![header thumbnail](/images/publishers\astm_cover.gif)
ASTM C 595/C595M : 2024
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification for Blended Hydraulic Cements
Hardcopy , PDF
English
24-07-2024
Committee |
C 01
|
DocumentType |
Standard
|
Pages |
9
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification pertains to blended hydraulic cements for both general and special applications, using slag, pozzolan, limestone, or some combination of these, with portland cement or portland cement clinker or slag with lime.
Note 1:This specification prescribes ingredients and proportions, with some performance requirements, whereas Performance Specification C1157/C1157M is a hydraulic cement specification in which performance criteria alone govern the products and their acceptance.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Values in SI units [or inch-pound units] shall be obtained by measurement in SI units [or inch-pound units] or by appropriate conversion, using the Rules for Conversion and Rounding given in IEEE/ASTM SI 10, of measurements made in other units [or SI units]. Values are stated in only SI units when inch-pound units are not used in practice.
1.3The text of this specification refers to notes and footnotes, which provide explanatory material. These notes and footnotes (excluding those in tables and figures) are not requirements of the standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 858 : 2019 | Standard Specification for Underground Precast Concrete Utility Structures |
ASTM C 1944/C1944M : 2024 | Standard Specification for Pedestal-Set Concrete Paving Slabs |
ASTM C 311/C311M : 2024 | Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete |
ASTM C 118/C118M : 2024 | Standard Specification for Concrete Pipe for Irrigation or Drainage |
ASTM C 183/C183M : 2023 | Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement |
ASTM C 412 : 2019 | Standard Specification for Concrete Drain Tile |
ASTM C 1012/C1012M : 2024 | Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution |
ASTM C 507M : 2022 | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM C 1786 : 2019 | Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD |
ASTM C 219 : 2024 | Standard Terminology Relating to Hydraulic and Other Inorganic Cements |
ASTM D 558/D558M : 2019 | Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures |
ASTM C 989/C989M : 2024 | Standard Specification for Slag Cement for Use in Concrete and Mortars |
ASTM C 1089 : 2019 | Standard Specification for Spun Cast Prestressed Concrete Poles |
ASTM C 1894 : 2022 | Standard Guide for Microbially Induced Corrosion of Concrete Products |
ASTM C 1670/C1670M : 2024 | Standard Specification for Adhered Manufactured Stone Masonry Veneer Units |
ASTM G 109 : 2023 | Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments |
ASTM C 887 : 2020 | Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
ASTM C 1634 : 2023 : REV A | Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units |
ASTM C 563 : 2020 | Standard Guide for Approximation of Optimum SO<inf>3</inf> in Hydraulic Cement |
ASTM C 1293/C1293M : 2023 : REV A | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
ASTM C 476 : 2023 | Standard Specification for Grout for Masonry |
ASTM E 2277 : 2014(R2019) | Standard Guide for Design and Construction of Coal Ash Structural Fills |
ASTM C 1713 : 2023 | Standard Specification for Mortars for the Repair of Historic Masonry |
ASTM C 1433 : 2020 : EDT 1 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers |
ASTM C 1260 : 2023 | Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method) |
ASTM C 1846/C1846M : 2019 : R2024 | Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM C 1105 : 2023 : REV A | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
ASTM C 506M : 2022 : REV A | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM C 412M : 2019 | Standard Specification for Concrete Drain Tile (Metric) |
ASTM C 1782/C1782M : 2024 | Standard Specification for Segmental Concrete Paving Slabs |
ASTM C 1818 : 2022 | Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM C 1731 : 2021 | Standard Specification for Concrete Floor Tile |
ASTM C 90 : 2024 | Standard Specification for Loadbearing Concrete Masonry Units |
ASTM C 1492 : 2022 | Standard Specification for Concrete Roof Tile |
ASTM C 1319 : 2023 : REV A | Standard Specification for Concrete Grid Paving Units |
ASTM C 617/C617M : 2023 | Standard Practice for Capping Cylindrical Concrete Specimens |
ASTM C 478/C478M : 2022 | Standard Specification for Circular Precast Reinforced Concrete Manhole Sections |
ASTM C 226 : 2022 | Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement |
ASTM C 1778 : 2023 | Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete |
ASTM C 129 : 2023 | Standard Specification for Nonloadbearing Concrete Masonry Units |
ASTM C 1450/C1450M : 2004 : R2019 : EDT 1 | Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe |
ASTM C 1776/C1776M : 2017 : R2022 | Standard Specification for Wet-Cast Precast Modular Retaining Wall Units |
ASTM C 685/C685M : 2017 | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
ASTM C 505M : 2019 | Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric) |
ASTM C 1903 : 2024 | Standard Specification for Precast Concrete Duct Bank |
ASTM C 985 : 2022 | Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe |
ASTM C 1447/C1447M : 2004 : R2019 : EDT 1 | Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe |
ASTM C 655M : 2019 : REV A | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM C 1448/C1448M : 2005 : R2019 : EDT 1 | Standard Specification for Non-Asbestos Fiber-Cement Conduit |
ASTM D 5759 : 2012 : R2020 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
ASTM C 1227 : 2024 | Standard Specification for Precast Concrete Septic Tanks |
ASTM C 76M : 2022 : REV A | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM C 654M : 2019 | Standard Specification for Porous Concrete Pipe (Metric) |
ASTM C 1372 : 2023 | Standard Specification for Dry-Cast Segmental Retaining Wall Units |
ASTM C 507 : 2022 | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe |
ASTM C 361 : 2022 | Standard Specification for Reinforced Concrete Low-Head Pressure Pipe |
ASTM C 506 : 2022 : REV A | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe |
ASTM C 936/C936M : 2024 | Standard Specification for Solid Concrete Interlocking Paving Units |
ASTM C 1623 : 2023 | Standard Specification for Manufactured Concrete Masonry Lintels |
ASTM C 913 : 2023 | Standard Specification for Precast Concrete Water and Wastewater Structures |
ASTM C 465 : 2023 | Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements |
ASTM C 1932 : 2023 | Standard Specification for Manufacture of Reinforced Precast Concrete End Sections for Pipe |
ASTM C 935 : 2019 | Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast |
ASTM C 1504M : 2020 | Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric) |
ASTM C 55 : 2023 | Standard Specification for Concrete Building Brick |
ASTM C 94/C94M : 2024 : REV A | Standard Specification for Ready-Mixed Concrete |
ASTM D 6684 : 2018 | Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems |
ASTM C 1837 : 2022 | Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures |
ASTM C 1417 : 2019 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design |
ASTM G 180 : 2023 | Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries |
ASTM C 1804 : 2020 | Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
ASTM C 655 : 2019 : REV A | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe |
ASTM C 139 : 2023 | Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes |
ASTM C 185 : 2020 | Standard Test Method for Air Content of Hydraulic Cement Mortar |
ASTM C 1884 : 2024 | Standard Specification for Manufactured Concrete Ballast Units |
ASTM C 1433M : 2022 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
ASTM D 560/D560M : 2016 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
ASTM C 1449/C1449M : 2005 : REV A : R2019 : EDT 1 | Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe |
ASTM C 76 : 2022 : REV A | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM C 1904 : 2022 | Standard Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products |
ASTM C 361M : 2022 | Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric) |
ASTM C 387/C387M : 2023 | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
ASTM C 1882/C1882M : 2024 | Standard Specification for Anti-washout Admixtures for Concrete |
ASTM C 1154 : 2024 : REV A | Standard Terminology for Fiber-Reinforced Cement Products |
ASTM C 1613 : 2024 : REV A | Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks |
ASTM A 1105 : 2017 : R2022 | Standard Specification for Corrugated Steel Manhole Assemblies |
ASTM C 1707 : 2018 | Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes |
ASTM C 270 : 2024 | Standard Specification for Mortar for Unit Masonry |
ASTM C 1364 : 2023 | Standard Specification for Architectural Cast Stone |
ASTM C 926 : 2024 | Standard Specification for Application of Portland Cement-Based Plaster |
ASTM C 654 : 2019 | Standard Specification for Porous Concrete Pipe |
ASTM C 1417M : 2019 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
ASTM C 882/C882M : 2023 | Standard Test Method for Bond Strength of Bonding Systems Used With Concrete By Slant Shear |
ASTM C 1693 : 2011 : R2017 | Standard Specification for Autoclaved Aerated Concrete (AAC) |
ASTM C 1577 : 2020 : EDT 1 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD |
ASTM C 191 : 2021 | Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle |
ASTM C 505 : 2019 | Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints |
ASTM C 1504 : 2020 | Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains |
ASTM C 14 : 2020 | Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe |
ASTM C 1765 : 2024 | Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM C 109/C109M : 2023 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50mm [2 in.] Cube Specimens) |
ASTM D 8021 : 2023 | Standard Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture of Iron and Steel |
ASTM C 1222 : 2023 | Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement |
ASTM C 985M : 2022 | Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM D 559/D559M : 2015 : R2023 | Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures |
ASTM C 915 : 1979 : R2018 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
ASTM C 1877 : 2024 | Standard Specification for Adhered Concrete Masonry Units |
ASTM C 1157/C1157M : 2023 | Standard Performance Specification for Hydraulic Cement |
ASTM C 14M : 2020 | Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric) |
ASTM C 1581/C1581M : 2018 : REV A | Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.