ASTM D 1176 : 1998 : R2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
Hardcopy , PDF
11-11-2014
English
01-04-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.| Committee |
D 15
|
| DocumentType |
Standard Practice
|
| Pages |
3
|
| ProductNote |
Reconfirmed 2008
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1 This practice covers information on sampling and preparing solutions of engine coolants and antirusts (Notes 1 and 2).
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are approximate equivalents given for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Note 1—Antirust as referred to in this practice covers products intended for use in automotive/light-duty and heavy-duty applications in which water is used as the cooling medium. Note 2—Antirust products are available in liquid and solid form. Solids should be handled as outlined in Annex A1.
| ASTM D 7736 : 2019 | Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol |
| ASTM D 1881 : 2017 | Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware |
| ASTM D 7820 : 2012 | Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel |
| ASTM D 2809 : 2009 : R2017 | Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants |
| ASTM D 7934/D7934M : 2014 | Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions (Withdrawn 2023) |
| ASTM D 7304 : 2016 | Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC |
| ASTM D 6107 : 1997 : R2017 | Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service |
| ASTM D 1882 : 2017 | Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles |
| ASTM D 1123 : 1999 : R2015 | Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method |
| ASTM D 6130 : 2011 : R2018 | Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy |
| ASTM D 7437 : 2008 : R2013 | Standard Test Method for Temperature and Hard Water Stability of Engine Coolants |
| ASTM D 1121 : 2011 | Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts |
| ASTM D 1287 : 2011 | Standard Test Method for pH of Engine Coolants and Antirusts |
| ASTM D 7896 : 2019 | Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method |
| ASTM D 1384 : 2005 : R2012 | Standard Test Method for Corrosion Test for Engine Coolants in Glassware |
| ASTM D 2570 : 2016 | Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants |
| ASTM D 4340 : 2019 | Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions |
| ASTM D 4921 : 1995 : R2012 | Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature |
| ASTM D 3147 : 2006 : R2013 | Standard Test Method for Testing Stop-Leak Additives for Engine Coolants |
| ASTM D 3634 : 1999 : R2015 | Standard Test Method for Trace Chloride Ion in Engine Coolants |
| ASTM D 6660 : 2001 : R2019 | Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method |
| ASTM D 7935/D7935M : 2014 | Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware |
| ASTM D 6129 : 1997 : R2015 | Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy |
| ASTM D 7933 : 2015 | Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers |
| ASTM D 1122 : 2016 : R2017 : EDT 1 | Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer |
| ASTM D 3585 : 2008 : R2013 | Standard Specification for ASTM Reference Fluid for Coolant Tests |
| ASTM D 1120 : 2017 | Standard Test Method for Boiling Point of Engine Coolants |
| ASTM D 5827 : 2009 : R2015 | Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography |
| ASTM D 1119 : 2005 : R2015 | Standard Test Method for Percent Ash Content of Engine Coolants |
| ASTM D 1177 : 2017 | Standard Test Method for Freezing Point of Aqueous Engine Coolants |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.