• Shopping Cart
    There are no items in your cart

ASTM C 665 : 2017

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

Available format(s)

Hardcopy , PDF

Superseded date

24-06-2023

Superseded by

ASTM C 665 : 2023

Language(s)

English

Published date

20-09-2017

€67.30
Excluding VAT

This specification covers the composition and physical properties of mineral-fiber blanket insulation used to thermally or acoustically insulate ceilings, floors, and walls in light frame construction and manufactured housing.

Committee
C 16
DocumentType
Standard
Pages
6
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This specification covers the composition and physical properties of mineral-fiber blanket insulation used to thermally or acoustically insulate ceilings, floors, and walls in light frame construction and manufactured housing. The requirements cover fibrous blankets and facings. Values for water-vapor permeance of facings are suggested for information that will be helpful to designers and installers.

1.2The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM C 1014 : 2017 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
ASTM C 991 : 2023 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
ASTM C 1373/C1373M : 2011 : R2017 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
ASTM C 1594 : 2023 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
ASTM C 726 : 2017 Standard Specification for Mineral Wool Roof Insulation Board
ASTM C 1676/C1676M : 2019 Standard Specification for Microporous Thermal Insulation
ASTM C 1685 : 2015 : R2021 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
ASTM C 1696 : 2020 Standard Guide for Industrial Thermal Insulation Systems
ASTM C 1558 : 2019 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
ASTM C 892 : 2019 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
ASTM C 612 : 2014(R2019) Standard Specification for Mineral Fiber Block and Board Thermal Insulation
ASTM C 1482 : 2023 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
ASTM C 1320 : 2020 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
ASTM C 1534 : 2022 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
ASTM C 553 : 2013 : R2019 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
ASTM C 592 : 2022 : REV A Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
ASTM C 1393 : 2019 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
ASTM C 547 : 2022 : REV A Standard Specification for Mineral Fiber Pipe Insulation
ASTM C 1290 : 2016 : R2021 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
ASTM C 1071 : 2019 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

ASTM C 168 : 2019 Standard Terminology Relating to Thermal Insulation
ASTM C 177 : 2019 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C 1304 : 2008 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
ASTM E 96/E96M : 2022 : REV A : EDT 1 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 96/E96M : 2022 : REV A Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM C 1304 : 2008 : R2013 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
ASTM E 96/E96M : 2021 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM C 1304 : 2018 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
ASTM C 1338 : 2000 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM E 96/E96M : 2022 Standard Test Methods for Gravimetric Determination of Water Vapor Transmission Rate of Materials
ASTM E 84 : 2023 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 970 : 2017 : EDT 1 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
ASTM C 1338 : 2014 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM E 84 : 2021 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 518 : 2002 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM E 84 : 2022 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 1338 : 2019 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM C 1338 : 2008 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM C 1617 : 2005 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
ASTM C 1304 : 1995 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
ASTM C 167 : 2022 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
ASTM C 1617 : 2018 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
ASTM C 1338 : 2019 : R2022 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM E 84 : 2020 Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM E 84 : 2021 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 1617 : 2018 : REV A Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
ASTM E 96/E96M : 2016 Standard Test Methods for Water Vapor Transmission of Materials
ASTM C 1617 : 2009 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
ASTM C 518 : 2017 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C 518 : 2021 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C 167 : 2018 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
ASTM C 177 : 2019 : EDT 1 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C 167 : 1998 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
ASTM C 168 : 2022 Standard Terminology Relating to Thermal Insulation
ASTM E 84 : 2023 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
ASTM C 1617 : 2019 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
ASTM C 1617 : 2015 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
ASTM E 970 : 2017 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
ASTM C 518 : 1998 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.