• Shopping Cart
    There are no items in your cart

ASTM D 1246 : 2016

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Test Method for Bromide Ion in Water

Available format(s)

Hardcopy , PDF

Superseded date

06-01-2022

Language(s)

English

Published date

24-06-2016

€67.30
Excluding VAT

Committee
D 19
DocumentType
Test Method
Pages
5
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This test method is applicable to the measurement of bromide ion in water, ground water, and drinking water.

1.2Samples containing 0.5 mg/L to 1000 mg/L of bromide may be analyzed by this test method. The concentration range may be extended by the dilution of an appropriate aliquot.

1.3The precision and bias statements were determined on natural and ground waters. It is the responsibility of the analyst to assure the validity of this test method for untested matrices.

1.4A titrimetric and two colorimetric test methods for iodide and bromide were discontinued. Refer to Appendix X1 for historical information.

1.5The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.6This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

ASTM D 8006 : 2016 Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
ASTM F 2191/F2191M : 2013 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
ASTM F 2168 : 2013 Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
ASTM F 2191/F2191M : 2013 : R2020 : EDT 1 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
ASTM E 800 : 2020 Standard Guide for Measurement of Gases Present or Generated During Fires
ASTM F 2168 : 2013 : R2019 Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring

ASTM D 5810 : 1996 : R2021 Standard Guide for Spiking into Aqueous Samples
ASTM D 3370 : 1995 : REV A : R2003 : EDT 1 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 2003 Standard Terminology Relating to Water
ASTM D 1129 : 2013 Standard Terminology Relating to Water
ASTM D 1129 : 2013 : R2020 Standard Terminology Relating to Water
ASTM D 5847 : 1999 : REV A : EDT 1 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 4127 : 1992 : R1996 Standard Terminology Used with Ion-Selective Electrodes
ASTM D 5810 : 1996 : R2011 Standard Guide for Spiking into Aqueous Samples
ASTM D 2777 : 2012 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 1193 : 1977 : R1983 : EDT 1 Standard Specification for Reagent Water
ASTM D 5847 : 2002 : R2007 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 5810 : 1996 : R2001 Standard Guide for Spiking into Aqueous Samples
ASTM D 4127 : 2012 Standard Terminology Used with Ion-Selective Electrodes
ASTM D 1129 : 2006 Standard Terminology Relating to Water
ASTM D 2777 : 2003 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM D 1066 : 2018 Standard Practice for Sampling Steam
ASTM D 3370 : 2010 Standard Practices for Sampling Water from Closed Conduits
ASTM D 2777 : 2013 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 1066 : 2006 Standard Practice for Sampling Steam
ASTM D 5847 : 2002 : R2012 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 1066 : 2018 : EDT 1 Standard Practice for Sampling Steam
ASTM D 2777 : 1998 Standard Practice for Determination of Precision and Bias of Applicable Methods of Committee D-19 on Water
ASTM D 3370 : 2008 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 1999 : REV A Standard Terminology Relating to Water
ASTM D 1129 : 2006 : REV A Standard Terminology Relating to Water
ASTM D 1193 : 2006 : R2011 Standard Specification for Reagent Water
ASTM D 5847 : 2002 : R2020 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 1129 : 2003 : REV A Standard Terminology Relating to Water
ASTM D 1129 : 2002 Standard Terminology Relating to Water
ASTM D 4127 : 2006 Standard Terminology Used with Ion-Selective Electrodes
ASTM D 1066 : 1997 : R2001 Standard Practice for Sampling Steam
ASTM D 5810 : 1996 : R2006 Standard Guide for Spiking into Aqueous Samples
ASTM D 4127 : 2018 Standard Terminology Used with Ion-Selective Electrodes
ASTM D 1193 : 1991 Standard Specification for Reagent Water
ASTM D 1066 : 2011 Standard Practice for Sampling Steam
ASTM D 1129 : 2004 Standard Terminology Relating to Water
ASTM D 2777 : 2008 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 2777 : 2006 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 3370 : 2018 Standard Practices for Sampling Water from Flowing Process Streams
ASTM D 1129 : 2002 : REV A Standard Terminology Relating to Water
ASTM D 5847 : 2002 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
ASTM D 3370 : 1976 Standard Practices for Sampling Water
ASTM D 1193 : 1970 Standard Specification For Reagent Water
ASTM D 1193 : 2006 Standard Specification for Reagent Water
ASTM D 3370 : 1995 : REV A : R1999 : EDT 1 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1193 : 1999 Standard Specification for Reagent Water
ASTM D 1129 : 2010 Standard Terminology Relating to Water
ASTM D 5810 : 1996 Standard Guide for Spiking into Aqueous Samples
ASTM D 3370 : 2007 Standard Practices for Sampling Water from Closed Conduits
ASTM D 1129 : 2006 : REV A : EDT 1 Standard Terminology Relating to Water
ASTM D 1129 : 2001 Standard Terminology Relating to Water
ASTM D 1129 : 2004 : EDT 1 Standard Terminology Relating to Water
ASTM D 4127 : 2002 Standard Terminology Used with Ion-Selective Electrodes
ASTM D 4127 : 2018 : REV A Standard Terminology Used with Ion-Selective Electrodes
ASTM D 1193 : 2006 : R2018 Standard Specification for Reagent Water
ASTM D 2777 : 2008 : EDT 1 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
ASTM D 5810 : 1996 : R2015 Standard Guide for Spiking into Aqueous Samples

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.