl Siding |
| SAE AMS2950/1 | Paste Adhesive for Core Restoration Part 1 - General Requirements |
| ASTM D 5687/D5687M :1995 | Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation |
| ASTM C 1167 : 2011 : R2017 | Standard Specification for Clay Roof Tiles |
| ASTM D 5687/D5687M : 1995 : R2007 | Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation |
| ASTM E 865 : 2012 : REDLINE | Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels |
| ASTM E 122 : 2017 : REDLINE | Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process |
| ASTM E 177 : 2014 : REDLINE | Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods |
| ASTM D 5229/D5229M : 2014-06 | TEST METHOD FOR MOISTURE ABSORPTION PROPERTIES AND EQUILIBRIUM CONDITIONING OF POLYMER MATRIX COMPOSITE MATERIALS |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| ASTM D 2734 : 2016 : REDLINE | Standard Test Methods for Void Content of Reinforced Plastics |
| ASTM D 3171 : 2015 : REDLINE | Standard Test Methods for Constituent Content of Composite Materials |
| ASTM D 3039/D3039M : 2017 : REDLINE | Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials |
| ASTM C 271/C271M : 2016 : REDLINE | Standard Test Method for Density of Sandwich Core Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.