ASTM C 698 : 2016 : REDLINE
Current
The latest, up-to-date edition.
Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)
English
01-06-2016
CONTAINED IN VOL. 12.01, 2016 Defines procedures for the chemical, mass spectrometric, and spectrochemical analysis of nucleargrade mixed oxides, (U, Pu)O[2], powders and pellets to determine compliance with specifications.
Committee |
C 26
|
DocumentType |
Redline
|
Pages |
40
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
1.1These test methods cover procedures for the chemical, mass spectrometric, and spectrochemical analysis of nuclear-grade mixed oxides, (U, Pu)O2, powders and pellets to determine compliance with specifications.
1.2The analytical procedures appear in the following order:
Sections | |
Uranium in the Presence of Pu by Potentiometric Titration | 2 |
Plutonium by Controlled-Potential Coulometry | 2 |
Plutonium by Amperometric Titration with Iron (II) | 2 |
Nitrogen by Distillation Spectrophotometry Using Nessler Reagent | 8 to 15 |
Carbon (Total) by Direct Combustion-Thermal Conductivity | 16 to 26 |
Total Chlorine and Fluorine by Pyrohydrolysis | 27 to 34 |
Sulfur by Distillation-Spectrophotometry | 35 to 43 |
Moisture by the Coulometric, Electrolytic Moisture Analyzer | 44 to 51 |
Isotopic Composition by Mass Spectrometry | 3 |
Rare Earths by Copper Spark Spectroscopy | 52 to 59 |
Trace Impurities by Carrier Distillation Spectroscopy | 60 to 68 |
Impurities by Spark-Source Mass Spectrography | 69 to 75 |
Total Gas in Reactor-Grade Mixed Dioxide Pellets | 4 |
Tungsten by Dithiol-Spectrophotometry | 76 to 84 |
Rare Earth Elements by Spectroscopy | 85 to 88 |
Plutonium-238 Isotopic Abundance by Alpha Spectrometry | 5 |
Americium-241 in Plutonium by Gamma-Ray Spectrometry | |
Uranium and Plutonium Isotopic Analysis by Mass Spectrometry | 89 to 97 |
Oxygen-to-Metal Atom Ratio by Gravimetry | 98 to 105 |
1.3The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. (For specific safety precaution statements, see Sections 6, 13.2.5, 41.7, and 93.6.1.)
BS ISO 21613 : 2015 | (U, PU)O[2] POWDERS AND SINTERED PELLETS - DETERMINATION OF CHLORINE AND FLUORINE |
ASTM C 1854 : 2017 | Standard Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O<inf>2</inf>) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Measurement |
ASTM C 1030 : 2010 | Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry |
ASTM D 6884 : 2003 : R2010 | Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems |
ASTM C 1853 : 2017 | Standard Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U, Pu)O<inf>2</inf>) Sintered Pellets by Direct Combustion-Infrared Detection Method |
ASTM D 6884 : 2003 : R2015 : EDT 1 | Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems (Withdrawn 2024) |
ISO 21613:2015 | (U, Pu)O2 Powders and sintered pellets — Determination of chlorine and fluorine |
ASTM C 758 : 2004 : R2010 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal |
ASTM C 1817 : 2016 : REDLINE | Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O<inf>2</inf>) Pellets by Gravimetry |
I.S. EN ISO 21613:2017 | (U, PU)O2 POWDERS AND SINTERED PELLETS - DETERMINATION OF CHLORINE AND FLUORINE (ISO 21613:2015) |
EN ISO 21613:2017 | (U, Pu)O2 Powders and sintered pellets - Determination of chlorine and fluorine (ISO 21613:2015) |
ASTM C 1233 : 2015 : REDLINE | Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials |
ASTM C 833 : 2017 : REDLINE | Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors |
ASTM C 1008 : 1999 : R2008 | Standard Specification for Sintered (Uranium-Plutonium) Dioxide<br> Pellets<span class='unicode'>—</span>Fast Reactor Fuel (Withdrawn 2014) |
13/30254322 DC : 0 | BS ISO 21613 - (U, PU)O[2] POWDERS AND SINTERED PELLETS - DETERMINATION OF CHLORINE AND FLUORINE |
ASTM C 1307 : 2015 : REDLINE | Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry |
ASTM D 6884 : 2003 | Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems |
ASTM C 1816 : 2016 : REDLINE | Standard Practice for The Ion Exchange Separation of Small Volume Samples Containing Uranium, Americium, and Plutonium Prior to Isotopic Abundance and Content Analysis |
ANSI N15.35 : 1983 | NONDESTRUCTIVE ASSAY BY COUNTING PASSIVE GAMMA RAYS, GUIDE TO PREPARING CALIBRATION MATERIAL FOR, |
ASTM C 1411 : 2014 : REDLINE | Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis |
ASTM C 1008 : 1999 | Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets-Fast Reactor Fuel |
ASTM C 1682 : 2017 : REDLINE | Standard Guide for Characterization of Spent Nuclear Fuel in Support of Interim Storage, Transportation and Geologic Repository Disposal |
ASTM C 758 : 2004 | Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal |
ASTM C 1233 : 2015 : REDLINE | Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials |
ASTM C 697 : 2016 : REDLINE | Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets |
ASTM C 1625 : 2012 : REDLINE | Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry |
ASTM C 1637 : 2013 : REDLINE | Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis |
ASTM E 116 : 1997 | Standard Practice for Photographic Photometry in Spectrochemical Analysis (Withdrawn 2002) |
ASTM C 833 : 2017 : REDLINE | Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors |
ASTM C 1672 : 2017 : REDLINE | Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer |
ASTM C 1817 : 2016 : REDLINE | Standard Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxide ((U, Pu)O<inf>2</inf>) Pellets by Gravimetry |
ASTM C 1432 : 2015 : REDLINE | Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis |
ASTM C 1068 : 2015 : REDLINE | Standard Guide for Qualification of Measurement Methods by a Laboratory Within the Nuclear Industry |
ASTM C 1168 : 2015 : REDLINE | Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis |
ASTM C 1204 : 2014 : REDLINE | Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration |
ASTM E 115 : 1997 | Standard Practice for Photographic Processing in Optical Emission Spectrographic Analysis (Withdrawn 2002) |
ASTM C 1268 : 2015 : REDLINE | Standard Test Method for Quantitative Determination of <sup>241</sup>Am in Plutonium by Gamma-Ray Spectrometry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.