Skip to content
Please enter a keyword to search

  • ASTM D 1329 : 2016 : REDLINE

    Current The latest, up-to-date edition.

    Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)

    Available format(s):  PDF

    Language(s):  English

    Published date:  01-11-2016

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 09.01, 2015 Provides temperature-retraction procedure for rapid evaluation of crystallization effects and compares viscoelastic properties of rubber and rubber-like materials at low temperatures.

    Scope - (Show below) - (Hide below)

    1.1This test method describes a temperature-retraction procedure for rapid evaluation of crystallization effects and for comparing viscoelastic properties of rubber and rubber-like materials at low temperatures. This test method is useful when employed in conjunction with other low-temperature tests for selection of materials suitable for low-temperature service.

    1.2The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

    1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 11
    Document Type Redline
    Publisher American Society for Testing and Materials
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    SAE AMS 7254 : 2014 PERFLUOROETHER ELASTOMER
    SAE AMS 3331 : 2017 ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 65 - 75 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS
    MIL P 5516 : C PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F
    SAE AIR 1387 : 2016 DESIGNING WITH ELASTOMERS FOR USE AT LOW TEMPERATURES, NEAR OR BELOW GLASS TRANSITION
    SAE AMS 3310 : 2007 RUBBER, SILICONE FLAME RETARDANT, LOW SMOKE DENSITY, HIGH STRENGTH 65 - 75 DUROMETER COLOR WHITE
    SAE AMS 3218D : 2017 ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE-FLUID RESISTANT LOW COMPRESSION SET 85 TO 95
    SAE AMS 7259 : 2013 RUBBER: FLOUROCARBON (FKM), HIGH TEMPERATURE/FLUID RESISTANT, LOW COMPRESSION SET/85 TO 95 HARDNESS, FOR SEALS IN FUEL SYSTEMS AND SPECIFIC ENGINE OIL SYSTEMS
    SAE AMS R 25988 : 2017 RUBBER, FLUOROSILICONE ELASTOMER, OIL-AND-FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES
    SAE J 200 : 2015 CLASSIFICATION SYSTEM FOR RUBBER MATERIALS
    SAE AMS 7269 : 2003 RINGS, SEALING, SILICONE (PVMQ) RUBBER - LOW OUTGASSING, SPACE AND VACUUM SERVICE, 45-55
    ASTM D 3089 : 1997 : R2008 Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
    SAE AMS 3216 : 2017 ELASTOMER: FLUOROCARBON (FKM) RUBBER HIGH-TEMPERATURE - FLUID RESISTANT LOW COMPRESSION SET 70 TO 80
    ASTM D 3847 : 2001 : R2012 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures
    ASTM D 1414 : 2015 : REDLINE Standard Test Methods for Rubber O-Rings
    ASTM D 3847 : 2001 : R2018 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures
    ASTM D 3847 : 2001 Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures
    ASTM D 2000 : 2012 Standard Classification System for Rubber Products in Automotive Applications
    SAE J 2884 : 2014 THERMOSET ELASTOMER SPECIFICATION SYSTEM
    SAE AMS 3329 : 2017 ELASTOMER: FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT, HIGH STRENGTH 45-55 SHORE A HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS
    MIL-DTL-83528 Revision H:2018 Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for
    SAE AMS 3382 : 2017 ELASTOMER: TETRAFLUOROETHYLENE/PROPYLENE (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 75 TO 90 HARDNESS
    SAE AMS R 83248 : 2005 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
    API TR 17TR8 : 2018 HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES
    ASTM D 832 : 2007 : R2018 Standard Practice for Rubber Conditioning For Low Temperature Testing
    ASTM D 832 : 2007 : R2012 Standard Practice for Rubber Conditioning For Low Temperature Testing
    ASTM D 832 : 2007 Standard Practice for Rubber Conditioning For Low Temperature Testing
    MIL R 83322 : 0 RUBBER, CARBOXY NITROSO, NITROGEN TETROXIDE (N204) RESISTANT
    API 6J : 1992 BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL
    MIL-DTL-83397 Revision B:2009 RUBBER, POLYURETHANE, CASTABLE, HUMIDITY RESISTANT
    MIL-R-83283 Revision A:1991 RUBBER, SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE
    SAE AMS R 7362 : 2012 NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT
    SAE AMS 7255 : 2014 RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 70 TO 80
    SAE J 515 : 2015 SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS
    SAE AMS 7256 : 2014 RINGS, SEALING, TETRAFLUOROETHYLENE/PROPYLENE RUBBER (FEPM) HYDRAULIC FLUID AND SYNTHETIC OIL RESISTANT 85 TO 95
    SAE AMS P 5315 : 2013 ACRYLONITRILE-BUTADIENE (NBR) RUBBER FOR FUEL-RESISTANT SEALS 60 TO 70
    SAE AMS 3325 : 2014 FLUOROSILICONE RUBBER (FVMQ) FUEL AND OIL RESISTANT 55 - 65 DUROMETER TYPE 'A' HARDNESS FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATION OILS
    SAE AMS R 83283 : 2014 RUBBER SILICONE, HIGH STRENGTH, CABIN PRESSURE SEAL MATERIAL, DIAPHRAGM TYPE
    MIL R 83397 : A RUBBER, POLYURETHANE, CASTABLE, HUMIDITY RESISTANT
    MIL-DTL-3533 Revision C:2009 RUBBER, SYNTHETIC; SHEET, STRIP AND MOLDED
    MIL-R-83248 Revision C:1994 RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT
    MIL-DTL-25988 Revision C:2006 RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES
    MIL R 3533 : B RUBBER, SYNTHETIC, SHEET, STRIP AND MOLDED
    SAE AMS R 83485 : 2014 RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES
    SAE AMS 3328 : 2016 FLUOROSILICONE (FVMQ) RUBBER, FUEL AND OIL RESISTANT, 35-45
    SAE J 1085 : 2017 TESTING DYNAMIC PROPERTIES OF ELASTOMERIC ISOLATORS
    SAE AMS 7287 : 2012 FLUOROCARBON ELASTOMER (FKM) HIGH TEMPERATURE/HTS OIL RESISTANT/FUEL RESISTANT LOW COMPRESSION SET/70 TO 80 HARDNESS, LOW TEMPERATURE TG -22 DEGREES F (-30 DEGREES C) FOR SEALS IN OIL/FUEL/SPECIFIC HYDRAULIC SYSTEMS
    MIL R 25988 : B RUBBER, FLUOROSILICONE ELASTOMER, OIL AND FUEL RESISTANT, SHEETS, STRIPS, MOLDED PARTS AND EXTRUDED SHAPES
    SAE AMS 7257 : 2014 PERFLUOROCARBON (FFKM) ENGINE OIL, FUEL AND HYDRAULIC FLUID RESISTANT 70 TO 80 HARDNESS FOR HIGH TEMPERATURE SEALS IN ENGINE OIL SYSTEMS, FUEL SYSTEMS AND HYDRAULIC SYSTEMS
    SAE AMS 3330C : 2017 ELASTOMER: FLUOROSILICONE (FVMQ) RUBBER FUEL AND OIL RESISTANT 45-55 FOR PRODUCTS IN FUEL SYSTEMS/LUBRICATING OILS
    SAE AMS 3384 : 2013 Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 °F (-30 °C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems
    SAE AMS 7272 : 2013 RUBBER: BUTADIENE-ACRYLONITRILE (NBR) SYNTHETIC LUBRICANT RESISTANT 65 - 75 HARDNESS FOR SEALS IN SYNTHETIC LUBRICANT SYSTEMS
    ASTM D 2000 : 2012 : R2017 Standard Classification System for Rubber Products in Automotive Applications
    ASTM D 3847 : 2001 : R2007 Standard Practice for Rubber-Directions for Achieving Subnormal Test Temperatures

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM D 832 : 2007 : R2018 Standard Practice for Rubber Conditioning For Low Temperature Testing
    ASTM D 4483 : 2014-02 PRACTICE FOR EVALUATING PRECISION FOR TEST METHOD STANDARDS IN THE RUBBER AND CARBON BLACK MANUFACTURING INDUSTRIES
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective