ASTM C 94/C94M : 2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Ready-Mixed Concrete
Hardcopy , PDF
10-04-2021
English
14-04-2020
Committee |
C 09
|
DocumentType |
Standard
|
Pages |
15
|
ProductNote |
This standard is also refers to NIST 105-1.
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers ready-mixed concrete as defined in 3.2.2 (Note 1). Requirements for quality of ready-mixed concrete shall be either as stated in this specification or as ordered by the purchaser. When the purchaser’s requirements, as stated in the order, differ from those in this specification, the purchaser’s requirements shall govern. This specification does not cover the placement, consolidation, curing, or protection of the concrete after delivery to the purchaser.
Note 1:Concrete produced by volumetric batching and continuous mixing is covered in Specification C685/C685M. Fiber-reinforced concrete is covered in Specification C1116/C1116M.
1.2As used throughout this specification the manufacturer produces ready-mixed concrete. The purchaser buys ready-mixed concrete.
1.3The values stated in either SI units, shown in brackets, or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4The text of this specification references notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. (Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged use.2)
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 1613 : 2017 | Standard Specification for Precast Concrete Grease Interceptor Tanks |
ASTM C 858 : 2019 | Standard Specification for Underground Precast Concrete Utility Structures |
ASTM C 913 : 2018 | Standard Specification for Precast Concrete Water and Wastewater Structures |
ASTM C 935 : 2019 | Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast |
ASTM C 1602/C1602M : 2018 | Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete |
ASTM F 1668 : 2016 | Standard Guide for Construction Procedures for Buried Plastic Pipe |
ASTM C 125 : 2020 | Standard Terminology Relating to Concrete and Concrete Aggregates |
ASTM C 1798/C1798M : 2019 | Standard Specification for Returned Fresh Concrete for Use in a New Batch of Ready-Mixed Concrete |
ASTM C 1776/C1776M : 2017 | Standard Specification for Wet-Cast Precast Modular Retaining Wall Units |
ASTM C 1227 : 2020 | Standard Specification for Precast Concrete Septic Tanks |
ASTM F 2480 : 2018 | Standard Guide for In-ground Concrete Skatepark |
ASTM D 6449 : 1999 : R2015 : EDT 1 | Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method) (Withdrawn 2024) |
ASTM D 7853 : 2013 : R2020 | Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete |
ASTM F 1090 : 2015 | Standard Classification for Bank and Mercantile Vault Construction |
ASTM C 915 : 1979 : R2018 | Standard Specification for Precast Reinforced Concrete Crib Wall Members |
ACI PRC 506.5:2022 | Specifying Underground Shotcrete - Guide |
ASTM C 31/C31M : 2019 : REV A | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 173/C173M : 2009 | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
ASTM C 1240 : 2010 | Standard Specification for Silica Fume Used in Cementitious Mixtures |
ASTM C 39/C39M : 2021 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 1157/C1157M : 2020 | Standard Performance Specification for Hydraulic Cement |
ASTM C 39/C39M : 2020 | Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens |
ASTM C 1157/C1157M : 2020 : REV A | Standard Performance Specification for Hydraulic Cement |
ASTM C 31/C31M : 2021 | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
ASTM C 494/C494M : 2010 | Standard Specification for Chemical Admixtures for Concrete |
ASTM C 125 : 2009 | Standard Terminology Relating to Concrete and Concrete Aggregates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.