ENA TS 98-21 : ISSUE 1 1989
|
MAGNETIC PARTICLE AND DYE PENETRANT TESTING MATERIALS - CHEMICAL COMPATIBILITY AND HEALTH HAZARDS |
MIL-PRF-17331 Revision K:2013
|
LUBRICATING OIL, STEAM TURBINE AND GEAR, MODERATE SERVICE |
MIL-L-46152 Revision E:1990
|
LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ADMINISTRATIVE SERVICE, METRIC |
MIL-I-82819 Base Document:1986
|
INSULATION, THERMAL, POLYISOPRENE, SILICA & ASBESTOS FILLED |
MIL-DTL-83133 Revision J:2015
|
TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
VV L 001071 : A NOTICE 1
|
LUBRICATING OIL, STEAM CYLINDER, MINERAL |
MIL PRF 009000 : K
|
LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH-OUTPUT DIESEL |
MIL L 21260 : D
|
LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE AND BREAK IN |
MIL F 24951 : B
|
FUEL OIL RECLAIMED |
MIL L 9000 : H
|
LUBRICATING OIL, SHIPBOARD INTERNAL COMBUSTION ENGINE, HIGH OUTPUT DIESEL |
MIL P 24583 : B
|
PACKING MATERIAL. GRAPHITIC OR CARBON BRAIDED YARN |
MIL L 24467 : 0
|
LUBRICATING OIL, STEAM TURBINE, VAPOR-SPACE INHIBITED |
BS 6043-1.9:1989
|
Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode pitch Determination of sulphur content (bomb method) |
MIL-PRF-9000 Revision L:2014
|
Lubricating Oil, Shipboard Internal Combustion Engine, High-Output Diesel |
ASTM F 2191 : 2002
|
Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
ASTM D 6823 : 2008
|
Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
MIL-PRF-32034 Base Document:1998
|
Valve Packing Material, Non-Asbestos |
ASTM D 6823 : 2008 : R2013
|
Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils |
ASTM F 2191 : 2002 : R2008
|
Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
ASTM D 7578 : 2015-06
|
GUIDE FOR CALIBRATION REQUIREMENTS FOR ELEMENTAL ANALYSIS OF PETROLEUM PRODUCTS AND LUBRICANTS |
ASTM D 5177 : 1991 : R1996
|
Standard Guide for Waste Acceptance at Hazardous Waste Incinerators (Withdrawn 2005) |
ASTM E 1220 : 2016 : REDLINE
|
Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process |
ASTM F 2191/F2191M : 2013 : REDLINE
|
Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn |
ASTM D 6985 : 2004
|
Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications |
ASTM D 4771 : 2002
|
Standard Performance Specification for Knitted Upholstery Fabrics for Indoor Furniture |
ASTM D 2140 : 2008
|
Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin |
ASTM D 240 : 2017 : REDLINE
|
Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter |
MIL-DTL-83133 Revision K:2018
|
TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
BS EN 14772:2005
|
Flanges and their joints. Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
ASTM D 6975 : 2004 : R2010
|
Standard Test Method for Cummins M11 EGR Test (Withdrawn 2019) |
MIL T 83133 : D
|
TURBINE FUELS, AVIATION, KEROSENE TYPES, NATO F-34 (JP-8) AND NATO F-35 |
MIL-HDBK-510 Revision A:2014
|
AEROSPACE FUELS CERTIFICATION |
MIL T 5624 : R
|
TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
MIL H 17672 : D
|
HYDRAULIC FLUID, PETROLEUM, INHIBITED |
MIL F 46162 : D
|
FUEL, DIESEL, REFEREE GRADE |
MIL-PRF-53074 Revision A:1998
|
LUBRICATING OIL, STEAM-CYLINDER, MINERAL |
MIL-C-13783 Revision C:1983
|
COMPOUND, WATERPROOFING (FOR SMALL ARMS AMMUNITION) |
ASTM E 1418 : 2016 : REDLINE
|
Standard Practice for Visible Penetrant Testing Using the Water-Washable Process |
ASTM D 1405/D1405M : 2008
|
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
ASTM D 5290 : 1991
|
Standard Test Method for Measurement of Oil Consumption, Piston Deposits and Wear in a Heavy-Duty High Speed Diesel Engine-NTC-400 Procedure (Withdrawn 1997) |
ASTM E 1208 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process |
ASTM F 2168 : 2013 : REDLINE
|
Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring |
ASTM D 6985 : 2004 : REV A
|
Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010) |
ASTM E 1210 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process |
ASTM D 6838 : 2004 : R2010
|
Standard Test Method for Cummins M11 High Soot Test (Withdrawn 2019) |
ASTM E 257 : 1998
|
Standard Test Method for Sulfur in Organic Compounds by Sodium Peroxide Bomb Ignition |
DIN EN 14772 E : 2005
|
FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE EN 1514 AND EN 12560 SERIES OF STANDARDS |
I.S. EN 14772:2005
|
FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
EN 14772:2005
|
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |
MIL-HDBK-510-1 Revision A:2010
|
AEROSPACE FUELS CERTIFICATION |
03/114555 DC : DRAFT SEP 2003
|
EN 14772 - FLANGES AND THEIR JOINTS - QUALITY ASSURANCE INSPECTION AND TESTING OF GASKETS IN ACCORDANCE WITH THE SERIES OF STANDARDS EN 1514 AND EN 12560 |
ASTM D 2382 : 1988
|
Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) (Withdrawn 1994) |
MIL-L-6082 Revision E:1990
|
LUBRICATING OIL, AIRCRAFT PISTON ENGINE (NONDISPERSANT MINERAL OIL) |
VV-F-800 Revision E:1987
|
FUEL OIL, DIESEL |
MIL-P-24503 Revision B:1991
|
PACKING MATERIAL, GRAPHITIC, CORRUGATED RIBBON OR TEXTURED TAPE AND PREFORMED RING |
MIL-PRF-21260 Revision E:1998
|
LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATIVE BREAK-IN |
MIL-PRF-24951 Revision B:1995
|
FUEL OIL RECLAIMED |
ASTM D 4529 : 2017 : REDLINE
|
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
MIL F 16884 : J
|
FUEL, NAVAL DISTILLATE |
ASTM D 6448 : 2016 : REDLINE
|
Standard Specification for Industrial Burner Fuels from Used Lubricating Oils |
SAE J 313 : 2017
|
DIESEL FUELS |
SAE J 2361 : 1998
|
LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, PRESERVATION BREAK-IN |
ASTM E 1209 : 2010
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process |
ASTM E 1219 : 2016 : REDLINE
|
Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process |
ASTM A 771/A771M : 1995
|
Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Tubing for Liquid Metal-Cooled Reactor Core Components |
MIL PRF 16884 : K
|
FUEL, NAVAL DISTILLATE |
ESI 98-21 : ISSUE 1
|
MAGNETIC PARTICLE AND DYE PENETRANT TESTING MATERIALS - CHEMICAL COMPATIBILITY AND HEALTH HAZARDS |
MIL-DTL-5624 Revision W:2016
|
TURBINE FUEL, AVIATION, GRADES JP-4 AND JP-5 |
ASTM D 6975 : 2004
|
Standard Test Method for Cummins M11 EGR Test |
MIL P 24790 : 0
|
PACKING MATERIAL, BRAIDED, NON ASBESTOS |
MIL L 2105 : D
|
LUBRICATING OIL, GEAR, MULTI PURPOSE |
MIL-P-14796 Base Document:1968
|
Process Oil (for use with Ammunition) |
MIL-L-22851 Revision D:1990
|
LUBRICATING OIL, AIRCRAFT PISTON ENGINE, (ASHLESS DISPERSANT) |
MIL-PRF-17672 Revision E:2010
|
Hydraulic Fluid, Petroleum, Inhibited |
ASTM A 826/A826M : 1995
|
Standard Specification for Seamless Austenitic and Martensitic Stainless Steel Duct Tubes for Liquid Metal-Cooled Reactor Core Components |
ASTM D 8056 : 2016
|
Standard Guide for Elemental Analysis of Crude Oil |
ASTM D 1266 : 2018 : REDLINE
|
Standard Test Method for Sulfur in Petroleum Products (Lamp Method) |
ASTM D 3327 : 1979 : EDT 1
|
Method for Analysis of Selected Elements in Waterborne Oils |
SAE J 2359 : 1998
|
LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, MILITARY COMBAT/TACTICAL SERVICE |
SAE MS 1000 : 2013
|
LUBRICANTS, INDUSTRIAL OILS, AND RELATED PRODUCTS - CLASSIFICATION |
ASTM D 4868 : 2017 : REDLINE
|
Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels |
MIL L 2104 : F
|
LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, COMBAT TACTICAL SERVICE |
MIL-DTL-46162 Revision E:2002
|
FUEL, DIESEL, REFEREE GRADE |
ASTM D 6838 : 2004
|
Standard Test Method for Cummins M11 High Soot Test |
SAE J 1696 : 2017
|
STANDARD FUEL FILTER TEST FLUID |
ASTM D 1405/D1405M : 2008 : R2013
|
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019) |
ASTM D 2140 : 2008 : R2017
|
Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin |
ASTM D 7467 : 2017-03
|
SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20) |
ASTM D 6483 : 2004
|
Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009) |
DIN EN 14772:2005-04
|
Flanges and their joints - Quality assurance inspection and testing of gaskets in accordance with the series of standards EN 1514 and EN 12560 |