ASTM C 617/C617M : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Capping Cylindrical Concrete Specimens
Hardcopy , PDF
16-11-2023
English
21-05-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 09
|
| DocumentType |
Standard Practice
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This practice covers apparatus, materials, and procedures for capping freshly molded concrete cylinders with neat cement and hardened cylinders and drilled concrete cores with high-strength gypsum paste or sulfur mortar.
1.2The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precaution statements see 4.3.1 and 6.2.4.1.
| ASTM C 918/C918M : 2020 | Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength |
| ASTM C 293/C293M : 2016 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading) |
| ASTM C 192/C192M : 2019 | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
| ASTM C 465 : 2023 | Standard Specification for Processing Additions for Use in the Manufacture<brk/> of Hydraulic Cements |
| ASTM C 780 : 2023 | Standard Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM D 8337/D8337M : 2021 | Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test |
| ASTM C 513/C513M : 2011 : R2019 | Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength |
| ASTM C 882/C882M : 2020 | Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear |
| ASTM C 495/C495M : 2012 : R2019 | Standard Test Method for Compressive Strength of Lightweight Insulating Concrete |
| ASTM C 1077 : 2017 | Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation |
| ASTM C 39/C39M : 2021 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
| ASTM D 4832/D4832M : 2023 | Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Cylindrical Test Specimens |
| ASTM C 78/C78M : 2022 | Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading) |
| ASTM C 1552 : 2023 | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM D 7913/D7913M : 2014 : R2020 | Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing |
| ASTM C 1604/C1604M : 2005 : R2019 | Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete |
| ASTM C 42/C42M : 2020 | Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete |
| ASTM C 31/C31M : 2023 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
| ASTM C 497 : 2020 : EDT 1 | Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile |
| ASTM C 873/C873M : 2023 | Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds |
| ASTM C 39/C39M : 2023 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
| ASTM C 1231/C1231M : 2023 | Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Cylindrical Concrete Specimens |
| ASTM C 1552/C1552M : 2023 : REV A | Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing |
| ASTM C 109/C109M : 2020 : REV B | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
| ASTM C 109/C109M : 2021 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
| ASTM C 109/C109M : 2020 : REV A | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
| ASTM C 1231/C1231M : 2010 | Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders |
| ASTM C 1231/C1231M : 2014 | Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders |
| ASTM C 109/C109M : 2016 : REV A | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
| ASTM C 150 : 2002 : REV A : EDT 1 | Standard Specification for Portland Cement |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.