ASTM D 1078 : 2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Distillation Range of Volatile Organic Liquids
Hardcopy , PDF
11-11-2014
English
15-05-2005
Committee |
D 01
|
DocumentType |
Test Method
|
Pages |
9
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1 This test method covers the determination of the distillation range of liquids boiling between 30 and 350C, that are chemically stable during the distillation process, by manual or automatic distillation procedures.
1.2 This test method is applicable to organic liquids such as hydrocarbons, oxygenated compounds, chemical intermediates, and blends thereof.
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 For purposes of determining conformance of an observed or a calculated value using this test method to relevant specifications, test result(s) shall be rounded off "to the nearest unit" in the last right-hand digit used in expressing the specification limit, in accordance with the rounding-off method of Practice E 29.
1.5 For hazard information and guidance, see the supplier's Material Safety Data Sheet.
1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements are given in Section 7.
ASTM D 4615 : 2012 | Standard Specification for n-Butyl Acetate (All Grades) (Withdrawn 2021) |
ASTM D 4837 : 2007 : R2012 | Standard Specification for Propylene Glycol Monomethyl Ether (Withdrawn 2021) |
ASTM E 2470 : 2009 : R2015 : EDT 1 | Standard Specification for Polyester Grade Ethylene Glycol |
ASTM D 4836 : 2009 : R2017 | Standard Specification for Dipropylene Glycol Monomethyl Ether |
ASTM D 7670 : 2010 : R2017 | Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters |
ASTM D 4835 : 2008 : R2012 | Standard Specification for Propylene Glycol Monomethyl Ether Acetate (Withdrawn 2021) |
ASTM F 311 : 2008 : R2013 | Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters |
ASTM D 2627 : 2008 : R2012 | Standard Specification for Diacetone Alcohol (Withdrawn 2021) |
ASTM D 4079 : 2000 : R2016 | Standard Specification for Vapor-Degreasing Grade Methylene Chloride |
ASTM D 2636 : 2007 : R2012 | Standard Specification for Hexylene Glycol (Withdrawn 2021) |
ASTM D 2916 : 2009 : R2017 | Standard Specification for Isophorone |
ASTM D 3540 : 2012 | Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade) (Withdrawn 2021) |
ASTM D 3278 : 1996 : R2011 | Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus (Withdrawn 2020) |
ASTM D 3728 : 2008 : R2012 | Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade) (Withdrawn 2021) |
ASTM D 4995 : 2010 : R2015 | Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent |
ASTM D 1718 : 2009 : R2017 | Standard Specification for Isobutyl Acetate (95 % Grade) |
ASTM D 3131 : 2007 : R2013 | Standard Specification for Isopropyl Acetate (99 % Grade) |
ASTM E 1119 : 2009 : R2015 : EDT 1 | Standard Specification for Industrial Grade Ethylene Glycol |
ASTM E 133 : 1992 : R2016 | Standard Specification for Distillation Equipment |
ASTM D 329 : 2007 : R2013 | Standard Specification for Acetone |
ASTM D 4171 : 2016 : REV A | Standard Specification for Fuel System Icing Inhibitors |
ASTM D 1153 : 2012 | Standard Specification for Methyl Isobutyl Ketone (Withdrawn 2021) |
ASTM D 1310 : 2014 | Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus |
ASTM E 1405 : 1998 : R2016 | Standard Specification for Laboratory Glass Distillation Flasks |
ASTM D 1093 : 2011 : R2017 | Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues |
ASTM D 2190 : 2007 : R2013 | Standard Specification for Vinyl Acetate |
ASTM D 1836 : 2007 : R2013 | Standard Specification for Commercial Hexanes |
ASTM D 3585 : 2008 : R2013 | Standard Specification for ASTM Reference Fluid for Coolant Tests |
ASTM D 1133 : 2013 | Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents |
ASTM D 3128 : 2007 : R2013 | Standard Specification for 2-Methoxyethanol |
ASTM D 330 : 2007 : R2013 | Standard Specification for 2-Butoxyethanol |
ASTM D 2634 : 2007 : R2013 | Standard Specification for Methyl Amyl Acetate (95 % Grade) |
ASTM D 5137 : 2007 : R2013 | Standard Specification for Hexyl Acetate |
ASTM D 2917 : 2007 : R2013 | Standard Specification for Methyl Isoamyl Ketone |
ASTM D 5399 : 2009 : R2017 | Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography |
ASTM D 268 : 2001 : R2012 | Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material (Withdrawn 2021) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.