![header thumbnail](/images/publishers\astm_cover.gif)
ASTM C 618 : 2023 : EDT 1
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\astm_cover.gif)
Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
Hardcopy , PDF
English
21-03-2023
Committee |
C 09
|
DocumentType |
Standard
|
Pages |
5
|
ProductNote |
ε1 NOTE—Editorial corrections were made to the text and Table 2 in March 2023.
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1This specification covers coal ash and raw or calcined natural pozzolan, for use in concrete where cementitious or pozzolanic action, or both, is desired, or where other properties normally attributed to coal ash or natural pozzolans may be desired, or where both objectives are to be achieved.
Note 1:Finely divided materials may tend to reduce the entrained air content of concrete. Hence, if a coal ash or natural pozzolan is added to any concrete for which entrainment of air is specified, provision should be made to ensure that the specified air content is maintained by air content tests and by use of additional air-entraining admixture or use of an air-entraining admixture in combination with air-entraining hydraulic cement.
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3The text of this standard references notes and footnotes, which provide explanatory information. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 858 : 2019 | Standard Specification for Underground Precast Concrete Utility Structures |
ASTM C 118M : 2019 | Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric) (Withdrawn 2024) |
ASTM C 1372 : 2022 | Standard Specification for Dry-Cast Segmental Retaining Wall Units |
ASTM C 412 : 2019 | Standard Specification for Concrete Drain Tile |
ASTM C 1141/C1141M : 2015 | Standard Specification for Admixtures for Shotcrete (Withdrawn 2024) |
ASTM C 139 : 2022 | Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes |
ASTM C 507M : 2022 | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM C 1786 : 2019 | Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD |
ASTM C 1697 : 2021 | Standard Specification for Blended Supplementary Cementitious Materials |
ASTM C 1670/C1670M : 2021 : REV B | Standard Specification for Adhered Manufactured Stone Masonry Veneer Units |
ASTM C 1778 : 2022 | Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete |
ASTM C 1089 : 2019 | Standard Specification for Spun Cast Prestressed Concrete Poles |
ASTM C 1894 : 2022 | Standard Guide for Microbially Induced Corrosion of Concrete Products |
ASTM C 887 : 2020 | Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar |
ASTM C 1567 : 2022 | Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method) |
ASTM E 2277 : 2014(R2019) | Standard Guide for Design and Construction of Coal Ash Structural Fills |
ASTM C 476 : 2023 | Standard Specification for Grout for Masonry |
ASTM C 1227 : 2022 | Standard Specification for Precast Concrete Septic Tanks |
ASTM C 1433 : 2020 : EDT 1 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers |
ASTM C 1846/C1846M : 2019 | Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM C 1154 : 2006 : R2016 | Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products |
ASTM C 118 : 2019 | Standard Specification for Concrete Pipe for Irrigation or Drainage |
ASTM C 506M : 2022 : REV A | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM C 412M : 2019 | Standard Specification for Concrete Drain Tile (Metric) |
ASTM C 1634 : 2023 | Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units |
ASTM C 1623 : 2022 | Standard Specification for Manufactured Concrete Masonry Lintels |
ASTM C 1491 : 2019 | Standard Specification for Concrete Roof Pavers (Withdrawn 2023) |
ASTM C 1818 : 2022 | Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM C 1731 : 2021 | Standard Specification for Concrete Floor Tile |
ASTM C 1492 : 2022 | Standard Specification for Concrete Roof Tile |
ASTM C 1012/C1012M : 2018 : REV B | Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution |
ASTM C 655M : 2019 : REV A | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM C 1776/C1776M : 2017 : R2022 | Standard Specification for Wet-Cast Precast Modular Retaining Wall Units |
ASTM C 685/C685M : 2017 | Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing |
ASTM C 478/C478M : 2022 | Standard Specification for Circular Precast Reinforced Concrete Manhole Sections |
ASTM C 505M : 2019 | Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric) |
ASTM C 985 : 2022 | Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe |
ASTM F 1090 : 2015 | Standard Classification for Bank and Mercantile Vault Construction |
ASTM D 5759 : 2012 : R2020 | Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses |
ASTM C 1782/C1782M : 2021 | Standard Specification for Segmental Concrete Paving Slabs |
ASTM C 76M : 2022 : REV A | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM D 2902 : 2021 | Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation |
ASTM E 2129 : 2018 | Standard Practice for Data Collection for Sustainability Assessment of Building Products |
ASTM C 654M : 2019 | Standard Specification for Porous Concrete Pipe (Metric) |
ASTM C 1790 : 2021 | Standard Specification for Fly Ash Facing Brick |
ASTM C 507 : 2022 | Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe |
ASTM C 361 : 2022 | Standard Specification for Reinforced Concrete Low-Head Pressure Pipe |
ASTM C 938 : 2019 | Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete |
ASTM C 506 : 2022 : REV A | Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe |
ASTM C 913 : 2021 | Standard Specification for Precast Concrete Water and Wastewater Structures |
ASTM C 1932 : 2023 | Standard Specification for Manufacture of Reinforced Precast Concrete End Sections for Pipe |
ASTM C 935 : 2019 | Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast |
ASTM A 979/A979M : 2003(R2019) | Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field |
ASTM D 5139 : 2019 | Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants |
ASTM C 55 : 2022 | Standard Specification for Concrete Building Brick |
ASTM C 1504M : 2020 | Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric) |
ASTM C 1293 : 2020 : REV A | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
ASTM A 849 : 2015 : R2021 | Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe |
ASTM D 6684 : 2018 | Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems |
ASTM C 1837 : 2022 | Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures |
ASTM C 1417 : 2019 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design |
ASTM C 1804 : 2020 | Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles |
ASTM E 1266 : 2020 | Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications |
ASTM C 655 : 2019 : REV A | Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe |
ASTM C 1433M : 2022 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
ASTM C 76 : 2022 : REV A | Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe |
ASTM C 90 : 2022 | Standard Specification for Loadbearing Concrete Masonry Units |
ASTM C 1904 : 2022 | Standard Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products |
ASTM C 311/C311M : 2022 | Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete |
ASTM C 361M : 2022 | Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric) |
ASTM C 936/C936M : 2021 : REV B | Standard Specification for Solid Concrete Interlocking Paving Units |
ASTM A 1105 : 2017 : R2022 | Standard Specification for Corrugated Steel Manhole Assemblies |
ASTM C 94/C94M : 2022 : REV A | Standard Specification for Ready-Mixed Concrete |
ASTM C 441/C441M : 2017 | Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction |
ASTM E 3183 : 2019 | Standard Guide for Harvesting Coal Combustion Products Stored in Active and Inactive Storage Areas for Beneficial Use |
ASTM C 1364 : 2023 | Standard Specification for Architectural Cast Stone |
ASTM C 1866/C1866M : 2022 | Standard Specification for Ground-Glass Pozzolan for Use in Concrete |
ASTM C 654 : 2019 | Standard Specification for Porous Concrete Pipe |
ASTM C 1884 : 2022 | Standard Specification for Concrete Ballast Block |
ASTM C 1417M : 2019 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
ASTM C 1319 : 2021 | Standard Specification for Concrete Grid Paving Units |
ASTM C 1693 : 2011 : R2017 | Standard Specification for Autoclaved Aerated Concrete (AAC) |
ASTM C 1577 : 2020 : EDT 1 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD |
ASTM C 505 : 2019 | Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints |
ASTM C 1504 : 2020 | Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains |
ASTM C 937 : 2016 | Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete |
ASTM C 14 : 2020 | Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe |
ASTM C 985M : 2022 | Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric) |
ASTM C 1903 : 2021 | Standard Specification for Precast Concrete Duct Bank |
ASTM C 1709 : 2022 | Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete |
ASTM C 915 : 1979 : R2018 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
ASTM C 109/C109M : 2021 | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50mm] Cube Specimens) |
ASTM C 1613 : 2022 | Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks |
ASTM C 14M : 2020 | Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric) |
ASTM C 129 : 2022 | Standard Specification for Nonloadbearing Concrete Masonry Units |
ASTM C 387/C387M : 2017 | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
ASTM C 311/C311M : 2024 | Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete |
ASTM C 136/C136M : 2014 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
ASTM C 1778 : 2023 | Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.