Skip to content
Please enter a keyword to search

  • ASTM C 921 : 2010 : R2015

    Current The latest, up-to-date edition.

    Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation (Withdrawn 2021)

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  23-10-2015

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 04.06, 2015 Describes jackets applied over thermal insulation on piping and equipment, including materials applied solely for physical protection, and materials applied as vapor retarders.

    Scope - (Show below) - (Hide below)

    1.1This practice covers jackets applied over thermal insulation on piping and equipment, including materials applied solely for physical protection, and materials applied as vapor retarders.

    1.2This practice provides material and physical requirements, or both, for jackets. Guidance in selecting the proper jacket for a given application can be found in Guide C1423.

    1.3This practice does not cover field applied mastics or barrier coatings and their attendant reinforcements, nor does it cover jackets for buried insulation systems.

    1.4The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

    1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee C 16
    Document Type Standard Practice
    Product Note Reconfirmed 2015
    Publisher American Society for Testing and Materials
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    ASTM C 755 : 2020 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
    ASTM C 1126 : 2019 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
    ASTM C 547 : 2019 Standard Specification for Mineral Fiber Pipe Insulation
    ASTM C 612 : 2014(R2019) Standard Specification for Mineral Fiber Block and Board Thermal Insulation
    ASTM C 553 : 2013(R2019) Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
    ASTM C 1393 : 2019 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
    ASTM C 1423 : 2021 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    ASTM C 592 : 2016 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 96/E96M : 2016 : REDLINE Standard Test Methods for Water Vapor Transmission of Materials
    ASTM C 1423 : 1998 : R2003 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    ASTM A 653/A653M : 2001 : REV A Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
    ASTM D 1204 : 2014 : REDLINE Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM D 1204 : 2007 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM C 1263 : 1995 : R2015 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
    ASTM A 240/A240M : 2011 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM D 1204 : 2014 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM B 209 : 2014 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
    ASTM C 1263 : 1995 : R2005 : EDT 1 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
    ASTM C 1338 : 2000 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
    ASTM A 240/A240M : 2005 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
    ASTM A 792/A792M : 2009 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
    ASTM A 653/A653M : 2020 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
    ASTM D 1204 : 2008 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM C 1423 : 2021 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    ASTM C 1338 : 2014 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
    ASTM E 84 : 2021 Standard Test Method for Surface Burning Characteristics of Building Materials
    ASTM D 774/D774M : 1997 Standard Test Method for Bursting Strength of Paper
    ASTM C 1263 : 1995 : R2010 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
    ASTM D 1204 : 2014 : R2020 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM A 336/A336M : 2019 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
    ASTM C 1338 : 2019 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
    ASTM C 1338 : 2008 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
    ASTM D 828 : 2016 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus
    ASTM E 84 : 2020 Standard Test Method for Surface Burning Characteristics of Building Materials
    ASTM E 84 : 2021 : REV A Standard Test Method for Surface Burning Characteristics of Building Materials
    ASTM C 1423 : 2016 : REDLINE Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    ASTM C 1423 : 2015 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    ASTM C 1258 : 1994 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
    ASTM C 1423 : 1998 : R2011 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    ASTM C 1423 : 2016 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
    ASTM A 792/A792M : 2010 : R2015 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
    ASTM C 1263 : 1995 : R2005 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
    ASTM C 1258 : 2008 : R2013 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
    ASTM C 1258 : 2019 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
    ASTM D 1204 : 1994 : EDT 1 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM A 792/A792M : 2021 : REV A Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
    ASTM C 1258 : 2021 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
    ASTM C 1263 : 1995 : R2000 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
    ASTM C 1263 : 1995. Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
    ASTM A 792/A792M : 2021 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
    ASTM C 1263 : 1995 : R2021 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
    ASTM C 1423 : 2014 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    ASTM D 1204 : 2002 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    ASTM A 336/A336M : 2021 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
    ASTM C 1258 : 2008 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
    ASTM C 1423 : 2015 : REV A Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    ASTM C 1423 : 1998 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
    TAPPI T 461 : 2009 FLAME RESISTANCE OF TREATED PAPER AND PAPERBOARD
    ASTM C 168 : 2017-06 TERMINOLOGY RELATING TO THERMAL INSULATION
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective