ASTM C 889 : 2018
Current
The latest, up-to-date edition.
Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder
Hardcopy , PDF
English
01-02-2018
Committee |
C 26
|
DocumentType |
Test Method
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1These test methods cover procedures for the chemical and mass spectrometric analysis of nuclear-grade gadolinium oxide powders to determine compliance with specifications.
1.2The analytical procedures appear in the following order:
Sections | |
Carbon by Direct Combustion—Thermal Conductivity | 2 |
C1408 Test Method for Carbon (Total) in Uranium Oxide | 3 |
Total Chlorine and Fluorine by Pyrohydrolysis Ion— | 4 |
C1502 Test Method for Determination of Total Chlorine and | 3 |
Loss of Weight on Ignition | 8 – 14 |
Sulfur by Combustion—Iodometric Titration | 5 |
Impurity Elements by a Spark-Source Mass Spectrographic | |
C761 Test Methods for Chemical, Mass Spectrometric, | 3 |
C1287 Test Method for Determination of Impurities in | 3 |
Gadolinium Content in Gadolinium Oxide by Impurity | 15 – 18 |
1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Section 6.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 1193 : 2024 | Standard Specification for Reagent Water |
ASTM C 1408 : 1998 | Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method |
ASTM C 859 : 2023 | Standard Terminology Relating to Nuclear Materials |
ASTM C 1408 : 2024 | Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method |
ASTM C 859 : 2014 : REV B | Standard Terminology Relating to Nuclear Materials |
ASTM C 859 : 2024 | Standard Terminology Relating to Nuclear Materials |
ASTM D 1193 : 1977 : R1983 : EDT 1 | Standard Specification for Reagent Water |
ASTM C 1287 : 2010 | Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry |
ASTM C 1287 : 2018 | Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry |
ASTM C 1408 : 2009 | Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method |
ASTM D 1193 : 2006 : R2011 | Standard Specification for Reagent Water |
ASTM C 1408 : 2016 | Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method |
ASTM C 859 : 2022 | Standard Terminology Relating to Nuclear Materials |
ASTM C 859 : 2022 : REV A | Standard Terminology Relating to Nuclear Materials |
ASTM C 1502 : 2001 | Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide |
ASTM D 1193 : 1991 | Standard Specification for Reagent Water |
ASTM C 1502 : 2016 | Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide |
ASTM C 1287 : 1995 | Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma Mass Spectrometry |
ASTM C 1502 : 2009 | Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide |
ASTM D 1193 : 1970 | Standard Specification For Reagent Water |
ASTM D 1193 : 2006 | Standard Specification for Reagent Water |
ASTM C 1287 : 2003 | Standard Test Method for Determination of Impurities in Uranium Dioxide by Inductively Coupled Plasma Mass Spectrometry |
ASTM D 1193 : 1999 | Standard Specification for Reagent Water |
ASTM C 1502 : 2024 | Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide |
ASTM D 1193 : 2006 : R2018 | Standard Specification for Reagent Water |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.