• Shopping Cart
    There are no items in your cart

ASTM C 618 : 2019

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

Available format(s)

Hardcopy , PDF

Superseded date

23-08-2022

Superseded by

ASTM C 618 : 2022

Language(s)

English

Published date

11-02-2019

€67.30
Excluding VAT

This specification covers coal fly ash and raw or calcined natural pozzolan for use in concrete where cementitious or pozzolanic action, or both, is desired, or where other properties normally attributed to fly ash or pozzolans may be desired, or where both objectives are to be achieved.

Committee
C 09
DocumentType
Standard
Pages
5
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This specification covers coal fly ash and raw or calcined natural pozzolan for use in concrete where cementitious or pozzolanic action, or both, is desired, or where other properties normally attributed to fly ash or pozzolans may be desired, or where both objectives are to be achieved.

Note 1:Finely divided materials may tend to reduce the entrained air content of concrete. Hence, if a fly ash or natural pozzolan is added to any concrete for which entrainment of air is specified, provision should be made to ensure that the specified air content is maintained by air content tests and by use of additional air-entraining admixture or use of an air-entraining admixture in combination with air-entraining hydraulic cement.

1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3The text of this standard references notes and footnotes, which provide explanatory information. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C 1709 : 2018 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
ASTM C 1697 : 2021 Standard Specification for Blended Supplementary Cementitious Materials
ASTM C 1670/C1670M : 2021 : REV B Standard Specification for Adhered Manufactured Stone Masonry Veneer Units
ASTM C 1778 : 2022 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
ASTM C 1089 : 2019 Standard Specification for Spun Cast Prestressed Concrete Poles
ASTM C 1894 : 2022 Standard Guide for Microbially Induced Corrosion of Concrete Products
ASTM C 887 : 2020 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
ASTM C 55 : 2017 Standard Specification for Concrete Building Brick
ASTM C 76 : 2022 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C 1846/C1846M : 2019 Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C 1154 : 2006 : R2016 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
ASTM C 118 : 2019 Standard Specification for Concrete Pipe for Irrigation or Drainage
ASTM C 1623 : 2017 : REV A Standard Specification for Manufactured Concrete Masonry Lintels
ASTM C 412M : 2019 Standard Specification for Concrete Drain Tile (Metric)
ASTM C 1491 : 2019 Standard Specification for Concrete Roof Pavers (Withdrawn 2023)
ASTM C 1818 : 2022 Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
ASTM C 1731 : 2021 Standard Specification for Concrete Floor Tile
ASTM C 1492 : 2022 Standard Specification for Concrete Roof Tile
ASTM C 1012/C1012M : 2018 : REV B Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
ASTM C 655M : 2019 : REV A Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 685/C685M : 2017 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
ASTM C 505M : 2019 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
ASTM F 1090 : 2015 Standard Classification for Bank and Mercantile Vault Construction
ASTM D 5759 : 2012 : R2020 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
ASTM C 1782/C1782M : 2021 Standard Specification for Segmental Concrete Paving Slabs
ASTM C 139 : 2017 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
ASTM E 2277 : 2014(R2019) Standard Guide for Design and Construction of Coal Ash Structural Fills
ASTM C 1227 : 2022 Standard Specification for Precast Concrete Septic Tanks
ASTM D 5139 : 2019 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM C 1504M : 2020 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
ASTM C 1293 : 2020 : REV A Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
ASTM A 849 : 2015 : R2021 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
ASTM D 6684 : 2018 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems
ASTM C 1837 : 2022 Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures
ASTM C 1417 : 2019 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
ASTM C 1804 : 2020 Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
ASTM E 1266 : 2020 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM C 655 : 2019 : REV A Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
ASTM C 1567 : 2021 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
ASTM C 1884 : 2019 Standard Specification for Concrete Ballast Block
ASTM C 1904 : 2020 Standard Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products
ASTM C 985 : 2019 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
ASTM C 1613 : 2022 Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
ACI PRC 506.5:2022 Specifying Underground Shotcrete - Guide
ASTM C 1776/C1776M : 2017 : R2022 Standard Specification for Wet-Cast Precast Modular Retaining Wall Units
ASTM C 90 : 2022 Standard Specification for Loadbearing Concrete Masonry Units
ASTM D 2902 : 2021 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation
ASTM E 2129 : 2018 Standard Practice for Data Collection for Sustainability Assessment of Building Products
ASTM C 654M : 2019 Standard Specification for Porous Concrete Pipe (Metric)
ASTM C 1790 : 2021 Standard Specification for Fly Ash Facing Brick
ASTM C 1433M : 2020 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
ASTM C 938 : 2019 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
ASTM C 913 : 2021 Standard Specification for Precast Concrete Water and Wastewater Structures
ASTM C 506M : 2020 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 935 : 2019 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
ASTM A 979/A979M : 2003(R2019) Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
ASTM C 311/C311M : 2022 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
ASTM C 936/C936M : 2021 : REV B Standard Specification for Solid Concrete Interlocking Paving Units
ASTM C 441/C441M : 2017 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
ASTM E 3183 : 2019 Standard Guide for Harvesting Coal Combustion Products Stored in Active and Inactive Storage Areas for Beneficial Use
ASTM C 1634 : 2020 Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units
ASTM C 654 : 2019 Standard Specification for Porous Concrete Pipe
ASTM C 1417M : 2019 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
ASTM C 1319 : 2021 Standard Specification for Concrete Grid Paving Units
ASTM C 1693 : 2011 : R2017 Standard Specification for Autoclaved Aerated Concrete (AAC)
ASTM C 505 : 2019 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
ASTM C 1504 : 2020 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
ASTM C 937 : 2016 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
ASTM C 361 : 2019 : REV A Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
ASTM C 14 : 2020 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
ASTM C 1372 : 2017 Standard Specification for Dry-Cast Segmental Retaining Wall Units
ASTM C 1903 : 2021 Standard Specification for Precast Concrete Duct Bank
ASTM C 915 : 1979 : R2018 Standard Specification for Precast Reinforced Concrete Crib Wall Members
ASTM C 507 : 2020 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
ASTM C 109/C109M : 2021 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens)
ASTM C 387/C387M : 2017 Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
ASTM C 14M : 2020 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
ASTM C 129 : 2017 Standard Specification for Nonloadbearing Concrete Masonry Units
ASTM C 1141/C1141M : 2015 Standard Specification for Admixtures for Shotcrete (Withdrawn 2024)
ASTM C 94/C94M : 2022 Standard Specification for Ready-Mixed Concrete
ASTM C 858 : 2019 Standard Specification for Underground Precast Concrete Utility Structures
ASTM C 118M : 2019 Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric) (Withdrawn 2024)
ASTM C 76M : 2022 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 412 : 2019 Standard Specification for Concrete Drain Tile
ASTM A 1105 : 2017 Standard Specification for Corrugated Steel Manhole Assemblies
ASTM C 476 : 2020 Standard Specification for Grout for Masonry
ASTM C 506 : 2020 : EDT 1 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
ASTM C 507M : 2020 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C 1786 : 2019 Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD

ASTM C 125 : 2021 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 1778 : 2019 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
ASTM C 311/C311M : 2018 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
ASTM C 1778 : 2016 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
ASTM C 125 : 2000 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 311/C311M : 2022 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
ASTM C 1778 : 2022 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
ASTM C 1778 : 2014 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
ASTM C 1778 : 2019 : REV B Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
ASTM C 125 : 2021 : REV A Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 1778 : 2019 : REV A Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
ASTM C 1778 : 2020 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
ASTM C 125 : 2020 Standard Terminology Relating to Concrete and Concrete Aggregates
ASTM C 125 : 2009 Standard Terminology Relating to Concrete and Concrete Aggregates

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.