• Shopping Cart
    There are no items in your cart

ASTM D 1141 : 1998 : R2021

Current

Current

The latest, up-to-date edition.

Standard Practice for Preparation of Substitute Ocean Water

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

16-07-2021

€49.35
Excluding VAT

Committee
D 19
DocumentType
Standard Practice
Pages
3
PublisherName
American Society for Testing and Materials
Status
Current
Supersedes

1.1This practice covers the preparation of solutions containing inorganic salts in proportions and concentrations representative of ocean water.2

Note 1:Since the concentrations of ocean water varies with sampling location, the gross concentration employed herein is an average of many reliable individual analyses. Trace elements, occurring naturally in concentrations below 0.005 mg/L, are not included.

1.2This practice provides three stock solutions, each relatively concentrated but stable in storage. For preparation of substitute ocean water, aliquots of the first two stock solutions with added salt are combined in larger volume. An added refinement in adjustment of heavy metal concentration is provided by the addition of a small aliquot of the third stock solution to the previous solution.

1.3The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM G 205 : 2016 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
ASTM G 208 : 2012 : R2020 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
ASTM D 3867 : 2016 Standard Test Methods for Nitrite-Nitrate in Water
ASTM D 8193 : 2018 Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
ASTM D 2777 : 2013 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM G 85 : 2019 Standard Practice for Modified Salt Spray (Fog) Testing
ASTM G 184 : 2006 : R2020 : EDT 1 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
ASTM D 1183 : 2003 : R2019 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
ASTM D 5847 : 2002 : R2020 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM G 185 : 2006 : R2020 : EDT 1 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM D 7781 : 2014 Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase (Withdrawn 2023)
ASTM G 170 : 2006 : R2020 : EDT 1 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
ASTM D 7258 : 2017 Standard Specification for Polymeric Piles
ASTM E 3078/E3078M : 2020 : EDT 1 Standard Practice for Conditioning of Hard Armor Test Items
ASTM D 6903 : 2007 : R2020 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
ASTM F 1511 : 2018 Standard Specification for Mechanical Seals for Shipboard Pump Applications
ASTM G 202 : 2012 : R2020 Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G 39 : 1999 : R2021 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM E 1681 : 2003 : R2020 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
ASTM E 1597 : 2010 : R2019 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
ASTM G 44 : 2021 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution
ASTM D 5905 : 1998 : R2018 Standard Practice for the Preparation of Substitute Wastewater
ASTM D 6442 : 2006 : R2020 Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
ASTM D 1401 : 2019 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
ASTM G 41 : 1990 : R2018 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
NACE TM0190:2017(R2022) Impressed Current Laboratory Testing of Aluminum and Zinc Alloy Anodes

ASTM D 1129 : 2013 : R2020 Standard Terminology Relating to Water
ASTM D 1129 : 2013 : R2020 : EDT 2 Standard Terminology Relating to Water
ASTM D 1129 : 2013 : R2020 : EDT 1 Standard Terminology Relating to Water
ASTM E 200 : 2016 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
ASTM E 200 : 2023 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.