![header thumbnail](/images/publishers\astm_cover.gif)
ASTM C 533 : 2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
Hardcopy , PDF
30-03-2023
English
10-11-2017
Committee |
C 16
|
DocumentType |
Standard
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers calcium silicate block and pipe thermal insulation for use on surfaces with temperatures between 80 and 1700°F (27 to 927°C), unless otherwise agreed upon between the manufacturer and the purchaser.
1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3The following safety hazards caveat pertains only to the test method (Section 12) described in this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 683 : 2021 | Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery |
ASTM C 419 : 2020 | Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings |
ASTM C 1696 : 2020 | Standard Guide for Industrial Thermal Insulation Systems |
ASTM C 1558 : 2019 | Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation |
ASTM C 165 : 2023 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
ASTM C 585 : 2022 | Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing |
ASTM C 168 : 2019 | Standard Terminology Relating to Thermal Insulation |
ASTM C 1045 : 2019 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM C 177 : 2019 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
ASTM C 1114 : 2006 : R2013 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM C 1114 : 2006 : R2019 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM C 1045 : 2007 : R2013 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM C 303 : 2021 | Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation |
ASTM C 446 : 1988 : R1993 : EDT 1 | Standard Test Method for Breaking Load and Calculated Modulus of Rupture of Preformed Insulation for Pipes (Withdrawn 2002) |
ASTM C 1616 : 2007 : EDT 1 | Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight |
ASTM C 303 : 2010 : R2016 : EDT 1 | Standard Test Method for Dimensions and Density of Preformed Block and Board–Type Thermal Insulation |
ASTM C 356 : 2022 | Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat |
ASTM C 302 : 1995 | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
ASTM C 1058 : 1997 | Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
ASTM E 136 : 2022 | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750 °C |
ASTM C 1058 : 2003 | Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
ASTM E 84 : 2023 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 1616 : 2007 : R2012 | Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight |
ASTM C 1114 : 2006 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM E 136 : 2019 : REV A | Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750°C |
ASTM C 1045 : 2001 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM E 84 : 2021 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 518 : 2002 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM C 356 : 2017 | Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat |
ASTM E 84 : 2022 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 1617 : 2005 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
ASTM C 1617 : 2018 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
ASTM C 302 : 2013 : R2017 | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
ASTM E 84 : 2020 | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM E 84 : 2021 : REV A | Standard Test Method for Surface Burning Characteristics of Building Materials |
ASTM C 165 : 2007 : R2017 | Standard Test Method for Measuring Compressive Properties of Thermal Insulations |
ASTM C 1114 : 2000 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM C 1617 : 2018 : REV A | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
ASTM C 1617 : 2009 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
ASTM C 518 : 2017 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM C 1616 : 2005 | Standard Test Method for Determining the Moisture Content of Inorganic Insulation Materials by Weight |
ASTM C 518 : 2021 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
ASTM C 1114 : 2000 : R2006 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus |
ASTM C 1045 : 1997 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM C 585 : 2010 : R2016 | Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing |
ASTM C 1616 : 2007 | Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight |
ASTM C 177 : 2019 : EDT 1 | Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus |
ASTM C 168 : 2022 | Standard Terminology Relating to Thermal Insulation |
ASTM C 302 : 2013 : R2022 | Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation |
ASTM C 1616 : 2007 : R2018 | Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight |
ASTM C 203 : 2022 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation |
ASTM C 1058 : 2003 : R2008 | Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation |
ASTM C 203 : 2005 : REV A : R2017 | Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation |
ASTM C 1045 : 2007 | Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions |
ASTM C 1617 : 2019 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
ASTM C 795 : 1992 : R1998 : EDT 1 | Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel |
ASTM C 1617 : 2015 | Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals |
ASTM C 303 : 1998 | Standard Test Method for Dimensions and Density of Preformed Block and Broad-Type Thermal Insulation |
ASTM C 518 : 1998 | Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.