ASTM D 1208 : 1996 : R2019
Current
The latest, up-to-date edition.
Standard Test Methods for Common Properties of Certain Pigments
Hardcopy , PDF
English
01-06-2019
1.1 These test methods cover procedures for determining certain properties of pigments.
Committee |
D 01
|
DocumentType |
Test Method
|
Pages |
3
|
PublisherName |
American Society for Testing and Materials
|
Status |
Current
|
Supersedes |
1.1These test methods cover procedures for determining certain properties of pigments. The procedures appear in the following order:
Dry Pigments | Sections |
Loss on Ignition and Ash | 4 |
Matter Soluble in Water | 5 |
Hydrogen Ion Concentration (pH Value) | 6 |
Alkalinity or Acidity by Titration | 7 and 8 |
Water Content (Distillation Method) | 9 and 10 |
Pigment Pastes in Oil | |
Water Content (Distillation Method) | 9 and 10 |
Pigment Content of Paste in Oil | 11 |
Total Volatile Matter in Paste in Oil | 12 |
1.2The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM D 5146 : 2010 : R2019 | Standard Guide to Testing Solvent-Borne Architectural Coatings |
ASTM D 717 : 1986 : R2014 | Standard Test Methods for Analysis of Magnesium Silicate Pigment |
ASTM D 5377 : 1993 : R2017 | Standard Classification for Rubber Compounding Materials—Ground Coal |
ASTM D 3721 : 2005 : R2019 | Standard Specification for Synthetic Red Iron Oxide Pigment |
ASTM D 210 : 2005 : R2019 | Standard Specification for Bone Black Pigment |
ASTM D 763 : 2006 : R2019 | Standard Specification for Raw and Burnt Umber Pigments |
ASTM D 602 : 1981 : R2019 | Standard Specification for Barium Sulfate Pigments |
ASTM D 4677 : 1987 : R2018 | Standard Classification for Rubber Compounding Materials—Titanium Dioxide |
ASTM D 768 : 2001 : R2019 | Standard Specification for Yellow Iron Oxide Hydrated |
ASTM D 715 : 1986 : R2014 | Standard Test Methods for Analysis of Barium Sulfate Pigment |
ASTM D 718 : 1986 : R2014 | Standard Test Methods for Analysis of Aluminum Silicate Pigment |
ASTM D 83 : 1984 : R2014 | Standard Specification for Red Lead Pigment |
ASTM D 283 : 2013 : R2019 | Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments |
ASTM D 6280 : 1998 : R2014 | Standard Specification for Zinc Phosphate Pigments |
ASTM D 209 : 1981 : R2019 | Standard Specification for Lampblack Pigment |
ASTM C 979/C979M : 2016 | Standard Specification for Pigments for Integrally Colored Concrete |
ASTM D 1648 : 1986 : R2014 | Standard Specification for Basic Lead Silicochromate Pigment |
ASTM D 3722 : 2005 : R2019 | Standard Specification for Natural Red and Brown Iron Oxide Pigments |
ASTM D 85 : 2005 : R2019 | Standard Specification for Ochre Pigment |
ASTM D 50 : 1990 : R2019 | Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese |
ASTM D 81 : 1987 : R2014 | Standard Specification for Basic Carbonate White Lead Pigment |
ASTM D 3724 : 2001 : R2012 | Standard Specification for Synthetic Brown Iron Oxide Pigment |
ASTM D 1135 : 1986 : R2014 | Standard Test Methods for Chemical Analysis of Blue Pigments |
ASTM D 765 : 1987 : R2014 | Standard Specification for Raw and Burnt Sienna Pigments |
ASTM D 605 : 1982 : R2019 | Standard Specification for Magnesium Silicate Pigment (Talc) |
ASTM D 607 : 1982 : R2019 | Standard Specification for Wet Ground Mica Pigments |
ASTM D 769 : 2001 : R2019 | Standard Specification for Black Synthetic Iron Oxide |
ASTM D 49 : 1983 : R2014 | Standard Test Methods of Chemical Analysis of Red Lead |
ASTM D 1649 : 2001 : R2012 | Standard Specification for Strontium Chromate Pigment |
ASTM D 280 : 2001 : R2019 | Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments |
ASTM D 95 : 2023 : EDT 1 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation |
ASTM D 1135 : 1986 : R2014 | Standard Test Methods for Chemical Analysis of Blue Pigments |
ASTM D 1135 : 1986 : R2020 | Standard Test Methods for Chemical Analysis of Blue Pigments |
ASTM E 70 : 2019 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
ASTM D 1135 : 1986 : R2004 | Standard Test Methods for Chemical Analysis of Blue Pigments |
ASTM D 95 : 2013 : R2018 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation |
ASTM D 1135 : 1986 : R1999 | Standard Test Methods for Chemical Analysis of Blue Pigments |
ASTM D 280 : 2001 : R2023 | Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments |
ASTM D 1135 : 1986 : R2009 | Standard Test Methods for Chemical Analysis of Blue Pigments |
ASTM E 70 : 2024 | Standard Test Method for pH of Aqueous Solutions With the Glass Electrode |
ASTM D 95 : 2023 | Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.