ASTM C 702 : 1998
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Reducing Samples of Aggregate to Testing Size
Available format(s)
Hardcopy , PDF
Superseded date
11-11-2014
Superseded by
Language(s)
English
Published date
10-05-1998
Important note : Users cannot be edited or removed once added to your Multi user PDF.CONTAINED IN VOL. 04.02, 2010 Outlines three methods for the reduction of field samples of aggregate to a suitable size for testing employing techniques that minimize variations in measured characteristics between the test and the field sample.
| Committee |
C 09
|
| DocumentType |
Standard Practice
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This practice describes three methods for the reduction of large samples of aggregate to the appropriate size for testing employing techniques that are intended to minimize variations in measured characteristics between the test samples so selected and the large sample.
1.2 The values stated in SI units are to be regarded as the standard.
1.3 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| Standards | Relationship |
| AASHTO T 248 : 2014 | Corresponds |
| ASTM C 40 : 2004 | Standard Test Method for Organic Impurities in Fine Aggregates for Concrete |
| ASTM E 701 : 1980 : R2010 | Standard Test Methods for Municipal Ferrous Scrap |
| ASTM C 136/C136M : 2014 : REDLINE | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM C 778 : 2017 : REDLINE | Standard Specification for Standard Sand |
| ASTM D 546 : 2017 : REDLINE | Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures |
| ASTM E 889 : 1982 : R2004 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
| ASTM C 1252 : 2017 | Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading) |
| ASTM D 6704 : 2008 : R2015 | Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
| ASTM C 136 : 2006 | Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates |
| ASTM D 1140 : 2017 : REDLINE | Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing |
| ASTM E 889 : 1982 : R2014 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
| ASTM D 5081/D5081M : 1990 : R2011 : EDT 1 | Standard Test Method for Aggregate Layer Hiding Power |
| ASME AG-1 : 2019 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| ASME AG 1 : 2012 | CODE ON NUCLEAR AIR AND GAS TREATMENT |
| ASTM E 701 : 1980 : R1999 | Standard Test Methods for Municipal Ferrous Scrap |
| ASTM D 2419 : 2014 : REDLINE | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM E 688 : 1994 : R2011 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019) |
| AASHTO TP 110 : 2014 | METHOD OF TEST FOR POTENTIAL ALKALI REACTIVITY OF AGGREGATES AND EFFECTIVENESS OF ASR MITIGATION MEASURES (MINIATURE CONCRETE PRISM TEST, MCPT) |
| ASTM D 6913 : 2004 : R2009 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 5821 : 2013 : R2017 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM D 3397 : 1981 | Method of Test for Triaxial Classification of Base Materials, S Oils and Soil (Withdrawn 1987) |
| ASTM C 330 : 2005 | Standard Specification for Lightweight Aggregates for Structural Concrete |
| ASTM C 1137 : 2005 | Standard Test Method for Degradation of Fine Aggregate Due to Attrition (Withdrawn 2011) |
| ASTM C 928 : 2005 | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ASTM C 117 : 2017 : REDLINE | Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing |
| ASTM C 1105 : 2008 : REV A : R2016 | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM C 127 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate (Withdrawn 2024) |
| ASTM C 1107 : 2007 | SPECIFICATION FOR PACKAGED DRY, HYDRAULIC-CEMENT GROUT (NONSHRINK) |
| ASTM E 688 : 1994 : R2006 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
| ASTM D 8038 : 2016 | Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material |
| ASTM E 889 : 1982 : R1996 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
| ASTM D 5680 : 2014 : REDLINE | Standard Practice for Sampling Unconsolidated Solids in Drums or Similar Containers |
| ASTM E 701 : 1980 : R2018 | Standard Test Methods for Municipal Ferrous Scrap |
| ASTM D 6323 : 2012 : EDT 1 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities (Withdrawn 2018) |
| ASTM C 1105 : 2008 | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM D 6913/D6913M : 2017 : REDLINE | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM C 1293 : 2008 : REV B : R2015 | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| TAPPI T 605 : OM 92 | REDUCING A GROSS SAMPLE OF GRANULAR OR AGGREGATE MATERIAL TO TESTING SIZE |
| MIL-A-22262 Revision B:1993 | ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING |
| ASTM C 387/C387M : 2017 : REDLINE | Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar |
| ASTM D 1074 : 2017 : REDLINE | Standard Test Method for Compressive Strength of Asphalt Mixtures |
| ASTM D 7370/D7370M : 2014 : REDLINE | Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion |
| AASHTO T 96 : 2002 | METHOD OF TEST FOR RESISTANCE TO DEGRADATION OF SMALL-SIZE COARSE AGGREGATE BY ABRASION AND IMPACT IN THE LOS ANGELES MACHINE |
| AASHTO T 96:2002(R2019) | Standard Method of Test for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| ASTM D 6913 : 2004 : EDT 2 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 6913 : 2004 : R2009 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 5081 : 1990 : R1999 : EDT 1 | Standard Test Method for Aggregate Layer Hiding Power |
| ASTM C 1293 : 2008 : REV A | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| ASTM C 331/C331M : 2017 : REDLINE | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM D 5081 : 1990 : R2005 | Standard Test Method for Aggregate Layer Hiding Power |
| ASTM C 928/C928M : 2013 : REDLINE | Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs |
| ASTM C 1105 : 2008 : REV A | Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction |
| ASTM E 889 : 1982 : R2009 | Standard Test Method for Composition or Purity of a Solid Waste Materials Stream |
| ASTM D 7172 : 2014 : REDLINE | Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared |
| ASTM D 5711 : 2003 | Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Withdrawn 2012) |
| ASTM C 1293 : 2008 : REV B | Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction |
| ASTM C 87 : 2005 | Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar |
| ASTM D 6913 : 2004 : EDT 1 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| ASTM D 6323 : 2012 | Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities |
| ASTM E 701 : 1980 : R2005 | Standard Test Methods for Municipal Ferrous Scrap |
| ASTM D 5821 : 2013 | Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate |
| ASTM D 2940 : 2003 | Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports |
| AASHTO T 168 : 2003 | METHOD OF TEST FOR SAMPLING BITUMINOUS PAVING MIXTURES |
| ASTM D 2487 : 2017 : REDLINE | Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System) |
| ASTM D 5679 : 2016 : REDLINE | Standard Practice for Sampling Consolidated Solids in Drums or Similar Containers |
| ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
| ASTM D 4943 : 2008-07 | TEST METHOD FOR SHRINKAGE FACTORS OF SOILS BY THE WAX METHOD |
| ASTM D 6913 : 2004 | Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis |
| AWWA B102:2015 | MANGANESE GREENSAND FOR FILTERS |
| ASTM E 688 : 1994 : R1999 | Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing |
| ASTM C 123/C123M : 2014 : REDLINE | Standard Test Method for Lightweight Particles in Aggregate (Withdrawn 2023) |
| ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| ASTM D 6051 : 2015 | Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities |
| ASTM D 75/D75M : 2014 : REDLINE | Standard Practice for Sampling Aggregates |
| ASTM C 331 : 2005 | Standard Specification for Lightweight Aggregates for Concrete Masonry Units |
| ASTM C 88 : 2013-08 | TEST METHOD FOR SOUNDNESS OF AGGREGATES BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
| ASTM C 123 : 2004 | Standard Test Method for Lightweight Particles in Aggregate |
| ASTM D 6704 : 2008 | Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material |
| ASTM C 131/C131M : 2014 : REDLINE | Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| SSPC-AB 1 : 2015 | MINERAL AND SLAG ABRASIVES |
| ASTM D 75 : 2003 | Standard Practice for Sampling Aggregates |
| ASTM C 128 : 2015 : REDLINE | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.