ASTM C 877M : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
Available format(s)
Hardcopy , PDF
Superseded date
02-02-2021
Superseded by
Language(s)
English
Published date
31-01-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
C 13
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification covers external sealing bands to be used in conjunction with concrete pipe as defined in Terminology C822 and conforming to Specifications C14M, C76M, C412M, C478M, C506M, C507M, C655M, C985M, C1417M, and C1433M.
1.1.1Type I, Rubber and Mastic Bands.
1.1.2Type II, Plastic Film and Mesh Reinforced Mastic Bands.
1.1.3Type III, Chemically Bonded Adhesive Butyl Bands.
1.2This specification is the metric counterpart of Specification C877.
Note 1:This specification covers only the design and material of the sealing bands. Sealing bands covered by this specification are adequate, when properly installed, for external hydrostatic pressures up to 90 kPa, (9.14 m) without leakage. The amount of infiltration or exfiltration flow in an installed pipeline is dependent upon many factors other than the sealing bands; allowable quantities and suitable testing of the installed pipeline and system must be covered by other specifications.
| ASTM D 3953 : 2006 | Standard Specification for Strapping, Flat Steel and Seal |
| ASTM D 2240 : 2000 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1417M : 2014 : EDT 1 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1417M : 2004 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2013 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1417M : 2014 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2007 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1417M : 2000 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2008 : REV A | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 1171 : 1999 | Standard Test Method for Rubber Deterioration-Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) |
| ASTM D 1171 : 2016 | Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens) |
| ASTM C 1417M : 2013 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2000 : REV A | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric] |
| ASTM D 3953 : 2007 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1433M : 2014 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 1278 : 1991 : REV A : R2002 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 1171 : 1999 : R2007 | Standard Test Method for Rubber Deterioration<span class='unicode'>—</span>Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) |
| ASTM D 3953 : 1991 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 1278 : 1991 : REV A : R1997 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 1171 : 2015 | Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens) |
| ASTM D 3953 : 2012 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1417M : 2008 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM D 3953 : 2015 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1417M : 2012 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2006 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2202 : 2000 : R2010 | Standard Test Method for Slump of Sealants |
| ASTM D 2240 : 2004 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1417M : 2015 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1417M : 2011 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1433M : 2008 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2007 : REV A | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2016 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2202 : 2000 : R2006 | Standard Test Method for Slump of Sealants |
| ASTM C 1417M : 2003 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM C 1417M : 2013 : REV A | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM D 3953 : 2005 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 1278 : 1991 : REV A : R2015 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 2202 : 2000 | Standard Test Method for Slump of Sealants |
| ASTM C 1433M : 2001 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2240 : 2004 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1278 : 1991 : REV A : R2011 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM C 1433M : 2016 : REV B | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2009 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2004 : EDT 1 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2010 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 3953 : 2007 : REV A | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1433M : 2002 : REV A | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 1278 : 1991 : REV A : R2002 : EDT 1 | Standard Test Methods for Rubber from Natural Sources-Chemical Analysis |
| ASTM D 2202 : 2000 : R2014 | Standard Test Method for Slump of Sealants |
| ASTM D 2240 : 2002 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1417M : 2019 | Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric) |
| ASTM D 2240 : 2015 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 2240 : 2003 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM C 1433M : 2013 : REV B | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2240 : 2002 : REV B | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1278 : 1991 : REV A : R2020 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM C 1433M : 2004 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2018 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2019 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2240 : 2015 : EDT 1 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1171 : 2016 : EDT 1 | Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens) |
| ASTM D 3953 : 2002 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1433M : 2016 : REV A | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 1278 : 1991 : REV A : R2007 | Standard Test Methods for Rubber from Natural Sources—Chemical Analysis |
| ASTM D 2240 : 2005 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3953 : 2013 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM D 2240 : 2005 : R2010 | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 1171 : 2018 | Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors (Triangular Specimens) |
| ASTM D 1963 : 1985 : R1996 | Standard Test Method for Specific Gravity of Drying Oils, Varnishes, Resins, and Related Materials at 25/25°C (Withdrawn 2004) |
| ASTM D 2202 : 2000 : R2019 | Standard Test Method for Slump of Sealants |
| ASTM C 1433M : 2013 : REV A | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM D 2240 : 2002 : REV A | Standard Test Method for Rubber Property—Durometer Hardness |
| ASTM D 3953 : 1997 | Standard Specification for Strapping, Flat Steel and Seals |
| ASTM C 1433M : 2002 | Standard Specification for Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
| ASTM C 1433M : 2015 | Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.