ASTM C 510 : 2016 : R2022
Current
The latest, up-to-date edition.
Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
Hardcopy , PDF
English
17-01-2022
Committee |
C 24
|
DocumentType |
Test Method
|
Pages |
2
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This test method covers an accelerated laboratory procedure to determine if a sample of a joint sealant will stain the substrate when in contract with masonry, concrete, or stone (such as marble, limestone, sandstone, and granite). This test method also is intended to determine whether the sealant itself will change in color when exposed to the weather.
1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E 2813 : 2018 | Standard Practice for Building Enclosure Commissioning |
ASTM D 2203 : 2001 : R2018 | Standard Test Method for Staining from Sealants |
ASTM C 1193 : 2016 | Standard Guide for Use of Joint Sealants |
ASTM C 1021 : 2008 : R2019 | Standard Practice for Laboratories Engaged in Testing of Building Sealants |
ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
ASTM C 920 : 2018 | Standard Specification for Elastomeric Joint Sealants |
ASTM C 109/C109M : 2020 : REV B | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
ASTM D 2203 : 2001 : R2023 | Standard Test Method for Staining from Sealants |
ASTM G 113 : 2024 | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
ASTM C 717 : 2019 | Standard Terminology of Building Seals and Sealants |
ASTM C 109/C109M : 2021 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
ASTM C 207 : 2018 | Standard Specification for Hydrated Lime for Masonry Purposes |
ASTM C 109/C109M : 2020 : REV A | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
ASTM C 109/C109M : 2023 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50mm [2 in.] Cube Specimens) |
ASTM C 207 : 2024 | Standard Specification for Hydrated Lime for Masonry Purposes |
ASTM C 109/C109M : 2016 : REV A | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
ASTM C 717 : 2024 | Standard Terminology of Building Seals and Sealants |
ASTM G 113 : 2016 | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
ASTM G 113 : 2022 | Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.